From: "Frank Schäfer" <fschaefer.oss@googlemail.com>
To: linux-mmc@vger.kernel.org
Subject: kernel oops during boot process
Date: Sat, 21 Jan 2012 17:45:23 +0100 [thread overview]
Message-ID: <4F1AEBA3.4040300@googlemail.com> (raw)
Hi,
I get the following kernel-oops during boot process:
[ 11.754604] sdhci-pci 0000:06:09.4: SDHCI controller found
[104c:8034] (rev 0)
[ 11.754622] sdhci-pci 0000:06:09.4: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 11.754661] _regulator_get: 0000:06:09.4 supply vmmc not found, using
dummy regulator
[ 11.754740] Registered led device: mmc0::
[ 11.755782] mmc0: SDHCI controller on PCI [0000:06:09.4] using PIO
[ 11.755804] _regulator_get: 0000:06:09.4 supply vmmc not found, using
dummy regulator
[ 11.755812] ------------[ cut here ]------------
[ 11.755820] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0x8a/0xb0()
[ 11.755823] Hardware name: AMILO Pro V2065
[ 11.755825] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:1e.0/0000:06:09.4/microamps_requested_0000:06:09.4-vmmc'
[ 11.755828] Modules linked in: firewire_ohci(+) firewire_core
iTCO_wdt tifm_7xx1(+) sdhci_pci(+) sdhci yenta_socket pcmcia_rsrc sr_mod
parport_pc soundcore rfkill sg iTCO_vendor_support cdrom parport joydev
mmc_core serio_raw pcspkr button ac pcmcia_core tifm_core video lm90
r8169 i2c_i801 crc_itu_t lib80211 snd_page_alloc battery ext4 jbd2 crc16
usbhid hid uhci_hcd ehci_hcd radeon ttm drm_kms_helper drm i2c_algo_bit
rtc_cmos i2c_core intel_agp intel_gtt usbcore usb_common sd_mod fan
processor ata_generic ata_piix ahci libahci libata scsi_mod thermal
thermal_sys hwmon
[ 11.755878] Pid: 514, comm: modprobe Not tainted 3.2.0-0.1-default+ #5
[ 11.755881] Call Trace:
[ 11.755887] [<c0245a7d>] warn_slowpath_common+0x6d/0xa0
[ 11.755891] [<c03648da>] ? sysfs_add_one+0x8a/0xb0
[ 11.755894] [<c03648da>] ? sysfs_add_one+0x8a/0xb0
[ 11.755898] [<c0245b2e>] warn_slowpath_fmt+0x2e/0x30
[ 11.755901] [<c03648da>] sysfs_add_one+0x8a/0xb0
[ 11.755905] [<c0363a4e>] sysfs_add_file_mode+0x7e/0xb0
[ 11.755909] [<c0363a93>] sysfs_add_file+0x13/0x20
[ 11.755913] [<c0363b4c>] sysfs_create_file+0x1c/0x20
[ 11.755918] [<c0494633>] device_create_file+0x13/0x20
[ 11.755923] [<c0466d68>] create_regulator+0xc8/0x320
[ 11.755928] [<c0290063>] ? queue_stop_cpus_work+0x43/0xa0
[ 11.755932] [<c0467096>] _regulator_get+0xd6/0x230
[ 11.755938] [<c029e6ff>] ? request_threaded_irq+0xbf/0x120
[ 11.755942] [<c046720a>] regulator_get+0xa/0x10
[ 11.755949] [<f9629907>] sdhci_add_host+0x5d7/0xc60 [sdhci]
[ 11.755956] [<f96341d0>] sdhci_pci_probe+0x363/0x49a [sdhci_pci]
[ 11.755962] [<c0411d52>] local_pci_probe+0x42/0xb0
[ 11.755966] [<c0412bd0>] pci_device_probe+0x60/0x80
[ 11.755970] [<c0497413>] driver_probe_device+0x83/0x2d0
[ 11.755974] [<c04976d9>] __driver_attach+0x79/0x80
[ 11.755977] [<c0496553>] bus_for_each_dev+0x43/0x70
[ 11.755981] [<c0413010>] ? store_new_id+0x100/0x100
[ 11.755985] [<c04970c9>] driver_attach+0x19/0x20
[ 11.755988] [<c0497660>] ? driver_probe_device+0x2d0/0x2d0
[ 11.755992] [<c0496d25>] bus_add_driver+0x135/0x270
[ 11.756014] [<c0413010>] ? store_new_id+0x100/0x100
[ 11.756018] [<c0497bf5>] driver_register+0x65/0x110
[ 11.756022] [<c0412def>] __pci_register_driver+0x3f/0xb0
[ 11.756027] [<f9637017>] sdhci_drv_init+0x17/0x19 [sdhci_pci]
[ 11.756031] [<c0201210>] do_one_initcall+0x30/0x170
[ 11.756036] [<f9637000>] ? 0xf9636fff
[ 11.756041] [<c027bd7f>] sys_init_module+0xef/0x19b0
[ 11.756048] [<c05d6ed8>] sysenter_do_call+0x12/0x28
[ 11.756051] ---[ end trace b75d0c663d9ce945 ]---
[ 11.756054] create_regulator: dummy: could not add regulator_dev
requested microamps sysfs entry
[ 11.756057] mmc1: no vmmc regulator found
[ 11.756091] Registered led device: mmc1::
