From: "Berck E. Nash" <flyboy@gmail.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: x2apic boot failure on recent sandy bridge system
Date: Fri, 09 Dec 2011 18:56:03 -0700 [thread overview]
Message-ID: <4EE2BC33.80902@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 317 bytes --]
X2APIC has never worked on this system, and continues to not work
3.2.0-rc5. Simply hangs on boot with an error message that helpfully
indicates that x2apic is the problem. The system is an ASRock P67
Extreme 6. Log attached, let me know if I can do anything to help.
Please cc as I'm not subscribed.
Berck Nash
[-- Attachment #2: x2apic.log --]
[-- Type: text/plain, Size: 7536 bytes --]
[ 0.000000] Linux version 3.2.0-rc5 (berck@luna) (gcc version 4.6.2 (Debian 4.6.2-6) ) #2 SMP Fri Dec 9 18:16:28 MST 2011
[ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beee2000 (usable)
[ 0.000000] BIOS-e820: 00000000beee2000 - 00000000bef3a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef3a000 - 00000000bf607000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf607000 - 00000000bf608000 (usable)
[ 0.000000] BIOS-e820: 00000000bf608000 - 00000000bf609000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf609000 - 00000000bf613000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf613000 - 00000000bf638000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf638000 - 00000000bf67b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf67b000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023f800000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bef32068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bef398f8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000bef32150 077A6 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf60af80 00040
[ 0.000000] ACPI: APIC 00000000bef399f0 000D8 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bef39ac8 001DE (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bef39ca8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bef39ce8 0006F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bef39d58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023f800000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023f800000
[ 0.000000] NODE_DATA [000000023f7fb000 - 000000023f7fffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000beee2
[ 0.000000] 0: 0x000bf607 -> 0x000bf608
[ 0.000000] 0: 0x000bf67b -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x0023f800
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x01] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x03] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x04] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x05] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x06] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x07] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x08] enabled)
[ 0.000000] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88023f400000 s70976 r8192 d23232 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058767
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz root=/dev/sdb1 ro video=efifb console=ttyS0,115200n8 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175908k/9428992k available (3610k kernel code, 1065004k absent, 188080k reserved, 1567k data, 672k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3392.514 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6785.02 BogoMIPS (lpj=3392514)
[ 0.010594] pid_max: default: 32768 minimum: 301
[ 0.015470] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023753] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031298] Mount-cache hash table entries: 256
[ 0.035893] CPU: Physical Processor ID: 0
[ 0.039900] CPU: Processor Core ID: 0
[ 0.043557] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.043558] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.056570] mce: CPU supports 9 MCE banks
[ 0.060577] CPU0: Thermal monitoring enabled (TM1)
[ 0.065360] using mwait in idle threads.
[ 0.069332] Freeing SMP alternatives: 20k freed
[ 0.073857] ACPI: Core revision 20110623
[ 0.085717] Kernel panic - not syncing: x2apic: enabled by BIOS but kernel init failed.
[ 0.093697] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc5 #2
[ 0.099337] Call Trace:
[ 0.101788] [<ffffffff8137b7ce>] ? panic+0x95/0x18e
[ 0.106755] [<ffffffff81016259>] ? __ioapic_write_entry+0x16/0x32
[ 0.112925] [<ffffffff8152d5bf>] ? enable_IR_x2apic+0x19a/0x1d7
[ 0.118913] [<ffffffff8152f281>] ? default_setup_apic_routing+0xd/0x71
[ 0.125506] [<ffffffff8152c536>] ? native_smp_prepare_cpus+0x2f1/0x325
[ 0.132102] [<ffffffff81522abf>] ? kernel_init+0x46/0x10f
[ 0.137571] [<ffffffff813841f4>] ? kernel_thread_helper+0x4/0x10
[ 0.143650] [<ffffffff81522a79>] ? start_kernel+0x341/0x341
[ 0.149297] [<ffffffff813841f0>] ? gs_change+0xb/0xb
next reply other threads:[~2011-12-10 1:56 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-10 1:56 Berck E. Nash [this message]
2011-12-10 20:17 ` x2apic boot failure on recent sandy bridge system Yinghai Lu
2011-12-10 22:58 ` Berck E. Nash
2011-12-10 23:11 ` Yinghai Lu
2011-12-11 7:57 ` Ingo Molnar
2011-12-11 21:43 ` Yinghai Lu
2011-12-11 22:05 ` Berck E. Nash
2011-12-12 3:40 ` Yinghai Lu
2011-12-12 23:21 ` Berck E. Nash
2011-12-13 0:25 ` Suresh Siddha
2011-12-13 1:29 ` Yinghai Lu
2011-12-13 1:41 ` Suresh Siddha
2011-12-13 4:32 ` Yinghai Lu
2011-12-13 5:13 ` Yinghai Lu
2011-12-16 13:59 ` Berck E. Nash
2011-12-18 8:47 ` Ingo Molnar
2011-12-12 23:42 ` H. Peter Anvin
2011-12-13 1:25 ` Yinghai Lu
2011-12-12 7:23 ` Suresh Siddha
[not found] <fa.1zfuXwqYK6u81uBoo3IdpawcpWw@ifi.uio.no>
[not found] ` <fa.p3cpkKIGUNv0/iot3o7KT9bb98M@ifi.uio.no>
[not found] ` <fa.iPHW7usT23k+cCA19L3eXEDu91Q@ifi.uio.no>
[not found] ` <fa.7eOK+XcsKUWU4ZXhBj2K6znxrvc@ifi.uio.no>
[not found] ` <fa.VGxfKOh1Z07X1TXm5PxMIlV4xu8@ifi.uio.no>
[not found] ` <fa.eH+BpYDdp4xIWE4V+wJu6hFrVxM@ifi.uio.no>
2012-10-19 20:42 ` rrl125
2012-10-19 23:03 ` Suresh Siddha
2012-10-19 23:32 ` Yinghai Lu
2012-10-19 23:36 ` H. Peter Anvin
2012-10-20 0:02 ` Suresh Siddha
2012-10-20 0:41 ` Yinghai Lu
-- strict thread matches above, loose matches on Subject: below --
2011-12-10 1:46 Berck E. Nash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE2BC33.80902@gmail.com \
--to=flyboy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.