* BeagleBone with meta-ti layer
@ 2012-01-26 11:06 Jack Mitchell
2012-01-26 12:00 ` Koen Kooi
0 siblings, 1 reply; 14+ messages in thread
From: Jack Mitchell @ 2012-01-26 11:06 UTC (permalink / raw)
To: yocto@yoctoproject.org
Hello everyone,
I will soon be receiving a Beaglebone and I wish to transfer the work I
have been doing with Yocto on the Beagleboard over to the Beaglebone, to
show my company how the same application codebase can be run different
platforms using Linux/Yocto/etc..
I have been looking at the meta-ti layer and trying to figure out how it
works and how I will integrate it into the yocto build environment, but
I thought I would just throw a query out to see if anybody is doing this
and if there are any pitfalls I should avoid.
It would also be nice to transfer the beagleboard onto the meta-ti
config as is it manufacturer supported, is anyone doing this?
Cheers,
Jack.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 11:06 BeagleBone with meta-ti layer Jack Mitchell
@ 2012-01-26 12:00 ` Koen Kooi
2012-01-26 12:01 ` Jack Mitchell
0 siblings, 1 reply; 14+ messages in thread
From: Koen Kooi @ 2012-01-26 12:00 UTC (permalink / raw)
To: Jack Mitchell; +Cc: yocto@yoctoproject.org
Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
> Hello everyone,
>
> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same application codebase can be run different platforms using Linux/Yocto/etc..
>
> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a query out to see if anybody is doing this and if there are any pitfalls I should avoid.
There's a README in the meta-ti layer, follow the instructions in there.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 12:00 ` Koen Kooi
@ 2012-01-26 12:01 ` Jack Mitchell
2012-01-26 12:35 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Jack Mitchell @ 2012-01-26 12:01 UTC (permalink / raw)
To: yocto@yoctoproject.org
On 26/01/12 12:00, Koen Kooi wrote:
> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>
>> Hello everyone,
>>
>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same application codebase can be run different platforms using Linux/Yocto/etc..
>>
>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a query out to see if anybody is doing this and if there are any pitfalls I should avoid.
> There's a README in the meta-ti layer, follow the instructions in there.
Hi Koen,
I understand that there is a readme in the meta-ti layer however this
refers specifically to using Angstrom and associated layers, where as I
want to build specifically for yocto. So I was looking for pointers for
abstracting the meta-ti layer form angstrom over to Yocto.
Regards,
Jack.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 12:01 ` Jack Mitchell
@ 2012-01-26 12:35 ` Gary Thomas
2012-01-26 13:27 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2012-01-26 12:35 UTC (permalink / raw)
To: yocto
On 2012-01-26 05:01, Jack Mitchell wrote:
> On 26/01/12 12:00, Koen Kooi wrote:
>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>
>>> Hello everyone,
>>>
>>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same
>>> application codebase can be run different platforms using Linux/Yocto/etc..
>>>
>>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a
>>> query out to see if anybody is doing this and if there are any pitfalls I should avoid.
>> There's a README in the meta-ti layer, follow the instructions in there.
>
> Hi Koen,
>
> I understand that there is a readme in the meta-ti layer however this refers specifically to using Angstrom and associated layers, where as I want to build specifically for yocto.
> So I was looking for pointers for abstracting the meta-ti layer form angstrom over to Yocto.
I gave this a try, just adding the meta-ti layer into my stack.
Sadly, it blew up right away with this error:
ERROR: Failure expanding variable FILESPATH, expression was ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
"/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kern
el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/re
cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/reci
pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
"", d)}${@base_set_filespath([ "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
"/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
"/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
"/home/local/poky-multi/meta-ti/recipes-kernel/linux/files", "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which triggered exception SyntaxError: EOL while scanning
string literal (FILESPATH, line 1)
ERROR: Command execution failed: Exited with 1
I'm not sure what this means or how to diagnose what's wrong.
n.b. I have done the same thing successfully before with the
Angstrom meta-texasinstruments layer (which I know has been
deprecated and replaced by meta-ti), so I know the process can
work.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 12:35 ` Gary Thomas
@ 2012-01-26 13:27 ` Gary Thomas
2012-01-26 13:50 ` Jack Mitchell
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2012-01-26 13:27 UTC (permalink / raw)
To: yocto
On 2012-01-26 05:35, Gary Thomas wrote:
> On 2012-01-26 05:01, Jack Mitchell wrote:
>> On 26/01/12 12:00, Koen Kooi wrote:
>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>
>>>> Hello everyone,
>>>>
>>>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same
>>>> application codebase can be run different platforms using Linux/Yocto/etc..