[ 11.757561] mmc1: SDHCI controller on PCI [0000:06:09.4] using PIO
[ 11.757585] _regulator_get: 0000:06:09.4 supply vmmc not found, using
dummy regulator
[ 11.757592] ------------[ cut here ]------------
[ 11.757596] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0x8a/0xb0()
[ 11.757598] Hardware name: AMILO Pro V2065
[ 11.757601] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:1e.0/0000:06:09.4/microamps_requested_0000:06:09.4-vmmc'
[ 11.757604] Modules linked in: firewire_ohci(+) firewire_core
iTCO_wdt tifm_7xx1(+) sdhci_pci(+) sdhci yenta_socket pcmcia_rsrc sr_mod
parport_pc soundcore rfkill sg iTCO_vendor_support cdrom parport joydev
mmc_core serio_raw pcspkr button ac pcmcia_core tifm_core video lm90
r8169 i2c_i801 crc_itu_t lib80211 snd_page_alloc battery ext4 jbd2 crc16
usbhid hid uhci_hcd ehci_hcd radeon ttm drm_kms_helper drm i2c_algo_bit
rtc_cmos i2c_core intel_agp intel_gtt usbcore usb_common sd_mod fan
processor ata_generic ata_piix ahci libahci libata scsi_mod thermal
thermal_sys hwmon
[ 11.757648] Pid: 514, comm: modprobe Tainted: G W
3.2.0-0.1-default+ #5
[ 11.757651] Call Trace:
[ 11.757654] [<c0245a7d>] warn_slowpath_common+0x6d/0xa0
[ 11.757658] [<c03648da>] ? sysfs_add_one+0x8a/0xb0
[ 11.757662] [<c03648da>] ? sysfs_add_one+0x8a/0xb0
[ 11.757666] [<c0245b2e>] warn_slowpath_fmt+0x2e/0x30
[ 11.757669] [<c03648da>] sysfs_add_one+0x8a/0xb0
[ 11.757673] [<c0363a4e>] sysfs_add_file_mode+0x7e/0xb0
[ 11.757677] [<c0363a93>] sysfs_add_file+0x13/0x20
[ 11.757680] [<c0363b4c>] sysfs_create_file+0x1c/0x20
[ 11.757684] [<c0494633>] device_create_file+0x13/0x20
[ 11.757688] [<c0466d68>] create_regulator+0xc8/0x320
[ 11.757692] [<c0290063>] ? queue_stop_cpus_work+0x43/0xa0
[ 11.757696] [<c0467096>] _regulator_get+0xd6/0x230
[ 11.757701] [<c029e6ff>] ? request_threaded_irq+0xbf/0x120
[ 11.757705] [<c046720a>] regulator_get+0xa/0x10
[ 11.757710] [<f9629907>] sdhci_add_host+0x5d7/0xc60 [sdhci]
[ 11.757716] [<f96341d0>] sdhci_pci_probe+0x363/0x49a [sdhci_pci]
[ 11.757720] [<c0411d52>] local_pci_probe+0x42/0xb0
[ 11.757724] [<c0412bd0>] pci_device_probe+0x60/0x80
[ 11.757728] [<c0497413>] driver_probe_device+0x83/0x2d0
[ 11.757732] [<c04976d9>] __driver_attach+0x79/0x80
[ 11.757736] [<c0496553>] bus_for_each_dev+0x43/0x70
[ 11.757739] [<c0413010>] ? store_new_id+0x100/0x100
[ 11.757743] [<c04970c9>] driver_attach+0x19/0x20
[ 11.757746] [<c0497660>] ? driver_probe_device+0x2d0/0x2d0
[ 11.757750] [<c0496d25>] bus_add_driver+0x135/0x270
[ 11.757754] [<c0413010>] ? store_new_id+0x100/0x100
[ 11.757758] [<c0497bf5>] driver_register+0x65/0x110
[ 11.757762] [<c0412def>] __pci_register_driver+0x3f/0xb0
[ 11.757767] [<f9637017>] sdhci_drv_init+0x17/0x19 [sdhci_pci]
[ 11.757771] [<c0201210>] do_one_initcall+0x30/0x170
[ 11.757775] [<f9637000>] ? 0xf9636fff
[ 11.757779] [<c027bd7f>] sys_init_module+0xef/0x19b0
[ 11.757784] [<c05d6ed8>] sysenter_do_call+0x12/0x28
[ 11.757787] ---[ end trace b75d0c663d9ce946 ]---
[ 11.757790] create_regulator: dummy: could not add regulator_dev
requested microamps sysfs entry
[ 11.757792] mmc2: no vmmc regulator found
[ 11.757826] Registered led device: mmc2::
[ 11.759037] mmc2: SDHCI controller on PCI [0000:06:09.4] using PIO
Looks like it comes from the SDHCI controller ? Any idea what might be
wrong ?
I get the same oops with kernel 2.6.34, so this seems to be a long
existing issue.
Regards,
Frank
next reply other threads:[~2012-01-21 16:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-21 16:45 Frank Schäfer [this message]
2012-01-23 7:29 ` kernel oops during boot process Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1AEBA3.4040300@googlemail.com \
--to=fschaefer.oss@googlemail.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.