Re: [PATCH net-next v2 2/4] can: cc770: add legacy ISA bus driver for the CC770 and AN82527

[Wolfgang Zarre <info-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>]

Hello Wolfgang,

> On 11/28/2011 05:06 PM, Oliver Hartkopp wrote:
>>
>>>> ... using a reasonable default for bcr of 0x40. But you may need to
>>>> provide better values for cir, bcr and cor.
>>>>
>>>
>>> OMG, sorry that I was bothering You but You are absolutely right and with Your
>>> statement You brought be back on track and You made my day. Thank You !!!!!!
>>>
>>> I just took the values for cpu and bus I was using in my lincan driver and funny
>>> enough now it's working absolutely perfect.
>>>
>>> Module: modprobe cc770_isa irq=0xa port=0x384 indirect=1 cir=0x61 bcr=0x4A
>>>
>>> Was just sending 50000 telegrams, perfect and no problem at all.
>>>
>>> Thanks a lot again!!!!
>>>
>>
>>
>> This looks like a Tested-by :-)
>
> Wolfgang, I just sent out v4. Any chance to give this patch a try? It
> would be best to use a recent kernel version but I could also adapt the
> patch to your kernel version, 2.6.39, I think!?

Sorry for my delayed reply, but wasn't earlier possible.
Yes, of course, as long as I have the hardware available I can do some tests, even
on a recent kernel due the fact having the project so far completed, just another
test run on the 9th of December.

Due the flood of emails I lost now track which version You would be interested in
and maybe also which kernel version, so, please let me know and maybe were I may
download the patches.

>
> As you are using a CC770 chip, I'm especially interested in the relevant
> kernel log (dmesg) and "ip -d -s link show".

Should be not a problem at all.

>
> Thanks,
>
> Wolfgang.

Wolfgang