>>>>
>>>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a
>>>> query out to see if anybody is doing this and if there are any pitfalls I should avoid.
>>> There's a README in the meta-ti layer, follow the instructions in there.
>>
>> Hi Koen,
>>
>> I understand that there is a readme in the meta-ti layer however this refers specifically to using Angstrom and associated layers, where as I want to build specifically for yocto.
>> So I was looking for pointers for abstracting the meta-ti layer form angstrom over to Yocto.
>
> I gave this a try, just adding the meta-ti layer into my stack.
> Sadly, it blew up right away with this error:
>
> ERROR: Failure expanding variable FILESPATH, expression was ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-ke
rn
>
> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/
re
>
> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/re
ci
>
> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
> "", d)}${@base_set_filespath([ "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files", "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which triggered exception SyntaxError: EOL while scanning
> string literal (FILESPATH, line 1)
> ERROR: Command execution failed: Exited with 1
>
> I'm not sure what this means or how to diagnose what's wrong.
I worked past this. I turns out that my <DISTRO>.conf file had
this line in it (needed by some of the OLD meta-texasinstruments
recipes):
OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
I took out the FEED_ARCH and now I'm getting farther.
Next hurdle:
Could not include required file recipes-images/angstrom/systemd-image.bb
>
> n.b. I have done the same thing successfully before with the
> Angstrom meta-texasinstruments layer (which I know has been
> deprecated and replaced by meta-ti), so I know the process can
> work.
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 13:27 ` Gary Thomas
@ 2012-01-26 13:50 ` Jack Mitchell
2012-01-26 14:06 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Jack Mitchell @ 2012-01-26 13:50 UTC (permalink / raw)
To: yocto
On 26/01/12 13:27, Gary Thomas wrote:
> On 2012-01-26 05:35, Gary Thomas wrote:
>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>>
>>>>> Hello everyone,
>>>>>
>>>>> I will soon be receiving a Beaglebone and I wish to transfer the
>>>>> work I have been doing with Yocto on the Beagleboard over to the
>>>>> Beaglebone, to show my company how the same
>>>>> application codebase can be run different platforms using
>>>>> Linux/Yocto/etc..
>>>>>
>>>>> I have been looking at the meta-ti layer and trying to figure out
>>>>> how it works and how I will integrate it into the yocto build
>>>>> environment, but I thought I would just throw a
>>>>> query out to see if anybody is doing this and if there are any
>>>>> pitfalls I should avoid.
>>>> There's a README in the meta-ti layer, follow the instructions in
>>>> there.
>>>
>>> Hi Koen,
>>>
>>> I understand that there is a readme in the meta-ti layer however
>>> this refers specifically to using Angstrom and associated layers,
>>> where as I want to build specifically for yocto.
>>> So I was looking for pointers for abstracting the meta-ti layer form
>>> angstrom over to Yocto.
>>
>> I gave this a try, just adding the meta-ti layer into my stack.
>> Sadly, it blew up right away with this error:
>>
>> ERROR: Failure expanding variable FILESPATH, expression was
>> ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-ke
>>
> rn
>>
>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/
>>
> re
>>
>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/re
>>
> ci
>>
>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>
>> "", d)}${@base_set_filespath([
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files",
>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which
>> triggered exception SyntaxError: EOL while scanning
>> string literal (FILESPATH, line 1)
>> ERROR: Command execution failed: Exited with 1
>>
>> I'm not sure what this means or how to diagnose what's wrong.
>
> I worked past this. I turns out that my <DISTRO>.conf file had
> this line in it (needed by some of the OLD meta-texasinstruments
> recipes):
> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
> I took out the FEED_ARCH and now I'm getting farther.
