From: Randy Dunlap <rdunlap@xenotime.net>
To: NeilBrown <neilb@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>,
rpurdie@rpsys.net, linux-kernel@vger.kernel.org,
Stephen Rothwell <sfr@canb.auug.org.au>
Subject: Re: [PATCH 1/2] leds-tca6507: allow driver to compile when GPIOLIB is not available.
Date: Mon, 19 Dec 2011 12:34:18 -0800 [thread overview]
Message-ID: <4EEF9FCA.4040401@xenotime.net> (raw)
In-Reply-To: <20111219002022.23170.36881.stgit@notabene.brown>
On 12/18/2011 04:20 PM, NeilBrown wrote:
> This driver can configure the outputs as GPIO line instead of LEDs. But
> that only works if GPIOLIB is available. So make that code conditional
> on the library's availability.
>
> Also remove the 'teardown' callback as it is never called and should
> never be needed.
>
> Reported-by: Randy Dunlap <rdunlap@xenotime.net>,
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>,
> Signed-off-by: NeilBrown <neilb@suse.de>
Hi Neil,
with linux-next 20111219 and this patch applied, I now get:
drivers/leds/leds-tca6507.c: In function 'tca6507_remove':
drivers/leds/leds-tca6507.c:677:9: error: 'struct tca6507_chip' has no member named 'gpio'
drivers/leds/leds-tca6507.c:678:3: error: implicit declaration of function 'gpiochip_remove'
drivers/leds/leds-tca6507.c:678:33: error: 'struct tca6507_chip' has no member named 'gpio'
when GPIOLIB is not enabled.
> ---
>
> drivers/leds/leds-tca6507.c | 75 +++++++++++++++++++++++++++++-------------
> include/linux/leds-tca6507.h | 3 +-
> 2 files changed, 53 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
> index a7ea4cf..c9cc3f7 100644
> --- a/drivers/leds/leds-tca6507.c
> +++ b/drivers/leds/leds-tca6507.c
> @@ -149,9 +149,11 @@ struct tca6507_chip {
> int bank; /* Bank used, or -1 */
> int blink; /* 1 if we are hardware-blinking */
> } leds[NUM_LEDS];
> +#ifdef CONFIG_GPIOLIB
> struct gpio_chip gpio;
> const char *gpio_name[NUM_LEDS];
> int gpio_map[NUM_LEDS];
> +#endif
> };
>
> static const struct i2c_device_id tca6507_id[] = {
> @@ -520,6 +522,7 @@ static int tca6507_blink_set(struct led_classdev *led_cdev,
> return 0;
> }
>
> +#ifdef CONFIG_GPIOLIB
> static void tca6507_gpio_set_value(struct gpio_chip *gc,
> unsigned offset, int val)
> {
> @@ -542,6 +545,51 @@ static int tca6507_gpio_direction_output(struct gpio_chip *gc,
> tca6507_gpio_set_value(gc, offset, val);
> return 0;
> }
> +static int tca6507_probe_gpios(struct i2c_client *client,
> + struct tca6507_chip *tca,
> + struct tca6507_platform_data *pdata)
> +{
> + int err;
> + int i = 0;
> + int gpios = 0;
> +
> + for (i = 0; i < NUM_LEDS; i++)
> + if (pdata->leds.leds[i].name && pdata->leds.leds[i].flags) {
> + /* Configure as a gpio */
> + tca->gpio_name[gpios] = pdata->leds.leds[i].name;
> + tca->gpio_map[gpios] = i;
> + gpios++;
> + }
> +
> + if (!gpios)
> + return 0;
> +
> + tca->gpio.label = "gpio-tca6507";
> + tca->gpio.names = tca->gpio_name;
> + tca->gpio.ngpio = gpios;
> + tca->gpio.base = pdata->gpio_base;
> + tca->gpio.owner = THIS_MODULE;
> + tca->gpio.direction_output = tca6507_gpio_direction_output;
> + tca->gpio.set = tca6507_gpio_set_value;
> + tca->gpio.dev = &client->dev;
> + err = gpiochip_add(&tca->gpio);
> + if (err) {
> + tca->gpio.ngpio = 0;
> + return err;
> + }
> + if (pdata->setup)
