From: Stephen Warren <swarren@nvidia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Date: Tue, 10 Jan 2012 10:56:55 -0700 [thread overview]
Message-ID: <4F0C7BE7.9060201@nvidia.com> (raw)
In-Reply-To: <1324927987-13100-8-git-send-email-sjg@chromium.org>
On 12/26/2011 12:33 PM, Simon Glass wrote:
> From: Jimmy Zhang <jimmzhang@nvidia.com>
>
> Power supplies must be adjusted in line with clock frequency. This code
> provides a simple routine to set the voltage to allow operation at maximum
> frequency.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
> arch/arm/cpu/armv7/tegra2/Makefile | 1 +
> arch/arm/cpu/armv7/tegra2/pmu.c | 355 ++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra2/pmu.h | 63 ++++++
> 3 files changed, 419 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/pmu.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/pmu.h
This driver appears to be for an I2C-based device, so I assume it'd for
a particular PMIC not Tegra's PMC HW module. I imagine this is a driver
for the TI TPS6586X, right?
As such, naming this "pmu" and putting it into the Tegra directory
doesn't make sense. There should be a generic TPS6586X driver, and
possibly a separate file and patch to implement the use of that chip in
conjunction with Tegra.
--
nvpublic
next prev parent reply other threads:[~2012-01-10 17:56 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-26 19:32 [U-Boot] [PATCH 0/14] tegra: warmboot (suspend / resume) support Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 01/14] Add AES crypto library Simon Glass
2012-01-08 5:49 ` Mike Frysinger
2012-01-08 8:57 ` Marek Vasut
2012-01-08 9:09 ` Mike Frysinger
2012-01-08 10:40 ` Marek Vasut
2012-01-08 16:35 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 02/14] tegra: Move ap20.h header into arch location Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code Simon Glass
2012-01-08 5:51 ` Mike Frysinger
2012-01-08 16:42 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 04/14] tegra: Add flow, gp_padctl, fuse, sdram headers Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU Simon Glass
2012-01-09 23:24 ` Stephen Warren
2012-01-12 19:35 ` Simon Glass
2012-01-12 19:48 ` Stephen Warren
2012-01-13 21:06 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings Simon Glass
2012-01-09 23:38 ` Stephen Warren
2012-01-12 20:43 ` Simon Glass
2012-01-13 17:47 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies Simon Glass
2012-01-10 17:56 ` Stephen Warren [this message]
2012-01-12 23:17 ` Simon Glass
2012-01-12 23:43 ` Stephen Warren
2012-01-12 23:55 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards Simon Glass
2012-01-10 18:02 ` Stephen Warren
2012-01-12 23:42 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation Simon Glass
2012-01-10 18:30 ` Stephen Warren
2012-01-13 19:34 ` Simon Glass
2012-01-13 22:04 ` Yen Lin
2012-01-13 23:05 ` Simon Glass
2012-01-13 23:08 ` Stephen Warren
2012-01-14 0:04 ` Yen Lin
2011-12-26 19:33 ` [U-Boot] [PATCH 10/14] tegra: Setup PMC scratch info from ap20 setup Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 11/14] tegra: Set up warmboot code on Nvidia boards Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high Simon Glass
2012-01-10 18:40 ` Stephen Warren
2012-01-13 17:55 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony Simon Glass
2012-01-10 18:46 ` Stephen Warren
2012-01-12 23:05 ` Simon Glass
2012-01-12 23:42 ` Stephen Warren
2012-01-12 23:54 ` Simon Glass
2012-01-13 0:01 ` Stephen Warren
2012-01-13 0:05 ` Simon Glass
2012-01-13 0:10 ` Stephen Warren
2012-01-13 0:18 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 14/14] tegra: Enable LP0 on Seaboard Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0C7BE7.9060201@nvidia.com \
--to=swarren@nvidia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.