>
> Next hurdle:
> Could not include required file
> recipes-images/angstrom/systemd-image.bb
>
>>
>> n.b. I have done the same thing successfully before with the
>> Angstrom meta-texasinstruments layer (which I know has been
>> deprecated and replaced by meta-ti), so I know the process can
>> work.
>>
>
From a clean poky edison build directory with machine_beagleboard
selected and the meta-ti layer enabled last in my bblayers conf I
receive this error:
ERROR: Could not inherit file classes/systemd.bbclass
However I cannot find where this is being called from in the meta-ti
layer.. it seems very similar to what Gary has run into...
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 13:50 ` Jack Mitchell
@ 2012-01-26 14:06 ` Gary Thomas
2012-01-26 15:07 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2012-01-26 14:06 UTC (permalink / raw)
To: yocto
On 2012-01-26 06:50, Jack Mitchell wrote:
> On 26/01/12 13:27, Gary Thomas wrote:
>> On 2012-01-26 05:35, Gary Thomas wrote:
>>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>>>
>>>>>> Hello everyone,
>>>>>>
>>>>>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same
>>>>>> application codebase can be run different platforms using Linux/Yocto/etc..
>>>>>>
>>>>>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a
>>>>>> query out to see if anybody is doing this and if there are any pitfalls I should avoid.
>>>>> There's a README in the meta-ti layer, follow the instructions in there.
>>>>
>>>> Hi Koen,
>>>>
>>>> I understand that there is a readme in the meta-ti layer however this refers specifically to using Angstrom and associated layers, where as I want to build specifically for yocto.
>>>> So I was looking for pointers for abstracting the meta-ti layer form angstrom over to Yocto.
>>>
>>> I gave this a try, just adding the meta-ti layer into my stack.
>>> Sadly, it blew up right away with this error:
>>>
>>> ERROR: Failure expanding variable FILESPATH, expression was ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-
k
>>>
> e
>>>
>> rn
>>>
>>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-t
i
>>>
> /
>>>
>> re
>>>
>>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/
r
>>>
> e
>>>
>> ci
>>>
>>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>>
>>> "", d)}${@base_set_filespath([ "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files", "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which triggered exception SyntaxError: EOL while scanning
>>> string literal (FILESPATH, line 1)
>>> ERROR: Command execution failed: Exited with 1
>>>
>>> I'm not sure what this means or how to diagnose what's wrong.
>>
>> I worked past this. I turns out that my <DISTRO>.conf file had
>> this line in it (needed by some of the OLD meta-texasinstruments
>> recipes):
>> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
>> I took out the FEED_ARCH and now I'm getting farther.
>>
>> Next hurdle:
>> Could not include required file recipes-images/angstrom/systemd-image.bb
>>
>>>
>>> n.b. I have done the same thing successfully before with the
>>> Angstrom meta-texasinstruments layer (which I know has been
>>> deprecated and replaced by meta-ti), so I know the process can
>>> work.
>>>
>>
> From a clean poky edison build directory with machine_beagleboard selected and the meta-ti layer enabled last in my bblayers conf I receive this error:
>
> ERROR: Could not inherit file classes/systemd.bbclass
>
> However I cannot find where this is being called from in the meta-ti layer.. it seems very similar to what Gary has run into...
Try adding this to local.conf
BBMASK = ".*/meta-ti/recipes-misc/"
This will let bitbake skip the troublesome recipes. Since you're
interested in building Yocto, it should be OK.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 14:06 ` Gary Thomas
@ 2012-01-26 15:07 ` Gary Thomas
2012-01-26 15:24 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2012-01-26 15:07 UTC (permalink / raw)
To: yocto
On 2012-01-26 07:06, Gary Thomas wrote:
> On 2012-01-26 06:50, Jack Mitchell wrote:
>> On 26/01/12 13:27, Gary Thomas wrote:
>>> On 2012-01-26 05:35, Gary Thomas wrote:
>>>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>>>>
>>>>>>> Hello everyone,
>>>>>>>
>>>>>>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same
>>>>>>> application codebase can be run different platforms using Linux/Yocto/etc..
