[Qemu-devel] [PATCH 1/9] arm: add missing scu registers

[Mark Langsdorf <mark.langsdorf@calxeda.com>]

From: Rob Herring <rob.herring@calxeda.com>

Add power control and non-secure access ctrl registers

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
  hw/a9mpcore.c |   26 ++++++++++++++++++++++++--
  1 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/hw/a9mpcore.c b/hw/a9mpcore.c
index cd2985f..6e03fad 100644
--- a/hw/a9mpcore.c
+++ b/hw/a9mpcore.c
@@ -29,6 +29,7 @@ gic_get_current_cpu(void)
  typedef struct a9mp_priv_state {
      gic_state gic;
      uint32_t scu_control;
+    uint32_t scu_status;
      uint32_t old_timer_status[8];
      uint32_t num_cpu;
      qemu_irq *timer_irq;
@@ -48,7 +49,13 @@ static uint64_t a9_scu_read(void *opaque, 
target_phys_addr_t offset,
      case 0x04: /* Configuration */
          return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
      case 0x08: /* CPU Power Status */
-        return 0;
+        return s->scu_status;
+    case 0x09: /* CPU status.  */
+        return s->scu_status >> 8;
+    case 0x0a: /* CPU status.  */
+        return s->scu_status >> 16;
+    case 0x0b: /* CPU status.  */
+        return s->scu_status >> 24;
      case 0x0c: /* Invalidate All Registers In Secure State */
          return 0;
      case 0x40: /* Filtering Start Address Register */
@@ -73,6 +80,22 @@ static void a9_scu_write(void *opaque, 
target_phys_addr_t offset,
          break;
      case 0x4: /* Configuration: RO */
          break;
+    case 0x08: /* Power Control  */
+        s->scu_status &= ~0xff;
+        s->scu_status |= value & 0xff;
+        break;
+    case 0x09: /* Power Control  */
+        s->scu_status &= ~(0xff << 8);
+        s->scu_status |= (value & 0xff) << 8;
+        break;
+    case 0x0A: /* Power Control  */
+        s->scu_status &= ~(0xff << 16);
+        s->scu_status |= (value & 0xff) << 16;
+        break;
+    case 0x0B: /* Power Control  */
+        s->scu_status &= ~(0xff << 24);
+        s->scu_status |= (value & 0xff) << 24;
+        break;
      case 0x0c: /* Invalidate All Registers In Secure State */
          /* no-op as we do not implement caches */
          break;
@@ -80,7 +103,6 @@ static void a9_scu_write(void *opaque, 
target_phys_addr_t offset,
      case 0x44: /* Filtering End Address Register */
          /* RAZ/WI, like an implementation with only one AXI master */
          break;
-    case 0x8: /* CPU Power Status */
      case 0x50: /* SCU Access Control Register */
      case 0x54: /* SCU Non-secure Access Control Register */
          /* unimplemented, fall through */
-- 
1.7.5.4