From: Jens Rehpoehler <jens.rehpoehler@filoo.de>
To: ceph-devel@vger.kernel.org
Subject: small bug ?
Date: Sun, 08 Jan 2012 11:06:19 +0100 [thread overview]
Message-ID: <4F096A9B.4020207@filoo.de> (raw)
Hi all,
i just got an kernel oops and want to describe what i've done:
root@cephnode3:~# rbd map data/vm-905-disk-1.rbd
[153462.346359] libceph: mon0 10.0.0.10:6789 session established
[153462.382244] rbd0: p1 p2 < p5 >
[153462.382496] rbd: rbd0: added with size 0x200000000
-> everything ist fine
root@cephnode3:~# mount /dev/rbd0p1 /mnt/
-> works .... i can access my files in /mnt
next i didn't unmount /mnt but "unmapped" the rbd0 device
root@cephnode3:/# rbd unmap /dev/rbd0
-> works without any error message (should this work with a mounted
filesystem to /mnt ?)
df shows:
/dev/rbd0p1 7867856 714560 6753632 10% /mnt
If i unmount the /mnt mountpoint now -> everything is fine.
but: if i forget to unmount /mnt und map another rbd file:
root@cephnode3:/# rbd map data/vm-906-disk-1.rbd
Message from syslogd@cephnode3 at Jan 8 10:59:46 ...
kernel:[153891.372190] ------------[ cut here ]------------
Message from syslogd@cephnode3 at Jan 8 10:59:46 ...
kernel:[153891.372241] invalid opcode: 0000 [#1] SMP
Message from syslogd@cephnode3 at Jan 8 10:59:46 ...
kernel:[153891.373120] Stack:
Message from syslogd@cephnode3 at Jan 8 10:59:46 ...
kernel:[153891.373291] Call Trace:
Message from syslogd@cephnode3 at Jan 8 10:59:46 ...
kernel:[153891.373548] Code: 5a fe ff ff 41 57 41 56 41 89 f6 41 55 41
54 55 48 89 d5 53 48 89 fb 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83
7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 0b 01
00 00 48
3891.371931] ------------[ cut here ]------------
[153891.371938] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0x90/0xa3()
[153891.371940] Hardware name: PDSMi
[153891.371941] sysfs: cannot create duplicate filename
'/devices/virtual/block/rbd0'
[153891.371943] Modules linked in: rbd ceph libceph fuse loop tpm_tis
tpm rng_core pcspkr i2c_i801 i2c_core evdev tpm_bios shpchp pci_hotplug
container processor thermal_sys button ext3 jbd mbcache btrfs
zlib_deflate crc32c libcrc32c sd_mod crc_t10dif uhci_hcd ahci libahci
libata ehci_hcd scsi_mod usbcore e1000e usb_common [last unloaded:
scsi_wait_scan]
[153891.371972] Pid: 4077, comm: rbd Not tainted 3.2.0 #5
[153891.371974] Call Trace:
[153891.371978] [<ffffffff81047263>] ? warn_slowpath_common+0x78/0x8c
[153891.371981] [<ffffffff81047316>] ? warn_slowpath_fmt+0x45/0x4a
[153891.371984] [<ffffffff81148270>] ? sysfs_add_one+0x90/0xa3
[153891.371987] [<ffffffff81148a7b>] ? create_dir+0x67/0x9f
[153891.371990] [<ffffffff81148b44>] ? sysfs_create_dir+0x91/0xa5
[153891.371994] [<ffffffff811a0f3e>] ? vsnprintf+0x7e/0x428
[153891.371997] [<ffffffff8119b085>] ? kobject_add_internal+0xc8/0x181
[153891.372000] [<ffffffff8119b2cc>] ? kobject_add+0x66/0x6b
[153891.372003] [<ffffffff810ebdbb>] ? __kmalloc+0xce/0xda
[153891.372006] [<ffffffff8119af0a>] ? kobject_get+0x12/0x17
[153891.372009] [<ffffffff811915ca>] ? get_disk+0x8d/0x8d
[153891.372013] [<ffffffff81233cf7>] ? device_add+0xcf/0x5d0
[153891.372016] [<ffffffff81232e85>] ? dev_set_name+0x3f/0x44
[153891.372019] [<ffffffff811911ad>] ? register_disk+0x37/0x155
[153891.372022] [<ffffffff8119064d>] ? blk_register_region+0x22/0x27
[153891.372024] [<ffffffff8119139a>] ? add_disk+0xcf/0x272
[153891.372029] [<ffffffffa020563f>] ? rbd_add+0x812/0xa9b [rbd]
[153891.372032] [<ffffffff810d14a2>] ? handle_mm_fault+0x107/0x194
[153891.372036] [<ffffffff8114750c>] ? sysfs_write_file+0xd3/0x10f
[153891.372039] [<ffffffff810f2d34>] ? vfs_write+0xa4/0xfe
[153891.372042] [<ffffffff810f2e44>] ? sys_write+0x45/0x6e
[153891.372046] [<ffffffff8132fad2>] ? system_call_fastpath+0x16/0x1b
[153891.372048] ---[ end trace 07aa2735707e0993 ]---
[153891.372051] kobject_add_internal failed for rbd0 with -EEXIST, don't
try to register things with the same name in the same directory.