>>>>>>>
>>>>>>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a
>>>>>>> query out to see if anybody is doing this and if there are any pitfalls I should avoid.
>>>>>> There's a README in the meta-ti layer, follow the instructions in there.
>>>>>
>>>>> Hi Koen,
>>>>>
>>>>> I understand that there is a readme in the meta-ti layer however this refers specifically to using Angstrom and associated layers, where as I want to build specifically for
>>>>> yocto.
>>>>> So I was looking for pointers for abstracting the meta-ti layer form angstrom over to Yocto.
>>>>
>>>> I gave this a try, just adding the meta-ti layer into my stack.
>>>> Sadly, it blew up right away with this error:
>>>>
>>>> ERROR: Failure expanding variable FILESPATH, expression was ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes
-
>>>>
> k
>>>>
>> e
>>>>
>>> rn
>>>>
>>>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-
t
>>>>
> i
>>>>
>> /
>>>>
>>> re
>>>>
>>>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti
/
>>>>
> r
>>>>
>> e
>>>>
>>> ci
>>>>
>>>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>>>
>>>>
>>>> "", d)}${@base_set_filespath([ "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files", "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which triggered exception SyntaxError: EOL while scanning
>>>> string literal (FILESPATH, line 1)
>>>> ERROR: Command execution failed: Exited with 1
>>>>
>>>> I'm not sure what this means or how to diagnose what's wrong.
>>>
>>> I worked past this. I turns out that my <DISTRO>.conf file had
>>> this line in it (needed by some of the OLD meta-texasinstruments
>>> recipes):
>>> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
>>> I took out the FEED_ARCH and now I'm getting farther.
>>>
>>> Next hurdle:
>>> Could not include required file recipes-images/angstrom/systemd-image.bb
>>>
>>>>
>>>> n.b. I have done the same thing successfully before with the
>>>> Angstrom meta-texasinstruments layer (which I know has been
>>>> deprecated and replaced by meta-ti), so I know the process can
>>>> work.
>>>>
>>>
>> From a clean poky edison build directory with machine_beagleboard selected and the meta-ti layer enabled last in my bblayers conf I receive this error:
>>
>> ERROR: Could not inherit file classes/systemd.bbclass
>>
>> However I cannot find where this is being called from in the meta-ti layer.. it seems very similar to what Gary has run into...
>
> Try adding this to local.conf
> BBMASK = ".*/meta-ti/recipes-misc/"
> This will let bitbake skip the troublesome recipes. Since you're
> interested in building Yocto, it should be OK.
Next, problem: I tried to build for my BeagleBone, but the kernel
build failed with this error:
| arch/arm/boot/compressed/head.S: Assembler messages:
| arch/arm/boot/compressed/head.S:127: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:134: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:136: Error: selected processor does not support requested special purpose register -- `msr cpsr_c,r2'
| make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
| make[2]: *** Waiting for unfinished jobs....
| make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
| make: *** [uImage] Error 2
| ERROR: oe_runmake failed
NOTE: package linux-ti33x-psp-3.1-r0: task do_compile: Failed
ERROR: Task 352 (/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp_3.1.bb, do_compile) failed with exit code '1'
Looks like an incompatibility with the tools
Angstrom = gcc-4.5-r45+svnr181733
Yocto = gcc-cross-4.6.2+svnr181430-r20
Oh well...
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 15:07 ` Gary Thomas
@ 2012-01-26 15:24 ` Gary Thomas
2012-01-26 15:28 ` Jack Mitchell
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2012-01-26 15:24 UTC (permalink / raw)
To: yocto
On 2012-01-26 08:07, Gary Thomas wrote:
> On 2012-01-26 07:06, Gary Thomas wrote:
>> On 2012-01-26 06:50, Jack Mitchell wrote:
>>> On 26/01/12 13:27, Gary Thomas wrote:
>>>> On 2012-01-26 05:35, Gary Thomas wrote:
>>>>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>>>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende geschreven:
>>>>>>>
>>>>>>>> Hello everyone,
>>>>>>>>
>>>>>>>> I will soon be receiving a Beaglebone and I wish to transfer the work I have been doing with Yocto on the Beagleboard over to the Beaglebone, to show my company how the same
>>>>>>>> application codebase can be run different platforms using Linux/Yocto/etc..
