Re: HVR-930C DVB-T mode report

[Fredrik Lingvall <fredrik.lingvall@gmail.com>]

On 12/08/11 11:12, Mauro Carvalho Chehab wrote:
>> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
>> Scanning 7MHz frequencies...
>> 177500: (time: 00:00)
>> 184500: (time: 00:03)
>>
>> [...]
>> 834000: (time: 02:46) (time: 02:48)
>> 842000: (time: 02:50)
>> 850000: (time: 02:52) (time: 02:55)
>> 858000: (time: 02:56) (time: 02:58)
>>
>> ERROR: Sorry - i couldn't get any working frequency/transponder
>>   Nothing to scan!!
>
>
> With regards to Italy, w_scan does something different than scan. The 
> auto-italy
> table used by scan tries several channels with both 8MHz and 7MHz, 
> while w_scan
> only tries 7MHz for VHF. This might explain the issue, if you're still 
> able to
> scan/tune with scan and if you have a good antenna.
>>
>>
>> Regards
>>
>> Eddi
>
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Are there similar problems while scanning DVB-C nets with w_scan?

And, is there a "scan everything" table for dvbscan?

Regards,

Fredrik