Hauppauge HVR-930C

[Benjamin Larsson <benjamin@southpole.se>]

I tried a daily snapshot (2011-01-24) with this stick. And I'm getting 
these kind of errors in the log:

[43665.769571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43665.769857] drxk: 02 00 00 00 10 00 07 00 03 02                    
..........
[43686.121576] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43686.121861] drxk: 02 00 00 00 10 00 05 00 03 02                    
..........
[43706.465578] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43706.465861] drxk: 02 00 00 00 10 00 05 00 03 02                    
..........
[43709.669571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43709.669850] drxk: 02 00 00 00 10 00 05 00 03 02                    
..........

First I tried the driver with the firmware that is downloaded with the 
get_firmware script. The adapter and frontends was registered properly 
but I did not get any TS from the stick. I then renamed the firmware 
file and the driver complained about missing firmware but stick started 
working anyway. So the drxk in my version of the card has a rom with 
microcode in it.

So things that would be nice to have is:

A log output that the drxk actually loaded the firmware file. Right now 
there is only log output when there is no firmware file detected.
Maybe add a log that the card might work without the drxk firmware.
Silence the SCU_RESULT_INVPAR debug output by default or find out what 
is causing the error messages.

MvH
Benjamin Larsson