Re: Various build failures in current bzr tree

["Vladimir 'φ-coder/phcoder' Serbinenko" <phcoder@gmail.com>]

On 09.02.2012 21:56, Lennart Sorensen wrote:
> On Thu, Feb 09, 2012 at 03:50:45PM -0500, Lennart Sorensen wrote:
>> grub-install also still (as reported about 2 years ago) tries to use
>> $grub_device rather than $install_device when getting the partition
>> table type.
>>
>> However, I did now manage to boot after fixing that.
>>
>> So there is a chance I can make a patch to fix grub-install soon so it
>> actually works on IBM power systems.  Given I have a production machine
>> and a new machine around for a few days I can experiment until it
>> is right.
> Is this supposed to work:
>
> root@rceng03new:~# /usr/sbin/grub-probe --device /dev/md0 --target=abstraction
> diskfilter mdraid1x
> root@rceng03new:~# /usr/sbin/grub-probe --device /dev/md1 --target=abstraction
> /usr/sbin/grub-probe: error: Couldn't find PV (null). Check your device.map.
>
> md0 is raid1, md1 is raid5, but with a missing device at the moment.
>
> Does grub-probe not work if the raid5 isn't fully healthy?
>
The problem is how to figure out which partmap module is used on the 
missing disk (which isn't necessarily the same as on the other disks). 
Do you have any ideas?

-- 
Regards
Vladimir 'φ-coder/phcoder' Serbinenko