All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Emelyanov <xemul@parallels.com>
To: David Miller <davem@davemloft.net>,
	Linux Netdev List <netdev@vger.kernel.org>
Subject: [PATCH 5/13] inet_diag: Split inet_diag_get_exact into parts
Date: Fri, 09 Dec 2011 20:22:26 +0400	[thread overview]
Message-ID: <4EE235C2.206@parallels.com> (raw)
In-Reply-To: <4EE23561.5020804@parallels.com>

Similar to previous patch: the 1st part locks the inet handler
and will get generalized and the 2nd one dumps icsk-s and will
be used by TCP and DCCP handlers.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

---
 net/ipv4/inet_diag.c |   28 ++++++++++++++++------------
 1 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 64abe47..f50df2e 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -709,19 +709,11 @@ out:
 	return err;
 }
 
-static int __inet_diag_dump(struct sk_buff *skb, struct netlink_callback *cb,
-		struct inet_diag_req *r, struct nlattr *bc)
+static void inet_diag_dump_icsk(struct inet_hashinfo *hashinfo, struct sk_buff *skb,
+		struct netlink_callback *cb, struct inet_diag_req *r, struct nlattr *bc)
 {
 	int i, num;
 	int s_i, s_num;
-	const struct inet_diag_handler *handler;
-	struct inet_hashinfo *hashinfo;
-
-	handler = inet_diag_lock_handler(r->sdiag_protocol);
-	if (IS_ERR(handler))
-		goto unlock;
-
-	hashinfo = handler->idiag_hashinfo;
 
 	s_i = cb->args[1];
 	s_num = num = cb->args[2];
@@ -790,7 +782,7 @@ skip_listen_ht:
 	}
 
 	if (!(r->idiag_states & ~(TCPF_LISTEN | TCPF_SYN_RECV)))
-		goto unlock;
+		goto out;
 
 	for (i = s_i; i <= hashinfo->ehash_mask; i++) {
 		struct inet_ehash_bucket *head = &hashinfo->ehash[i];
@@ -863,8 +855,20 @@ next_dying:
 done:
 	cb->args[1] = i;
 	cb->args[2] = num;
-unlock:
+out:
+	;
+}
+
+static int __inet_diag_dump(struct sk_buff *skb, struct netlink_callback *cb,
+		struct inet_diag_req *r, struct nlattr *bc)
+{
+	const struct inet_diag_handler *handler;
+
+	handler = inet_diag_lock_handler(r->sdiag_protocol);
+	if (!IS_ERR(handler))
+		inet_diag_dump_icsk(handler->idiag_hashinfo, skb, cb, r, bc);
 	inet_diag_unlock_handler(handler);
+
 	return skb->len;
 }
 
-- 
1.5.5.6

  parent reply	other threads:[~2011-12-09 16:22 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-09 16:20 [PATCH 0/13] Implement dumping udp sockets via sock_diag netlink Pavel Emelyanov
2011-12-09 16:21 ` [PATCH 1/13] inet_diag: Remove indirect sizeof from inet diag handlers Pavel Emelyanov
2011-12-09 16:21 ` [PATCH 2/13] inet_diag: Reduce the number of args for bytecode run routine Pavel Emelyanov
2011-12-09 16:21 ` [PATCH 3/13] inet_diag: Export inet diag cookie checking routine Pavel Emelyanov
2011-12-09 16:22 ` [PATCH 4/13] inet_diag: Split inet_diag_get_exact into parts Pavel Emelyanov
2011-12-09 16:22 ` Pavel Emelyanov [this message]
2011-12-09 16:22 ` [PATCH 6/13] inet_diag: Introduce the byte-code run on an inet socket Pavel Emelyanov
2011-12-09 16:23 ` [PATCH 7/13] inet_diag: Introduce the inet socket dumping routine Pavel Emelyanov
2011-12-09 16:23 ` [PATCH 8/13] inet_diag: Generalize inet_diag dump and get_exact calls Pavel Emelyanov
2011-12-09 16:23 ` [PATCH 9/13] udp: Export code sk lookup routines Pavel Emelyanov
2011-12-09 16:23 ` [PATCH 10/13] udp_diag: Basic skeleton Pavel Emelyanov
2011-12-09 16:24 ` [PATCH 11/13] udp_diag: Implement the get_exact dumping functionality Pavel Emelyanov
2011-12-09 21:48   ` Eric Dumazet
2011-12-10  9:07     ` Pavel Emelyanov
2011-12-10  9:33       ` [PATCH 1/2] udp_diag: Make it module when ipv6 is a module Pavel Emelyanov
2011-12-10  9:35         ` [PATCH 2/2] udp_diag: Fix the !ipv6 case Pavel Emelyanov
2011-12-10 11:02           ` Eric Dumazet
2011-12-10 18:15             ` David Miller
2011-12-10 19:48               ` [PATCH net-next] net: use IS_ENABLED(CONFIG_IPV6) Eric Dumazet
2011-12-10 22:00                 ` [PATCH net-next] drivers/net: " Joe Perches
2011-12-10 22:29                   ` Eric Dumazet
2011-12-11  0:51                     ` Joe Perches
2011-12-11  8:52                       ` Eric Dumazet
2011-12-13  0:06                         ` Joe Perches
2011-12-11 23:34                 ` [PATCH net-next] net: " David Miller
2011-12-10 11:00         ` [PATCH 1/2] udp_diag: Make it module when ipv6 is a module Eric Dumazet
2011-12-10 18:15           ` David Miller
2011-12-09 16:24 ` [PATCH 12/13] udp_diag: Implement the dump-all functionality Pavel Emelyanov
2011-12-09 16:24 ` [PATCH 13/13] udp_diag: Wire the udp_diag module into kbuild Pavel Emelyanov
2011-12-09 16:26 ` [PATCH] iproute: Dump UDP sockets via netlink Pavel Emelyanov
2011-12-09 19:19 ` [PATCH 0/13] Implement dumping udp sockets via sock_diag netlink David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EE235C2.206@parallels.com \
    --to=xemul@parallels.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.