All of lore.kernel.org
 help / color / mirror / Atom feed
From: Larry Finger <Larry.Finger@lwfinger.net>
To: "Devendra.Naga" <devendra.aaru@gmail.com>
Cc: chaoming_li@realsil.com.cn, linville@tuxdriver.com,
	paul.gortmaker@windriver.com, joe@perches.com,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] wireless: move ifs' in _rtl92c_store_pwrIndex_diffrate_offset into elseif statements
Date: Mon, 30 Jan 2012 17:38:23 -0600	[thread overview]
Message-ID: <4F2729EF.8090309@lwfinger.net> (raw)
In-Reply-To: <1327906245-8200-1-git-send-email-devendra.aaru@gmail.com>

On 01/30/2012 12:50 AM, Devendra.Naga wrote:
> From: "Devendra.Naga"<devendra.aaru@gmail.com>
>
>          The regaddr is compared against different rates in each case and the powerlevels are set
>          accordingly. as this can match for the first if and we still check for other powerlevels too,
>          use else if ratherthan using if statements
> Signed-off-by: Devendra.Naga<devendra.aaru@gmail.com>
> ---
>   drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c |   47 +++++++------------
>   1 files changed, 17 insertions(+), 30 deletions(-)

Another bad patch title. The component changed is rtlwifi: rtl8192c:, not wireless.

Larry

>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
> index 22e998d..cb11e5a 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
> @@ -260,106 +260,93 @@ void _rtl92c_store_pwrIndex_diffrate_offset(struct ieee80211_hw *hw,
>   			 "MCSTxPowerLevelOriginalOffset[%d][0] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][0]);
> -	}
> -	if (regaddr == RTXAGC_A_RATE54_24) {
> +	} else if (regaddr == RTXAGC_A_RATE54_24) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][1] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][1] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][1]);
> -	}
> -	if (regaddr == RTXAGC_A_CCK1_MCS32) {
> +	} else if (regaddr == RTXAGC_A_CCK1_MCS32) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][6] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][6] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][6]);
> -	}
> -	if (regaddr == RTXAGC_B_CCK11_A_CCK2_11&&  bitmask == 0xffffff00) {
> +	} else if (regaddr == RTXAGC_B_CCK11_A_CCK2_11&&
> +		bitmask == 0xffffff00) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][7] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][7] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][7]);
> -	}
> -	if (regaddr == RTXAGC_A_MCS03_MCS00) {
> +	} else if (regaddr == RTXAGC_A_MCS03_MCS00) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][2] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][2] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][2]);
> -	}
> -	if (regaddr == RTXAGC_A_MCS07_MCS04) {
> +	} else if (regaddr == RTXAGC_A_MCS07_MCS04) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][3] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][3] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][3]);
> -	}
> -	if (regaddr == RTXAGC_A_MCS11_MCS08) {
> +	} else if (regaddr == RTXAGC_A_MCS11_MCS08) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][4] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][4] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][4]);
> -	}
> -	if (regaddr == RTXAGC_A_MCS15_MCS12) {
> +	} else if (regaddr == RTXAGC_A_MCS15_MCS12) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][5] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][5] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][5]);
> -	}
> -	if (regaddr == RTXAGC_B_RATE18_06) {
> +	} else if (regaddr == RTXAGC_B_RATE18_06) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][8] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][8] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][8]);
> -	}
> -	if (regaddr == RTXAGC_B_RATE54_24) {
> +	} else if (regaddr == RTXAGC_B_RATE54_24) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][9] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][9] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][9]);
> -	}
> -	if (regaddr == RTXAGC_B_CCK1_55_MCS32) {
> +	} else if (regaddr == RTXAGC_B_CCK1_55_MCS32) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][14] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][14] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][14]);
> -	}
> -	if (regaddr == RTXAGC_B_CCK11_A_CCK2_11&&  bitmask == 0x000000ff) {
> +	} else if (regaddr == RTXAGC_B_CCK11_A_CCK2_11&&
> +		bitmask == 0x000000ff) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][15] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][15] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][15]);
> -	}
> -	if (regaddr == RTXAGC_B_MCS03_MCS00) {
> +	} else if (regaddr == RTXAGC_B_MCS03_MCS00) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][10] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][10] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][10]);
> -	}
> -	if (regaddr == RTXAGC_B_MCS07_MCS04) {
> +	} else if (regaddr == RTXAGC_B_MCS07_MCS04) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][11] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][11] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][11]);
> -	}
> -	if (regaddr == RTXAGC_B_MCS11_MCS08) {
> +	} else if (regaddr == RTXAGC_B_MCS11_MCS08) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][12] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][12] = 0x%x\n",
>   			 rtlphy->pwrgroup_cnt,
>   			 rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][12]);
> -	}
> -	if (regaddr == RTXAGC_B_MCS15_MCS12) {
> +	} else if (regaddr == RTXAGC_B_MCS15_MCS12) {
>   		rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][13] = data;
>   		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
>   			 "MCSTxPowerLevelOriginalOffset[%d][13] = 0x%x\n",


  reply	other threads:[~2012-01-30 23:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-30  6:50 [PATCH 1/1] wireless: move ifs' in _rtl92c_store_pwrIndex_diffrate_offset into elseif statements Devendra.Naga
2012-01-30 23:38 ` Larry Finger [this message]
2012-02-05  8:12 ` Jan Ceuleers
2012-02-05 16:05   ` Larry Finger
2012-02-06 11:26     ` David Laight

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F2729EF.8090309@lwfinger.net \
    --to=larry.finger@lwfinger.net \
    --cc=chaoming_li@realsil.com.cn \
    --cc=devendra.aaru@gmail.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=netdev@vger.kernel.org \
    --cc=paul.gortmaker@windriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.