[153891.372122] Pid: 4077, comm: rbd Tainted: G W 3.2.0 #5
[153891.372123] Call Trace:
[153891.372126] [<ffffffff8119b114>] ? kobject_add_internal+0x157/0x181
[153891.372129] [<ffffffff8119b2cc>] ? kobject_add+0x66/0x6b
[153891.372132] [<ffffffff810ebdbb>] ? __kmalloc+0xce/0xda
[153891.372135] [<ffffffff8119af0a>] ? kobject_get+0x12/0x17
[153891.372137] [<ffffffff811915ca>] ? get_disk+0x8d/0x8d
[153891.372140] [<ffffffff81233cf7>] ? device_add+0xcf/0x5d0
[153891.372143] [<ffffffff81232e85>] ? dev_set_name+0x3f/0x44
[153891.372146] [<ffffffff811911ad>] ? register_disk+0x37/0x155
[153891.372149] [<ffffffff8119064d>] ? blk_register_region+0x22/0x27
[153891.372151] [<ffffffff8119139a>] ? add_disk+0xcf/0x272
[153891.372164] [<ffffffffa020563f>] ? rbd_add+0x812/0xa9b [rbd]
[153891.372167] [<ffffffff810d14a2>] ? handle_mm_fault+0x107/0x194
[153891.372170] [<ffffffff8114750c>] ? sysfs_write_file+0xd3/0x10f
[153891.372173] [<ffffffff810f2d34>] ? vfs_write+0xa4/0xfe
[153891.372176] [<ffffffff810f2e44>] ? sys_write+0x45/0x6e
[153891.372180] [<ffffffff8132fad2>] ? system_call_fastpath+0x16/0x1b
[153891.372190] ------------[ cut here ]------------
[153891.372215] kernel BUG at fs/sysfs/group.c:65!
[153891.372241] invalid opcode: 0000 [#1] SMP
[153891.372269] CPU 2
[153891.372275] Modules linked in: rbd ceph libceph fuse loop tpm_tis
tpm rng_core pcspkr i2c_i801 i2c_core evdev tpm_bios shpchp pci_hotplug
container processor thermal_sys button ext3 jbd mbcache btrfs
zlib_deflate crc32c libcrc32c sd_mod crc_t10dif uhci_hcd ahci libahci
libata ehci_hcd scsi_mod usbcore e1000e usb_common [last unloaded:
scsi_wait_scan]
[153891.372505]
[153891.372525] Pid: 4077, comm: rbd Tainted: G W 3.2.0 #5
Supermicro PDSMi/PDSMi+
[153891.372577] RIP: 0010:[<ffffffff81149d75>] [<ffffffff81149d75>]
internal_create_group+0x27/0x160
[153891.372629] RSP: 0018:ffff8801d265bd28 EFLAGS: 00010246
[153891.372655] RAX: 00000000ffffffef RBX: ffff8801d18b8478 RCX:
0000000000000000
[153891.372699] RDX: ffffffff81624440 RSI: 0000000000000000 RDI:
ffff8801d18b8478
[153891.372742] RBP: ffffffff81624440 R08: ffff880217002300 R09:
ffffffff812341d7
[153891.372785] R10: 0000000000000000 R11: ffff8802056cb2c0 R12:
ffff8801d18b8468
[153891.372829] R13: ffff8801d18b8400 R14: 0000000000000000 R15:
ffff8802056cb2c0
[153891.372873] FS: 00007face11ba760(0000) GS:ffff88021fd00000(0000)
knlGS:0000000000000000
[153891.372918] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[153891.372946] CR2: 000000000055c290 CR3: 00000001d2870000 CR4:
00000000000006e0
[153891.372989] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[153891.373032] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[153891.373076] Process rbd (pid: 4077, threadinfo ffff8801d265a000,
task ffff8801d0faca40)
[153891.373120] Stack:
[153891.373140] 0000000000000010 ffff8801d265bd88 ffff8801d265bd48
00000000e4add280
[153891.373190] ffff8802056cb3f8 ffff8801d18b8400 ffff8802056cb2c0
ffff8801d18b8468
[153891.373240] ffff8801d18b8400 ffff8801d18b8400 ffff8802056cb2c0
ffffffff8118c4b2
[153891.373291] Call Trace:
[153891.373315] [<ffffffff8118c4b2>] ? blk_register_queue+0x45/0xeb
[153891.373343] [<ffffffff811913a2>] ? add_disk+0xd7/0x272
[153891.373371] [<ffffffffa020563f>] ? rbd_add+0x812/0xa9b [rbd]
[153891.373399] [<ffffffff810d14a2>] ? handle_mm_fault+0x107/0x194
[153891.373428] [<ffffffff8114750c>] ? sysfs_write_file+0xd3/0x10f
[153891.373456] [<ffffffff810f2d34>] ? vfs_write+0xa4/0xfe
[153891.373483] [<ffffffff810f2e44>] ? sys_write+0x45/0x6e
[153891.373520] [<ffffffff8132fad2>] ? system_call_fastpath+0x16/0x1b
[153891.373548] Code: 5a fe ff ff 41 57 41 56 41 89 f6 41 55 41 54 55 48
89 d5 53 48 89 fb 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00
75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 0b 01 00 00 48
[153891.373734] RIP [<ffffffff81149d75>] internal_create_group+0x27/0x160
[153891.373765] RSP <ffff8801d265bd28>
[153891.374010] ---[ end trace 07aa2735707e0994 ]---
I know that my mistake is, that i didn't unmount the rbd0 device. Should
it be possible to use unmap if a mountpoint to this device exists ? I my
opinion i should get something like "can not unmap mounted device" error
message.
Maybe someone can explain that ....
Thank you
Jens
next reply other threads:[~2012-01-08 10:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-08 10:06 Jens Rehpoehler [this message]
2012-01-09 19:27 ` small bug ? Josh Durgin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F096A9B.4020207@filoo.de \
--to=jens.rehpoehler@filoo.de \
--cc=ceph-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.