> + pdata->setup(tca->gpio.base, tca->gpio.ngpio);
> + return 0;
> +}
> +
> +#else /* CONFIG_GPIOLIB */
> +static int tca6507_probe_gpios(struct i2c_client *client,
> + struct tca6507_chip *tca,
> + struct tca6507_platform_data *pdata)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_GPIOLIB */
>
> static int __devinit tca6507_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> @@ -551,7 +599,6 @@ static int __devinit tca6507_probe(struct i2c_client *client,
> struct tca6507_platform_data *pdata;
> int err;
> int i = 0;
> - int gpios = 0;
>
> adapter = to_i2c_adapter(client->dev.parent);
> pdata = client->dev.platform_data;
> @@ -590,30 +637,10 @@ static int __devinit tca6507_probe(struct i2c_client *client,
> if (err < 0)
> goto exit;
> }
> - if (pdata->leds.leds[i].name && pdata->leds.leds[i].flags) {
> - /* Configure as a gpio */
> - tca->gpio_name[gpios] = pdata->leds.leds[i].name;
> - tca->gpio_map[gpios] = i;
> - gpios++;
> - }
> - }
> - if (gpios) {
> - tca->gpio.label = "gpio-tca6507";
> - tca->gpio.names = tca->gpio_name;
> - tca->gpio.ngpio = gpios;
> - tca->gpio.base = pdata->gpio_base;
> - tca->gpio.owner = THIS_MODULE;
> - tca->gpio.direction_output = tca6507_gpio_direction_output;
> - tca->gpio.set = tca6507_gpio_set_value;
> - tca->gpio.dev = &client->dev;
> - err = gpiochip_add(&tca->gpio);
> - if (err) {
> - tca->gpio.ngpio = 0;
> - goto exit;
> - }
> - if (pdata->setup)
> - pdata->setup(tca->gpio.base, tca->gpio.ngpio);
> }
> + err = tca6507_probe_gpios(client, tca, pdata);
> + if (err)
> + goto exit;
> i2c_set_clientdata(client, tca);
> /* set all registers to known state - zero */
> tca->reg_set = 0x7f;
> diff --git a/include/linux/leds-tca6507.h b/include/linux/leds-tca6507.h
> index 3b8ac62..dcabf4f 100644
> --- a/include/linux/leds-tca6507.h
> +++ b/include/linux/leds-tca6507.h
> @@ -24,9 +24,10 @@
>
> struct tca6507_platform_data {
> struct led_platform_data leds;
> +#ifdef CONFIG_GPIOLIB
> int gpio_base;
> void (*setup)(unsigned gpio_base, unsigned ngpio);
> - void (*teardown)(unsigned gpio_base, unsigned ngpio);
> +#endif
> };
>
> #define TCA6507_MAKE_GPIO 1
>
>
> --
--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
next prev parent reply other threads:[~2011-12-19 19:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-19 0:20 [PATCH 0/2] Two fixes for leds-tca6507 NeilBrown
2011-12-19 0:20 ` [PATCH 2/2] leds-tca6507 - fix off by one error NeilBrown
2011-12-19 0:20 ` [PATCH 1/2] leds-tca6507: allow driver to compile when GPIOLIB is not available NeilBrown
2011-12-19 20:34 ` Randy Dunlap [this message]
2011-12-20 5:37 ` NeilBrown
-- strict thread matches above, loose matches on Subject: below --
2011-12-20 5:44 [PATCH 0/2] Two fixes for leds-tca6507 - Version 2 NeilBrown
2011-12-20 5:44 ` [PATCH 1/2] leds-tca6507: allow driver to compile when GPIOLIB is not available NeilBrown
2011-12-20 20:16 ` Randy Dunlap
2011-12-20 20:26 ` Randy Dunlap
2011-12-20 21:03 ` NeilBrown
2011-12-20 22:23 ` Andrew Morton
2011-12-30 0:35 ` NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EEF9FCA.4040401@xenotime.net \
--to=rdunlap@xenotime.net \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
--cc=rpurdie@rpsys.net \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.