From: Jack Mitchell <ml@communistcode.co.uk>
To: yocto@yoctoproject.org
Subject: Re: BeagleBone with meta-ti layer
Date: Thu, 26 Jan 2012 13:50:32 +0000 [thread overview]
Message-ID: <4F215A28.4030409@communistcode.co.uk> (raw)
In-Reply-To: <4F2154AA.5040103@mlbassoc.com>
On 26/01/12 13:27, Gary Thomas wrote:
> On 2012-01-26 05:35, Gary Thomas wrote:
>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>>
>>>>> Hello everyone,
>>>>>
>>>>> I will soon be receiving a Beaglebone and I wish to transfer the
>>>>> work I have been doing with Yocto on the Beagleboard over to the
>>>>> Beaglebone, to show my company how the same
>>>>> application codebase can be run different platforms using
>>>>> Linux/Yocto/etc..
>>>>>
>>>>> I have been looking at the meta-ti layer and trying to figure out
>>>>> how it works and how I will integrate it into the yocto build
>>>>> environment, but I thought I would just throw a
>>>>> query out to see if anybody is doing this and if there are any
>>>>> pitfalls I should avoid.
>>>> There's a README in the meta-ti layer, follow the instructions in
>>>> there.
>>>
>>> Hi Koen,
>>>
>>> I understand that there is a readme in the meta-ti layer however
>>> this refers specifically to using Angstrom and associated layers,
>>> where as I want to build specifically for yocto.
>>> So I was looking for pointers for abstracting the meta-ti layer form
>>> angstrom over to Yocto.
>>
>> I gave this a try, just adding the meta-ti layer into my stack.
>> Sadly, it blew up right away with this error:
>>
>> ERROR: Failure expanding variable FILESPATH, expression was
>> ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-ke
>>
> rn
>>
>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/
>>
> re
>>
>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/re
>>
> ci
>>
>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>
>> "", d)}${@base_set_filespath([
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which
>> triggered exception SyntaxError: EOL while scanning
>> string literal (FILESPATH, line 1)
>> ERROR: Command execution failed: Exited with 1
>>
>> I'm not sure what this means or how to diagnose what's wrong.
>
> I worked past this. I turns out that my <DISTRO>.conf file had
> this line in it (needed by some of the OLD meta-texasinstruments
> recipes):
> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
> I took out the FEED_ARCH and now I'm getting farther.
>
> Next hurdle:
> Could not include required file
> recipes-images/angstrom/systemd-image.bb
>
>>
>> n.b. I have done the same thing successfully before with the
>> Angstrom meta-texasinstruments layer (which I know has been
>> deprecated and replaced by meta-ti), so I know the process can
>> work.
>>
>
From a clean poky edison build directory with machine_beagleboard
selected and the meta-ti layer enabled last in my bblayers conf I
receive this error:
ERROR: Could not inherit file classes/systemd.bbclass
However I cannot find where this is being called from in the meta-ti
layer.. it seems very similar to what Gary has run into...
next prev parent reply other threads:[~2012-01-26 13:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-26 11:06 BeagleBone with meta-ti layer Jack Mitchell
2012-01-26 12:00 ` Koen Kooi
2012-01-26 12:01 ` Jack Mitchell
2012-01-26 12:35 ` Gary Thomas
2012-01-26 13:27 ` Gary Thomas
2012-01-26 13:50 ` Jack Mitchell [this message]
2012-01-26 14:06 ` Gary Thomas
2012-01-26 15:07 ` Gary Thomas
2012-01-26 15:24 ` Gary Thomas
2012-01-26 15:28 ` Jack Mitchell
2012-01-26 15:38 ` Brian Hutchinson
2012-02-20 6:39 ` Andrea Galbusera
2012-02-20 9:29 ` Jack Mitchell
2012-02-21 16:28 ` Andrea Galbusera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F215A28.4030409@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.