Re: [PATCH] stmmac: fix driver features

[Giuseppe CAVALLARO <peppe.cavallaro@st.com>]

On 2/10/2012 8:40 AM, David Miller wrote:
> From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
> Date: Fri, 10 Feb 2012 08:08:54 +0100
> 
>> Hello David
>>
>> On 2/9/2012 9:35 PM, David Miller wrote:
>>> This is not the purpose of the fix_features method, it's meant to
>>> ensure that the settings are valid.
>>>
>>> It's not meant to "catch up" with settings you store in the internal
>>> datastructures of your driver.
>>>
>>> You need to do this at probe time, where the initial ->hw_features
>>> and ->features values are set.
>>
>> Initially the driver HW features are indeed set in the probe but in the
>> stmmac_open function, after looking at the HW cap reg, some parameters,
>> for example the HW csum, can be overridden and the
>> netdev_update_features is called. IIUC the netdev_update_features calls
>> the driver's ndo_fix_features. For this reason I improved the
>> stmmac_fix_feature function to cover more setting. Anyway, if I cannot
>> use this function I should move from the open to the probe the logic to
>> manage the MAC identification and HW cap register. What do you suggest?
> 
> You should not be determining chip features in your open method,
> such work belongs in your device probe.
> 
ok, I'll rework this and send you all the patches again in a bundle.

peppe