From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Date: Mon, 05 Dec 2011 17:35:52 +0000 Subject: Re: [lm-sensors] 3 wire fan on 4 pin header Message-Id: <4EDCFE28.50005@catcons.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 05/12/11 21:45, Jean Delvare wrote: > I can imagine that Asus came up with a way to detect whether the fan > connector has 3 or 4 wires, and to route the PWM signal appropriately. > I see no mention of this in the manual though. Perhaps the same was done by Gigabyte on the GA-MA770-DS3 Rev 1.0 where the same 3-wire S-Flex SFF21E was connected to the 4-pin SYS_FAN1 and was controlled by fancontrol. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors