From: Antti Palosaari <crope@iki.fi>
To: Claus Olesen <ceolesen@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: 290e locking issue
Date: Thu, 26 Jan 2012 13:58:39 +0200 [thread overview]
Message-ID: <4F213FEF.8030309@iki.fi> (raw)
In-Reply-To: <CAGa-wNNnaJbrLdAGA9cX=wMBwZYtVp8JLseeTGevDJH-tyDpeQ@mail.gmail.com>
On 01/26/2012 01:46 PM, Claus Olesen wrote:
> the dmesg output from inplug of 290e until usb mem stick mount timeout
> with a cut marked "--- cut similar ---" between mount and timeout for
> less output is
I think it is maybe some incapability of em28xx driver. Maybe it could
be something to do with USB HCI too...
Could you test latest drivers using media_build.git ?
>
>> inplug 290e
> [ 112.367345] usb 2-3: new high-speed USB device number 2 using ehci_hcd
> [ 112.482773] usb 2-3: New USB device found, idVendor=2013, idProduct=024f
> [ 112.482783] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 112.482790] usb 2-3: Product: PCTV 290e
> [ 112.482796] usb 2-3: Manufacturer: PCTV Systems
> [ 112.482801] usb 2-3: SerialNumber: 00000006VEJQ
> [ 112.988850] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps
> (2013:024f, interface 0, class 0)
> [ 112.988929] em28xx #0: chip ID is em28174
> [ 113.284694] em28xx #0: Identified as PCTV nanoStick T2 290e (card=78)
> [ 113.340323] Registered IR keymap rc-pinnacle-pctv-hd
> [ 113.340594] input: em28xx IR (em28xx #0) as
> /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc1/input19
> [ 113.341677] rc1: em28xx IR (em28xx #0) as
> /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc1
> [ 113.342411] em28xx #0: v4l2 driver version 0.1.3
> [ 113.348855] em28xx #0: V4L2 video device registered as video1
> [ 113.350562] usbcore: registered new interface driver em28xx
> [ 113.350568] em28xx driver loaded
> [ 113.480057] tda18271 17-0060: creating new instance
> [ 113.485221] TDA18271HD/C2 detected @ 17-0060
> [ 113.724218] tda18271 17-0060: attaching existing instance
> [ 113.724227] DVB: registering new adapter (em28xx #0)
> [ 113.724235] DVB: registering adapter 0 frontend 0 (Sony CXD2820R
> (DVB-T/T2))...
> [ 113.724763] DVB: registering adapter 0 frontend 1 (Sony CXD2820R (DVB-C))...
> [ 113.728614] em28xx #0: Successfully loaded em28xx-dvb
> [ 113.728617] Em28xx: Initialized (Em28xx dvb Extension) extension
>> inplug usb mem stick
> [ 136.177341] usb 2-1: new high-speed USB device number 3 using ehci_hcd
> [ 136.308531] usb 2-1: New USB device found, idVendor=0bda, idProduct=0120
> [ 136.308541] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 136.308548] usb 2-1: Product: USB2.0-CRW
> [ 136.308554] usb 2-1: Manufacturer: Generic
> [ 136.308559] usb 2-1: SerialNumber: 20060413092100000
> [ 136.630379] Initializing USB Mass Storage driver...
> [ 136.630764] scsi6 : usb-storage 2-1:1.0
> [ 136.631270] usbcore: registered new interface driver usb-storage
> [ 136.631275] USB Mass Storage support registered.
> [ 137.636863] scsi 6:0:0:0: Direct-Access Generic- Card Reader
> 1.00 PQ: 0 ANSI: 0 CCS
> [ 137.639519] sd 6:0:0:0: Attached scsi generic sg3 type 0
> [ 138.446467] sd 6:0:0:0: [sdc] 15661056 512-byte logical blocks:
> (8.01 GB/7.46 GiB)
> [ 138.447282] sd 6:0:0:0: [sdc] Write Protect is off
> [ 138.447291] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
> [ 138.448138] sd 6:0:0:0: [sdc] No Caching mode page present
> [ 138.448147] sd 6:0:0:0: [sdc] Assuming drive cache: write through
> [ 138.451639] sd 6:0:0:0: [sdc] No Caching mode page present
> [ 138.451647] sd 6:0:0:0: [sdc] Assuming drive cache: write through
> [ 138.452729] sdc: sdc1
>> mount usb mem stick sdc1
> [ 168.838133] usb 2-1: reset high-speed USB device number 3 using ehci_hcd
[... removed lot of similar USB errors ...]
> driverbyte=DRIVER_SENSE
> [ 478.342504] sd 6:0:0:0: [sdc] Sense Key : Illegal Request [current]
> [ 478.342510] sd 6:0:0:0: [sdc] Add. Sense: Logical block address out of range
> [ 478.342517] sd 6:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 20 00 00 00 01 00
> [ 478.342528] end_request: I/O error, dev sdc, sector 8192
> [ 478.342545] FAT-fs (sdc1): unable to read boot sector
>
>
>
> On Thu, Jan 26, 2012 at 10:07 AM, Antti Palosaari<crope@iki.fi> wrote:
>> On 01/26/2012 12:16 AM, Claus Olesen wrote:
>>>
>>> just got 3.2.1-3.fc16.i686.PAE
>>> the issue that the driver had to be removed for the 290e to work after
>>> a replug is gone.
>>> the issue that a usb mem stick cannot be mounted while the 290e is
>>> plugged in still lingers.
>>> one workaround is to unplug the 290e and wait a little (no need to
>>> also remove the driver).
>>
>>
>> What it prints to the system log? Use tail -f /var/log/messages or dmesg.
>>
>>
>> Antti
>> --
>> http://palosaari.fi/
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-01-26 11:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-25 22:16 290e locking issue Claus Olesen
2012-01-26 9:07 ` Antti Palosaari
2012-01-26 11:46 ` Claus Olesen
2012-01-26 11:58 ` Antti Palosaari [this message]
2012-01-26 15:18 ` Devin Heitmueller
2012-01-26 17:09 ` Claus Olesen
2012-01-26 18:16 ` Antti Palosaari
2012-01-26 19:25 ` Claus Olesen
2012-01-26 19:41 ` Devin Heitmueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F213FEF.8030309@iki.fi \
--to=crope@iki.fi \
--cc=ceolesen@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.