From: Fredrik Lingvall <fredrik.lingvall@gmail.com>
To: Andy Walls <awalls@md.metrocast.net>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>,
linux-media@vger.kernel.org
Subject: Re: Hauppauge HVR-900 HD
Date: Mon, 28 Nov 2011 10:34:26 +0100 [thread overview]
Message-ID: <4ED355A2.9090000@gmail.com> (raw)
In-Reply-To: <0ef2dae0-a014-4bcb-85c8-09c67fed156f@email.android.com>
On 11/26/11 15:20, Andy Walls wrote:
> Fredrik Lingvall<fredrik.lingvall@gmail.com> wrote:
>
>> On 11/25/11 23:14, Devin Heitmueller wrote:
>>> On Fri, Nov 25, 2011 at 3:54 PM, Fredrik Lingvall
>>> <fredrik.lingvall@gmail.com> wrote:
>>>> Hi All,
>>>>
>>>> I have a Hauppauge HVR-900 HD with ID 2040:b138. Is this device
>> supported,
>>>> and if so, which driver and firmware do I need?
>>> Hi Frank,
>>>
>>> It's not currently supported under Linux as it uses a demodulator
>> that
>>> there is currently no driver for. As far as I know, nobody's working
>>> on it.
>>>
>>> Regards,
>>>
>>> Devin
>>>
>> Thanks for the info Devin. I had some hope since I found this page:
>>
>> http://forum.ubuntu-it.org/index.php/topic,423395.5/wap2.html
>>
>> The dmesg output at least shows much more than I have been able to get
>> (I use 3.2.0-rc3 from the linuxtv git rep). They seem to be able to at
>> least load firmware into the device. It's in Italian so I don't
>> understand much of what they are discussing though.
>>
>> /Fredrik
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media"
>> in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> On that page they seem to have the unit recognized and a configuration for the analog side of the unit. They also mention a Silabs SI2165 DVB-T/-C demodulator which is obviously not supported.
>
> Regards,
> Andy
They had a link to the code on the page:
http://misterox.altervista.org/cx231xx_drivers/newversion_cx231xx.tar.gz
I did a (quick) comparison with that code and the code that's in
3.2.0-rc3. From what I could see it was not a quick fix to port it to
3.2.0-rc3. I will look at it a bit more to see if I can get analog to
work too (with 3.2.0-rc3).
/Fredrik
prev parent reply other threads:[~2011-11-28 9:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 20:54 Hauppauge HVR-900 HD Fredrik Lingvall
2011-11-25 22:14 ` Devin Heitmueller
2011-11-26 13:31 ` Fredrik Lingvall
2011-11-26 14:20 ` Andy Walls
2011-11-28 9:34 ` Fredrik Lingvall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ED355A2.9090000@gmail.com \
--to=fredrik.lingvall@gmail.com \
--cc=awalls@md.metrocast.net \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.