>>>>>>>>
>>>>>>>> I have been looking at the meta-ti layer and trying to figure out how it works and how I will integrate it into the yocto build environment, but I thought I would just throw a
>>>>>>>> query out to see if anybody is doing this and if there are any pitfalls I should avoid.
>>>>>>> There's a README in the meta-ti layer, follow the instructions in there.
>>>>>>
>>>>>> Hi Koen,
>>>>>>
>>>>>> I understand that there is a readme in the meta-ti layer however this refers specifically to using Angstrom and associated layers, where as I want to build specifically for
>>>>>> yocto.
>>>>>> So I was looking for pointers for abstracting the meta-ti layer form angstrom over to Yocto.
>>>>>
>>>>> I gave this a try, just adding the meta-ti layer into my stack.
>>>>> Sadly, it blew up right away with this error:
>>>>>
>>>>> ERROR: Failure expanding variable FILESPATH, expression was ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipe
s
>>>>>
> -
>>>>>
>> k
>>>>>
>>> e
>>>>>
>>>> rn
>>>>>
>>>>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta
-
>>>>>
> t
>>>>>
>> i
>>>>>
>>> /
>>>>>
>>>> re
>>>>>
>>>>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-t
i
>>>>>
> /
>>>>>
>> r
>>>>>
>>> e
>>>>>
>>>> ci
>>>>>
>>>>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>>>>
>>>>>
>>>>>
>>>>> "", d)}${@base_set_filespath([ "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1", "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files", "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)} which triggered exception SyntaxError: EOL while
>>>>> scanning
>>>>> string literal (FILESPATH, line 1)
>>>>> ERROR: Command execution failed: Exited with 1
>>>>>
>>>>> I'm not sure what this means or how to diagnose what's wrong.
>>>>
>>>> I worked past this. I turns out that my <DISTRO>.conf file had
>>>> this line in it (needed by some of the OLD meta-texasinstruments
>>>> recipes):
>>>> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
>>>> I took out the FEED_ARCH and now I'm getting farther.
>>>>
>>>> Next hurdle:
>>>> Could not include required file recipes-images/angstrom/systemd-image.bb
>>>>
>>>>>
>>>>> n.b. I have done the same thing successfully before with the
>>>>> Angstrom meta-texasinstruments layer (which I know has been
>>>>> deprecated and replaced by meta-ti), so I know the process can
>>>>> work.
>>>>>
>>>>
>>> From a clean poky edison build directory with machine_beagleboard selected and the meta-ti layer enabled last in my bblayers conf I receive this error:
>>>
>>> ERROR: Could not inherit file classes/systemd.bbclass
>>>
>>> However I cannot find where this is being called from in the meta-ti layer.. it seems very similar to what Gary has run into...
>>
>> Try adding this to local.conf
>> BBMASK = ".*/meta-ti/recipes-misc/"
>> This will let bitbake skip the troublesome recipes. Since you're
>> interested in building Yocto, it should be OK.
>
> Next, problem: I tried to build for my BeagleBone, but the kernel
> build failed with this error:
> | arch/arm/boot/compressed/head.S: Assembler messages:
> | arch/arm/boot/compressed/head.S:127: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
> | arch/arm/boot/compressed/head.S:134: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
> | arch/arm/boot/compressed/head.S:136: Error: selected processor does not support requested special purpose register -- `msr cpsr_c,r2'
> | make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
> | make[2]: *** Waiting for unfinished jobs....
> | make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
> | make: *** [uImage] Error 2
> | ERROR: oe_runmake failed
> NOTE: package linux-ti33x-psp-3.1-r0: task do_compile: Failed
> ERROR: Task 352 (/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp_3.1.bb, do_compile) failed with exit code '1'
>
> Looks like an incompatibility with the tools
> Angstrom = gcc-cross-4.5-r45+svnr181733
> Yocto = gcc-cross-4.6.2+svnr181430-r20
Or possibly:
Angstrom = binutils-cross-2.20.1-r9
Yocto = binutils-cross-2.22-r2
>
> Oh well...
