From: Saul Wold <sgw@linux.intel.com>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 1/3] ltp: Add recipe from OE
Date: Sat, 03 Dec 2011 15:39:58 -0800 [thread overview]
Message-ID: <4EDAB34E.6050103@linux.intel.com> (raw)
In-Reply-To: <658bdcf24a1ade76126924fcb937c50abce6d08d.1322840490.git.jiajun.xu@intel.com>
On 12/02/2011 07:54 AM, Jiajun Xu wrote:
> Port ltp recipe from OE and upgraged to latest version(20110915).
> Install ltp into ${D}/opt/ltp and POSIX test suite is also copied
> into ${D}/opt/ltp/testcases.
>
> TODO: Some cases are removed since they depend on command 'expect'.
> It is not in Poky or OE and we will add it for enhancement next.
>
> Signed-off-by: Jiajun Xu<jiajun.xu@intel.com>
> ---
> meta/recipes-extended/ltp/ltp_20110915.bb | 67 +++++++++++++++++++++++++++++
> 1 files changed, 67 insertions(+), 0 deletions(-)
> create mode 100644 meta/recipes-extended/ltp/ltp_20110915.bb
>
> diff --git a/meta/recipes-extended/ltp/ltp_20110915.bb b/meta/recipes-extended/ltp/ltp_20110915.bb
> new file mode 100644
> index 0000000..ff5ea47
> --- /dev/null
> +++ b/meta/recipes-extended/ltp/ltp_20110915.bb
> @@ -0,0 +1,67 @@
> +SUMMARY = "Linux Test Project"
> +DESCRIPTION = "The Linux Test Project is a joint project with SGI, IBM, OSDL, and Bull with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. The Linux Test Project is a collection of tools for testing the Linux kernel and related features."
> +HOMEPAGE = "http://ltp.sourceforge.net"
> +SECTION = "console/utils"
> +
> +PR = "r0"
> +
> +LICENSE = "GPLv2& GPLv2+& LGPLv2+& LGPLv2.1+& BSD-2-Clause"
> +SRC_URI = "${SOURCEFORGE_MIRROR}/ltp/ltp-full-${PV}.bz2"
> +
SRC_URI should go below the LIC_FILES_CHKSUM.
> +LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
> + file://testcases/kernel/mce-test/COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
> + file://testcases/kernel/controllers/freezer/COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
> + file://testcases/kernel/controllers/freezer/run_freezer.sh;startline=5;endline=17;md5=aeac3f7691caa2e76fd5a732fbd6510d \
> + file://testcases/kernel/fs/ext4-new-features/ffsb-6.0-rc2/COPYING;md5=c46082167a314d785d012a244748d803 \
> + file://testcases/kernel/hotplug/memory_hotplug/COPYING;md5=e04a2e542b2b8629bf9cd2ba29b0fe41 \
> + file://testcases/kernel/hotplug/cpu_hotplug/COPYING;md5=e04a2e542b2b8629bf9cd2ba29b0fe41 \
> + file://testcases/open_posix_testsuite/COPYING;md5=216e43b72efbe4ed9017cc19c4c68b01 \
> + file://tools/netpipe-2.4/COPYING;md5=18810669f13b87348459e611d31ab760 \
> + file://tools/netpipe-2.4-ipv6/COPYING;md5=18810669f13b87348459e611d31ab760 \
> + file://tools/top-LTP/proc/COPYING;md5=6e29c688d912da12b66b73e32b03d812 \
> + file://tools/pounder21/COPYING;md5=94d55d512a9ba36caa9b7df079bae19f \
> + file://utils/benchmark/kernbench-0.42/COPYING;md5=94d55d512a9ba36caa9b7df079bae19f \
> + "
> +
> +SRC_URI[md5sum] = "582fb78d7bf78a624a4387f29327d166"
> +SRC_URI[sha256sum] = "013f7f2f6fdf46b7d73216533c3d4c2d91f0a2cec522bf026f7c8920ede83d2c"
> +
> +export prefix = "/opt/ltp"
> +export exec_prefix = "/opt/ltp"
> +
> +inherit autotools
> +
> +FILES_${PN}-dbg += "/opt/ltp/runtest/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/testcases/bin/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/testcases/bin/*/bin/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/testcases/bin/*/test/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/scenario_groups/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/testscripts/.debug"
