Re: Daughterboard Jetway JAD3RTLANG with three RTL-8110SC/8169SC Gigabit Ethernet is curious

[Markus Feldmann <feldmann_markus@gmx.de>]

Am 29.11.2011 10:12, schrieb Carsten Wolff:
> Hi Markus,
>
> On Monday 28 November 2011, Markus Feldmann wrote:
>> Hi All,
>>
>> i have a mini-ITX PC (Motherboard Jetway JNF92-270-LF), whit 3 ethernet
>> devices (RTL-8110SC/8169SC Gigabit Ethernet) on one additional
>> daughterboard (Jetway JAD3RTLANG).
>>
>> Here is my<hwinfo --netcard>  output:
>> http://pastebin.com/raw.php?i=Khy1NX61
>>
>> and dmesg:
>> http://pastebin.com/raw.php?i=Ziq1mizy
>>
>> I am using this mini-ITX PC as server/router with a debian
>> squeeze/stable system.
>>
>> My problem is that only one of this three ethernet devices (from the
>> daughterboard not the internal one from motherboard) at once is working
>> correctly. Sometimes i have only one client to my server connected, but
>> only one specific ehernet port is working (mostly the physically upper
>> one). I didnt found any regularity yet.
> I guess "not working" means "link detected: no" in ethtool?
>
>> Any hints? is there a specific person whom i schould contact?
> I had a similar (the same?) problems with this hardware about 2 years ago. My
> "solution" was to install windows + drivers, then throw windows away and
> install debian. After that, I had no more problems with those NICs. Since
> then, there have been some patches to the initialization code for these RTL
> Linux drivers, but maybe the windows driver installs newer firmware, too,
> which may be required for that particular product.
>
> Carsten
Hi,

You mean the latest Linux kernel was patched for a better 
initialization? At the moment i am using the kernel 3.0.8. As i 
understood the firmware must be loaded at every power on.

regards Markus