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 15:24 ` Gary Thomas
@ 2012-01-26 15:28 ` Jack Mitchell
2012-01-26 15:38 ` Brian Hutchinson
0 siblings, 1 reply; 14+ messages in thread
From: Jack Mitchell @ 2012-01-26 15:28 UTC (permalink / raw)
To: yocto
On 26/01/12 15:24, Gary Thomas wrote:
> On 2012-01-26 08:07, Gary Thomas wrote:
>> On 2012-01-26 07:06, Gary Thomas wrote:
>>> On 2012-01-26 06:50, Jack Mitchell wrote:
>>>> On 26/01/12 13:27, Gary Thomas wrote:
>>>>> On 2012-01-26 05:35, Gary Thomas wrote:
>>>>>> On 2012-01-26 05:01, Jack Mitchell wrote:
>>>>>>> On 26/01/12 12:00, Koen Kooi wrote:
>>>>>>>> Op 26 jan. 2012, om 12:06 heeft Jack Mitchell het volgende
>>>>>>>> geschreven:
>>>>>>>>
>>>>>>>>> Hello everyone,
>>>>>>>>>
>>>>>>>>> I will soon be receiving a Beaglebone and I wish to transfer
>>>>>>>>> the work I have been doing with Yocto on the Beagleboard over
>>>>>>>>> to the Beaglebone, to show my company how the same
>>>>>>>>> application codebase can be run different platforms using
>>>>>>>>> Linux/Yocto/etc..
>>>>>>>>>
>>>>>>>>> I have been looking at the meta-ti layer and trying to figure
>>>>>>>>> out how it works and how I will integrate it into the yocto
>>>>>>>>> build environment, but I thought I would just throw a
>>>>>>>>> query out to see if anybody is doing this and if there are any
>>>>>>>>> pitfalls I should avoid.
>>>>>>>> There's a README in the meta-ti layer, follow the instructions
>>>>>>>> in there.
>>>>>>>
>>>>>>> Hi Koen,
>>>>>>>
>>>>>>> I understand that there is a readme in the meta-ti layer however
>>>>>>> this refers specifically to using Angstrom and associated
>>>>>>> layers, where as I want to build specifically for
>>>>>>> yocto.
>>>>>>> So I was looking for pointers for abstracting the meta-ti layer
>>>>>>> form angstrom over to Yocto.
>>>>>>
>>>>>> I gave this a try, just adding the meta-ti layer into my stack.
>>>>>> Sadly, it blew up right away with this error:
>>>>>>
>>>>>> ERROR: Failure expanding variable FILESPATH, expression was
>>>>>> ${@base_contains('DISTRO_FEATURES', 'tipspkernel',
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipe
>>>>>>
> s
>>>>>>
>> -
>>>>>>
>>> k
>>>>>>
>>>> e
>>>>>>
>>>>> rn
>>>>>>
>>>>>> el/linux/linux-ti33x-psp-3.1/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta
>>>>>>
> -
>>>>>>
>> t
>>>>>>
>>> i
>>>>>>
>>>> /
>>>>>>
>>>>> re
>>>>>>
>>>>>> cipes-kernel/linux/linux-ti33x-psp/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp/tipspkernel/:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/linux-gnueabi:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/arm:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/build-linux:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/pn-linux-ti33x-psp:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/beaglebone:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/armv7a:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/amltd:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/forcevariable:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/${FEED_ARCH}:/home/local/poky-multi/meta-t
>>>>>>
> i
>>>>>>
>> /
>>>>>>
>>> r
>>>>>>
>>>> e
>>>>>>
>>>>> ci
>>>>>>
>>>>>> pes-kernel/linux/files/tipspkernel/ti33x:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/libc-glibc:/home/local/poky-multi/meta-ti/recipes-kernel/linux/files/tipspkernel/:",
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "", d)}${@base_set_filespath([
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1-r0",
>>>>>>
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>>>>
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp-3.1",
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp",
>>>>>>
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux/files",
>>>>>> "/home/local/poky-multi/meta-ti/recipes-kernel/linux" ], d)}
>>>>>> which triggered exception SyntaxError: EOL while
>>>>>> scanning
>>>>>> string literal (FILESPATH, line 1)
>>>>>> ERROR: Command execution failed: Exited with 1
>>>>>>
>>>>>> I'm not sure what this means or how to diagnose what's wrong.
