From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Cousson, Benoit" <b-cousson-l0cyMroinI0@public.gmane.org>
Subject: Re: TI OMAP device tree and DSPs?
Date: Thu, 8 Dec 2011 22:07:54 +0100
Message-ID: <4EE1272A.7090901@ti.com>
References: <F9C60F6C-BC0A-4987-B59E-DCCBD249424D@kernel.crashing.org>
 <4EE0ECB5.2030407@ti.com>
 <D7CA9494-73D0-4251-9A3E-F71206263D4A@kernel.crashing.org>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
In-Reply-To: <D7CA9494-73D0-4251-9A3E-F71206263D4A-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
List-Unsubscribe: <https://lists.ozlabs.org/options/devicetree-discuss>,
 <mailto:devicetree-discuss-request-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org?subject=unsubscribe>
List-Archive: <http://lists.ozlabs.org/pipermail/devicetree-discuss>
List-Post: <mailto:devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
List-Help: <mailto:devicetree-discuss-request-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org?subject=help>
List-Subscribe: <https://lists.ozlabs.org/listinfo/devicetree-discuss>,
 <mailto:devicetree-discuss-request-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org?subject=subscribe>
Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Sender: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
To: Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Cc: "devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Discuss" <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
List-Id: devicetree@vger.kernel.org

On 12/8/2011 10:03 PM, Kumar Gala wrote:
> 
> On Dec 8, 2011, at 10:58 AM, Cousson, Benoit wrote:
> 
>> On 12/8/2011 5:07 PM, Kumar Gala wrote:
>>> Seen a lot of ARM&   TI OMAP discussions on this list.  I was
>>> wondering if the DSPs on any devices that have ARM + DSP are
>>> represented in the device trees yet.
>>
>> So far, for the OMAP case, the DSP node is mostly empty.
>>
>> The issue is that I'm not sure we can represent in the same DT both MPU and DSP view, since the DT root is supposed to represent a processor.
>> If we need the real DSP viewpoint, we will have to mostly duplicate the MPU view then remove MPU private peripherals and add the DSP private peripherals.
>>
>> Regards,
>> Benoit
> 
> Is there pointer to an example dts that show whatever you have for DSP ?

Well this is really empty :-)

Extract from the arch/arm/dts/omap3.dtsi

	soc {
		compatible = "ti,omap-infra";
		mpu {
			compatible = "ti,omap3-mpu";
			ti,hwmods = "mpu";
		};

		iva {
			compatible = "ti,iva2.2";
			ti,hwmods = "iva";

			dsp {
				compatible = "ti,omap3-c64";
			};
		};
	};

Regards,
Benoit