[PATCH 1/7] arm/imx6: add imx6q sabrelite board support

[robherring2@gmail.com (Rob Herring)]

On 12/11/2011 11:40 PM, Shawn Guo wrote:
> On Mon, Dec 12, 2011 at 11:42:26AM +0800, Richard Zhao wrote:
>> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
>> ---
>>  arch/arm/boot/dts/imx6q-sabrelite.dts |   54 +++++++++++++++++++++++++++++++++
>>  arch/arm/mach-imx/mach-imx6q.c        |    1 +
>>  2 files changed, 55 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/imx6q-sabrelite.dts
>>
>> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
>> new file mode 100644
>> index 0000000..d54363f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
>> @@ -0,0 +1,54 @@
>> +/*
>> + * Copyright 2011 Freescale Semiconductor, Inc.
>> + * Copyright 2011 Linaro Ltd.
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +/dts-v1/;
>> +/include/ "imx6q.dtsi"
>> +
>> +/ {
>> +	model = "Freescale i.MX6 Quad SABRE Lite Board";
>> +	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
>> +
>> +	chosen {
>> +		bootargs = "console=ttymxc1,115200";
>> +	};
>> +
> Maybe we can start dropping this, since kernel is now able to get
> bootargs from atags even in case that bootloader can not pass dtb
> and the dtb is appended to kernel image.
> 
>> +	memory {
>> +		reg = <0x10000000 0x40000000>;
>> +	};
>> +
>> +	soc {
>> +		aips-bus at 02100000 { /* AIPS2 */
>> +			enet at 02188000 {
>> +				phy-mode = "rgmii";
>> +				local-mac-address = [01 04 9F 01 1B 61];
> 
> Do we still have no way to figure the mac address from hardware setup
> (fuse or something) on sabrelite board?
> 
>> +				phy-reset-gpios = <&gpio2 23 0>; /* gpio3 23 */
> 
> Nit: If you want to comment it, please comment it in the consistent way,
> which is '/* GPIO3_23 */'.

Better yet, why don't you name the phandles starting at 1 so the comment
isn't needed at all.

Rob