>>>>>
>>>>> I worked past this. I turns out that my <DISTRO>.conf file had
>>>>> this line in it (needed by some of the OLD meta-texasinstruments
>>>>> recipes):
>>>>> OVERRIDES .= ":${FEED_ARCH}:${SOC_FAMILY}"
>>>>> I took out the FEED_ARCH and now I'm getting farther.
>>>>>
>>>>> Next hurdle:
>>>>> Could not include required file
>>>>> recipes-images/angstrom/systemd-image.bb
>>>>>
>>>>>>
>>>>>> n.b. I have done the same thing successfully before with the
>>>>>> Angstrom meta-texasinstruments layer (which I know has been
>>>>>> deprecated and replaced by meta-ti), so I know the process can
>>>>>> work.
>>>>>>
>>>>>
>>>> From a clean poky edison build directory with machine_beagleboard
>>>> selected and the meta-ti layer enabled last in my bblayers conf I
>>>> receive this error:
>>>>
>>>> ERROR: Could not inherit file classes/systemd.bbclass
>>>>
>>>> However I cannot find where this is being called from in the
>>>> meta-ti layer.. it seems very similar to what Gary has run into...
>>>
>>> Try adding this to local.conf
>>> BBMASK = ".*/meta-ti/recipes-misc/"
>>> This will let bitbake skip the troublesome recipes. Since you're
>>> interested in building Yocto, it should be OK.
>>
>> Next, problem: I tried to build for my BeagleBone, but the kernel
>> build failed with this error:
>> | arch/arm/boot/compressed/head.S: Assembler messages:
>> | arch/arm/boot/compressed/head.S:127: Error: selected processor does
>> not support requested special purpose register -- `mrs r2,cpsr'
>> | arch/arm/boot/compressed/head.S:134: Error: selected processor does
>> not support requested special purpose register -- `mrs r2,cpsr'
>> | arch/arm/boot/compressed/head.S:136: Error: selected processor does
>> not support requested special purpose register -- `msr cpsr_c,r2'
>> | make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
>> | make[2]: *** Waiting for unfinished jobs....
>> | make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
>> | make: *** [uImage] Error 2
>> | ERROR: oe_runmake failed
>> NOTE: package linux-ti33x-psp-3.1-r0: task do_compile: Failed
>> ERROR: Task 352
>> (/home/local/poky-multi/meta-ti/recipes-kernel/linux/linux-ti33x-psp_3.1.bb,
>> do_compile) failed with exit code '1'
>>
>> Looks like an incompatibility with the tools
>> Angstrom = gcc-cross-4.5-r45+svnr181733
>> Yocto = gcc-cross-4.6.2+svnr181430-r20
>
> Or possibly:
> Angstrom = binutils-cross-2.20.1-r9
> Yocto = binutils-cross-2.22-r2
>
>>
>> Oh well...
>>
>
So are these pre-compiled binaries that cannot be linked... or something
along those lines?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 15:28 ` Jack Mitchell
@ 2012-01-26 15:38 ` Brian Hutchinson
2012-02-20 6:39 ` Andrea Galbusera
0 siblings, 1 reply; 14+ messages in thread
From: Brian Hutchinson @ 2012-01-26 15:38 UTC (permalink / raw)
To: Jack Mitchell; +Cc: yocto
I grabbed a bag of chips and a beverage ... watching this thread! I'm
right behind you guys so thanks for blazing the trail. I have other
TI parts to work with but starting with first BeagleBoard (&
BeagleBone) since that is the reference.
Regards,
Brian
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-01-26 15:38 ` Brian Hutchinson
@ 2012-02-20 6:39 ` Andrea Galbusera
2012-02-20 9:29 ` Jack Mitchell
0 siblings, 1 reply; 14+ messages in thread
From: Andrea Galbusera @ 2012-02-20 6:39 UTC (permalink / raw)
To: Brian Hutchinson; +Cc: yocto
Hi,
On Thu, Jan 26, 2012 at 4:38 PM, Brian Hutchinson <b.hutchman@gmail.com> wrote:
> I grabbed a bag of chips and a beverage ... watching this thread! I'm
> right behind you guys so thanks for blazing the trail. I have other
> TI parts to work with but starting with first BeagleBoard (&
> BeagleBone) since that is the reference.
