Re: [PATCH 1/2] ath9k: recover the chip from tx/rx stuck

[Ben Greear <greearb@candelatech.com>]

On 02/01/2012 08:05 AM, Rajkumar Manoharan wrote:
> In the following scenario, where the distance b/w STA and AP is ~10m
> or in a shield environment by placing an attenuator with reduced AP
> txpower, the station started reporting with beacon loss and got
> disconnected whenever the chariot endpoint was initiated with BiDi
> traffic. In such state, two different stuck cases were observed.
>
>    * rx clear is stuck at low for more than 100ms
>    * dcu chain and complete state is stuck.
>
> This patch detects the stuck state if the beacons are not received for
> more than 300ms. In the above matching conditions, trigger a chip
> reset to recover. This issue was originally reported in 3.0 kernel with
> AR9382 chip by having two stations associated with two different APs in
> the same channel and was attenuated/controlled by Azimuth ADEPT-n box.

Can't the AP be configured for larger beacon intervals?  Maybe have it
be some multiple of that instead of a fixed 300ms?

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com