From: Hollis Blanchard <hollis_blanchard@mentor.com>
To: <yocto@yoctoproject.org>
Subject: missing USB gadget support on beagleboard?
Date: Tue, 14 Feb 2012 16:12:47 -0800 [thread overview]
Message-ID: <4F3AF87F.8010806@mentor.com> (raw)
Hi, I'm sure I'm missing something simple, but I just built Poky from
git for beagleboard, and can't figure out USB networking. I expected to
find g_cdc and g_ether modules in
/lib/modules/3.0.18-yocto-standard+/kernel/drivers/usb, but that
directory doesn't actually exist (I guess the drivers are built-in to
this kernel).
I have MACHINE ??= beagleboard in local.conf, and "bitbake
core-image-minimal" did produce a working kernel, uboot, etc. I see some
USB messages at boot (see below), but although cdc_ether is mentioned,
ifconfig -a lists only loopback.
Any suggestions? Thanks!
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
_regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
_regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
--
Hollis Blanchard
Mentor Graphics, Embedded Systems Division
next reply other threads:[~2012-02-15 0:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-15 0:12 Hollis Blanchard [this message]
2012-02-15 6:24 ` missing USB gadget support on beagleboard? McClintock Matthew-B29882
2012-02-15 6:33 ` McClintock Matthew-B29882
2012-02-15 23:20 ` Hollis Blanchard
2012-02-15 23:23 ` McClintock Matthew-B29882
2012-02-16 0:35 ` Bruce Ashfield
2012-02-16 0:49 ` Hollis Blanchard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F3AF87F.8010806@mentor.com \
--to=hollis_blanchard@mentor.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.