From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-tegra/next
Date: Thu, 22 Dec 2011 22:07:53 +0100 [thread overview]
Message-ID: <4EF39C29.3040409@aribaud.net> (raw)
In-Reply-To: <7E91C59574E9954FA075F8D8CCDF78DB3A2037F1EB@HQMAIL04.nvidia.com>
Le 22/12/2011 21:59, Tom Warren a ?crit :
> Albert,
>
> Please pull u-boot-tegra/next. Thanks. Happy holidays!
When I get such a request to 'pull .../next', I am never completely sure
which branch of u-boot-arm I should be pulling into: is this supposed to
be pulled into next or master? It *looks* like it is for next, but I
want to be sure.
In such cases, I tend to try and find out based on the u-boot-arm or
u-boot branch the changes are based upon, but here:
> The following changes since commit 953209bf5ef0889a1baa02aa0ed5324f53ff8fda:
>
> arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints (2011-12-11 13:56:57 +0100)
This commit corresponds to no branch of u-boot-arm or u-boot at the
moment. What repo and branch was u-boot-tegra rebased onto before the
pull request?
> are available in the git repository at:
> git://git.denx.de/u-boot-tegra.git next
>
> Simon Glass (14):
> tegra2: Tidy UART selection
> tegra2: Add UARTB support
> tegra2: config: Enable SPI flash on Seaboard
> tegra2: Enable SPI environment on Seaboard
> tegra2: Implement SPI / UART GPIO switch
> tegra2: spi: Support SPI / UART switch
> tegra2: Plumb in SPI/UART switch code
> tegra: Fix build error in plutux, medcom
> tegra: Move cpu_init_cp15() to arch_cpu_init()
> tegra: Move clock_early_init() to arch_cpu_init()
> tegra: add clock_ll_start_uart() to enable UART prior to reloc
> tegra: Add a function mux feature
> tegra: Add support for UART init in cpu board.c
> tegra: Move boards over to use arch-level board UART function
>
> Stephen Warren (1):
> tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES
>
> Thierry Reding (7):
> tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
> tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
> tegra2: Move tegra2_mmc_init() prototype to public header.
> tegra2: Add common Avionic Design Tamonten support.
> tegra2: Add Avionic Design Plutux support.
> tegra2: Add Avionic Design Medcom support.
> tegra2: Optimize out-of-tree build for Ventana.
>
> Tom Warren (2):
> tegra2: spi: Add SPI driver for Tegra2 SOC
> arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
>
> MAINTAINERS | 5 +
> arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
> arch/arm/cpu/armv7/tegra2/board.c | 58 ++++
> arch/arm/cpu/armv7/tegra2/clock.c | 14 +
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++
> arch/arm/include/asm/arch-tegra2/board.h | 30 ++
> arch/arm/include/asm/arch-tegra2/clock.h | 11 +
> arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++
> arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
> arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++
> arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++
> board/avionic-design/common/tamonten.c | 116 ++++++++
> board/avionic-design/common/tamonten.h | 32 +++
> board/avionic-design/medcom/Makefile | 50 ++++
> board/avionic-design/medcom/medcom.c | 45 ++++
> board/avionic-design/plutux/Makefile | 50 ++++
> board/avionic-design/plutux/plutux.c | 45 ++++
> board/nvidia/common/Makefile | 47 ++++
> board/nvidia/common/board.c | 73 +----
> board/nvidia/common/board.h | 2 +-
> board/nvidia/common/uart-spi-switch.c | 138 ++++++++++
> board/nvidia/harmony/Makefile | 1 -
> board/nvidia/harmony/harmony.c | 2 +-
> board/nvidia/seaboard/Makefile | 1 -
> board/nvidia/seaboard/seaboard.c | 5 +-
> board/nvidia/ventana/Makefile | 5 +-
> boards.cfg | 2 +
> drivers/mmc/tegra2_mmc.h | 2 -
> drivers/spi/Makefile | 1 +
> drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++
> include/configs/harmony.h | 3 +
> include/configs/medcom.h | 64 +++++
> include/configs/plutux.h | 64 +++++
> include/configs/seaboard.h | 20 ++
> include/configs/tegra2-common.h | 7 +-
> include/configs/ventana.h | 3 +
> 38 files changed, 1355 insertions(+), 73 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
> create mode 100644 board/avionic-design/common/tamonten.c
> create mode 100644 board/avionic-design/common/tamonten.h
> create mode 100644 board/avionic-design/medcom/Makefile
> create mode 100644 board/avionic-design/medcom/medcom.c
> create mode 100644 board/avionic-design/plutux/Makefile
> create mode 100644 board/avionic-design/plutux/plutux.c
> create mode 100644 board/nvidia/common/Makefile
> create mode 100644 board/nvidia/common/uart-spi-switch.c
> create mode 100644 drivers/spi/tegra2_spi.c
> create mode 100644 include/configs/medcom.h
> create mode 100644 include/configs/plutux.h
And then:
> -----------------------------------------------------------------------------------
> This email message is for the sole use of the intended recipient(s) and may contain
> confidential information. Any unauthorized review, use, disclosure or distribution
> is prohibited. If you are not the intended recipient, please contact the sender by
> reply email and destroy all copies of the original message.
> -----------------------------------------------------------------------------------
Please remove this from messages on the list.
Amicalement,
--
Albert.
next prev parent reply other threads:[~2011-12-22 21:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-22 20:59 [U-Boot] Pull request: u-boot-tegra/next Tom Warren
2011-12-22 21:07 ` Albert ARIBAUD [this message]
2011-12-22 21:51 ` Tom Warren
2011-12-22 22:51 ` Albert ARIBAUD
2011-12-22 23:17 ` Tom Warren
2011-12-23 15:07 ` Albert ARIBAUD
2011-12-23 16:06 ` Wolfgang Denk
2011-12-23 17:12 ` Albert ARIBAUD
2011-12-23 18:30 ` Wolfgang Denk
2011-12-23 22:15 ` Albert ARIBAUD
2011-12-22 21:08 ` Stephen Warren
2011-12-22 21:53 ` Tom Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EF39C29.3040409@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.