All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Hartmann <andihartmann@01019freenet.de>
To: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: ath9k get's completely knocked out by rt3572 device
Date: Wed, 25 Jan 2012 09:15:05 +0100	[thread overview]
Message-ID: <4F1FBA09.3000003@01019freenet.de> (raw)
In-Reply-To: <13411135.eH6opTgxBo@helmutmobil.site>

Hello Helmut,

I repeated the test with some more systematic to get a chance to get a
deeper view on what is going on.

The test was done using netperf with the following two calls:

netperf -t TCP_MAERTS -H host -l 60
netperf -t TCP_STREAM -H host -l 60


The test is done with two different notebooks as STA:

notebook ath9k:
built-in ar9285 device, intel core i5 processor, linux 3.2.1 / 64 bit
kernel.

notebook rt3572:
WUSB600Nv2 WLAN USB stick (inserted horizontally into the USB port of
the back of the notebook), intel celeron M processor, linux 2.6.37.6 /
32 bit kernel, Ralink rt5572sta.


AP:
rt2860 based pci device (Linksys WMP600N) with compat-wireless-3.3-rc1-2
with all recent patches incl. "mac80211: revert: retry sending failed
BAR frames later instead of tearing down aggr" with linux 3.1.4 / 64 bit
smp.



The network parameters are:
2,4 GHz, 40 MHz, WPA2 EAP-TLS, CCMP



The following chart should be read like this:

- one measurement / line: the device operates alone
- two measurements / line: both devices run exactly (+/- few ms) at the
  same time
- one direction of the data stream / line: both devices operate at the
  same direction
- two directions of the data stream / line: each device operates at the
  direction next to it


			10^6bits/s	10^6bits/s
			ath9k		rt3572
			desk		chair

TCP_STREAM STA -> AP	57.10		
TCP_STREAM STA -> AP			55.22

TCP_STREAM STA -> AP	 2.52		49.97
TCP_STREAM STA -> AP	 2.84		49.94
TCP_STREAM STA -> AP	 3.82		47.09
TCP_STREAM STA -> AP	 4.27		47.57
TCP_STREAM STA -> AP	 2.28		48.89


TCP_MAERTS AP -> STA			65.39
TCP_MAERTS AP -> STA	91.65

TCP_MAERTS AP -> STA	14.06		51.07
TCP_MAERTS AP -> STA	 6.55		59.78
TCP_MAERTS AP -> STA	18.87		49.62
TCP_MAERTS AP -> STA	10.73		56.63

TCP_MAERTS AP -> STA	30.28		35.33	TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA	31.65		32.83	TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA	32.05		34.23	TCP_STREAM STA -> AP

TCP_STREAM AP -> STA	 0.12		66.23	TCP_MAERTS STA -> AP
TCP_STREAM AP -> STA	 0.10		69.89	TCP_MAERTS STA -> AP

----------------------------------------------------------------------

The position of the notebooks was changed:

			ath9k		rt3572
			chair		desk

TCP_STREAM STA -> AP	29.27		
TCP_STREAM STA -> AP			55.79

TCP_STREAM STA -> AP	interrupted	56.32
			system call
TCP_STREAM STA -> AP	interrupted	55.65
			system call

TCP_MAERTS AP -> STA			80.73
TCP_MAERTS AP -> STA	79.15
TCP_MAERTS AP -> STA	17.13		62.02
TCP_MAERTS AP -> STA	15.14		63.92
TCP_MAERTS AP -> STA	12.53		66.41
TCP_MAERTS AP -> STA	11.95		66.17

TCP_MAERTS AP -> STA	 8.44		50.19	TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA	 9.31		49.67	TCP_STREAM STA -> AP
TCP_MAERTS AP -> STA	11.24		46.72	TCP_STREAM STA -> AP

TCP_STREAM AP -> STA	 0.96		74.82	TCP_MAERTS STA -> AP
TCP_STREAM AP -> STA	 0.01		80.22	TCP_MAERTS STA -> AP



I'll try to repeat the complete test with another AP.


Regards,
Andreas

  parent reply	other threads:[~2012-01-25  8:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-24 18:19 ath9k get's completely knocked out by rt3572 device Andreas Hartmann
2012-01-24 20:07 ` Helmut Schaa
2012-01-24 21:52   ` Andreas Hartmann
2012-01-25  7:53     ` Helmut Schaa
2012-01-25  8:15   ` Andreas Hartmann [this message]
2012-01-25 10:51     ` Andreas Hartmann
2012-01-25 12:23       ` Helmut Schaa
2012-01-25 13:29         ` Andreas Hartmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F1FBA09.3000003@01019freenet.de \
    --to=andihartmann@01019freenet.de \
    --cc=helmut.schaa@googlemail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.