Was this an happy ending story? Where you guys successful in building
meta-ti layer under Yocto umbrella?
Regards,
Andrea
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-02-20 6:39 ` Andrea Galbusera
@ 2012-02-20 9:29 ` Jack Mitchell
2012-02-21 16:28 ` Andrea Galbusera
0 siblings, 1 reply; 14+ messages in thread
From: Jack Mitchell @ 2012-02-20 9:29 UTC (permalink / raw)
To: Andrea Galbusera; +Cc: yocto
On 20/02/12 06:39, Andrea Galbusera wrote:
> Hi,
>
> On Thu, Jan 26, 2012 at 4:38 PM, Brian Hutchinson<b.hutchman@gmail.com> wrote:
>> I grabbed a bag of chips and a beverage ... watching this thread! I'm
>> right behind you guys so thanks for blazing the trail. I have other
>> TI parts to work with but starting with first BeagleBoard (&
>> BeagleBone) since that is the reference.
>
> Was this an happy ending story? Where you guys successful in building
> meta-ti layer under Yocto umbrella?
>
> Regards,
> Andrea
It's still in the air at the moment. Texas Instruments are going through
a process to abstract meta-ti layer into a pure BSP and cut out all the
distro specific features. When this is complete then it will be good to
go in Yocto.
If you look at the archives of the meta-ti mailing list there has been
extensive discussions on it recently.
Cheers,
Jack.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: BeagleBone with meta-ti layer
2012-02-20 9:29 ` Jack Mitchell
@ 2012-02-21 16:28 ` Andrea Galbusera
0 siblings, 0 replies; 14+ messages in thread
From: Andrea Galbusera @ 2012-02-21 16:28 UTC (permalink / raw)
To: Jack Mitchell; +Cc: yocto@yoctoproject.org
Hi Jack,
Il giorno 20/feb/2012, alle ore 10:29, Jack Mitchell <ml@communistcode.co.uk> ha scritto:
> On 20/02/12 06:39, Andrea Galbusera wrote:
>> Hi,
>>
>> On Thu, Jan 26, 2012 at 4:38 PM, Brian Hutchinson<b.hutchman@gmail.com> wrote:
>>> I grabbed a bag of chips and a beverage ... watching this thread! I'm
>>> right behind you guys so thanks for blazing the trail. I have other
>>> TI parts to work with but starting with first BeagleBoard (&
>>> BeagleBone) since that is the reference.
>>
>> Was this an happy ending story? Where you guys successful in building
>> meta-ti layer under Yocto umbrella?
>>
>> Regards,
>> Andrea
>
> It's still in the air at the moment. Texas Instruments are going through a process to abstract meta-ti layer into a pure BSP and cut out all the distro specific features. When this is complete then it will be good to go in Yocto.
>
> If you look at the archives of the meta-ti mailing list there has been extensive discussions on it recently.
Thanks for pointing me to the relevant discussion. I joined meta-ti list too now.
Cheers,
Andrea
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-02-21 16:28 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-26 11:06 BeagleBone with meta-ti layer Jack Mitchell
2012-01-26 12:00 ` Koen Kooi
2012-01-26 12:01 ` Jack Mitchell
2012-01-26 12:35 ` Gary Thomas
2012-01-26 13:27 ` Gary Thomas
2012-01-26 13:50 ` Jack Mitchell
2012-01-26 14:06 ` Gary Thomas
2012-01-26 15:07 ` Gary Thomas
2012-01-26 15:24 ` Gary Thomas
2012-01-26 15:28 ` Jack Mitchell
2012-01-26 15:38 ` Brian Hutchinson
2012-02-20 6:39 ` Andrea Galbusera
2012-02-20 9:29 ` Jack Mitchell
2012-02-21 16:28 ` Andrea Galbusera
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.