> +FILES_${PN}-dbg += "/opt/ltp/testscripts/open_posix_testsuite/.debug"
> +
> +FILES_${PN} += "/opt/ltp/* /opt/ltp/runtest/* /opt/ltp/scenario_groups/* /opt/ltp/testcases/bin/* /opt/ltp/testcases/bin/*/bin/* /opt/ltp/testscripts/* /opt/ltp/testcases/open_posix_testsuite/* /opt/ltp/testcases/open_posix_testsuite/conformance/* /opt/ltp/testcases/open_posix_testsuite/Documentation/* /opt/ltp/testcases/open_posix_testsuite/functional/* /opt/ltp/testcases/open_posix_testsuite/include/* /opt/ltp/testcases/open_posix_testsuite/scripts/* /opt/ltp/testcases/open_posix_testsuite/stress/* /opt/ltp/testcases/open_posix_testsuite/tools/*"
> +
> +TARGET_CC_ARCH += "${LDFLAGS}"
> +
> +do_unpack_append() {
> + bb.build.exec_func('do_extract_tarball', d)
> +}
> +
> +do_extract_tarball() {
> + if test -f ${WORKDIR}/ltp-full-${PV} ; then
> + tar x --no-same-owner -f ${WORKDIR}/ltp-full-${PV}
> + mv ${WORKDIR}/ltp-full-${PV} ${WORKDIR}/ltp-${PV}
> + fi
> +}
> +
The "mv" seems to cause a problem. Is there a reason you do this
instead of just setting "S = ${WORKDIR}/ltp-full-${PV} if that's what
the tarball normally extracts to?
ERROR: Function 'do_extract_tarball' failed (see
/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/ltp-20110915-r0/temp/log.do_unpack.714
for further information)
ERROR: Logfile of failure stored in:
/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/ltp-20110915-r0/temp/log.do_unpack.714
Log data follows:
| NOTE: Unpacking /srv/home/swold/downloads/ltp-full-20110915.bz2 to
/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/ltp-20110915-r0/
| DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common',
'common-linux', 'common-glibc', 'i586-linux', 'common']
| ERROR: Function 'do_extract_tarball' failed (see
/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/ltp-20110915-r0/temp/log.do_unpack.714
for further information)
| mv: cannot overwrite directory
`/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/ltp-20110915-r0/ltp-20110915/ltp-full-20110915'
with non-directory
NOTE: package ltp-20110915-r0: task do_unpack: Failed
ERROR: Task 2303
(/srv/home/swold/yocto-autobuilder/yocto-slave/nightly-x86/build/meta/recipes-extended/ltp/ltp_20110915.bb,
do_unpack) failed with exit code '1'
> +do_install(){
> + install -d ${D}/opt/ltp/
> + oe_runmake DESTDIR=${D} SKIP_IDCHECK=1 install
> +
> + # Copy POSIX test suite into ${D}/opt/ltp/testcases by manual
> + cp -r testcases/open_posix_testsuite ${D}/opt/ltp/testcases
> +
> + # We need to remove all scripts which depend on /usr/bin/expect, since expect is not supported in poky
> + # We will add expect for enhancement in future
> + find ${D} -type f -print | xargs grep "\!.*\/usr\/bin\/expect" | awk -F":" '{print $1}' | xargs rm -f
> +}
next prev parent reply other threads:[~2011-12-03 23:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-02 15:48 [PATCH 0/3] ltp: Add recipe from OE Jiajun Xu
2011-12-02 15:54 ` [PATCH 1/3] " Jiajun Xu
2011-12-03 23:39 ` Saul Wold [this message]
2011-12-21 15:49 ` Xu, Jiajun
2011-12-02 15:54 ` [PATCH 2/3] distro_tracking_fields: add information for ltp Jiajun Xu
2011-12-02 15:54 ` [PATCH 3/3] task-core-tools: add ltp to testapps list Jiajun Xu
-- strict thread matches above, loose matches on Subject: below --
2011-12-21 16:45 [PATCH 0/3] ltp: Add recipe from OE Jiajun Xu
2011-12-21 16:45 ` [PATCH 1/3] " Jiajun Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EDAB34E.6050103@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.