Ive downloaded the ss5.bin bios (sparc station 5)) I have the solaris
disk and i can do the installation but can't get the disk to boot.
I can boot from the cd, mount and check the /etc/system file it has the
"set scsi_options=0x58" option i set to make it work, still not working:
Here is the output:
/ok boot disk0:d
Boot device: /iommu/sbus/espdma@5,8400000/esp@5,8800000/sd@0,0:d File
and args:
SunOS Release 5.5.1 Version Generic [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1996, Sun Microsystems, Inc.
WARNING:
/iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0
(sd1):
corrupt label - bad geometry
Label says 1310720 blocks, Drive says 883120 blocks
Cannot mount root on
/iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0:d fstype
ufs
panic: vfs_mountroot: cannot mount root
rebooting...
Resetting ... /
maybe the disk is wrong
ive try several disk one following these instructions:
1) qemu-img create -f qcow2 file.qcow2 12G
2) Add -drive file=file.qcow2,unit=3 to your qemu startup
3) Boot single user
4) echo
'disk_type="QEMU12.0G":ctlr=SCSI:ncyl=49152:acyl=0:pcyl=49152:nhead=16:nsect=32:rpm=7200'
/etc/format.dat
5) echo
'partition="QEMU12.0G":disk="QEMU12.0G":ctlr=SCSI:2=0,25165824:0=0,20971520:6=40960,4194304'
/etc/format.dat
6) format -d c0t3d0 -t 'QEMU12.0G' then label, y, and quit
7) newfs /dev/dsk/c0t3d0s0 followed by y
another downloaded from:
http://gunkies.org/wiki/Installing_Solaris_2.4_on_Qemu_SPARC
any help will be welcome
--
ITECNIS SRL <http:/www.itecnis.com>
Simplicity is the ultimate sophistication
Ignacio Geli
Implementación y Soporte