From: Peter Katzmann <peter.katzmann@edag.de>
To: buildroot@busybox.net
Subject: [Buildroot] 2012.02rc1 socat build problems with uclibc 0.9.33
Date: Wed, 15 Feb 2012 12:40:04 +0100 [thread overview]
Message-ID: <4F3B9994.3010706@edag.de> (raw)
Hello List,
i' m evaluating the build with the new relase candidate and run into
trouble with socat.
When i enable the new dns faeture in uclibc socat build well but my
asterisk build fails with problems.
Build with uclibc-0.92.2 works well
peter
/usr2/new/Source-guru/buildroot/project_build_arm/usr/bin/ccache
/usr2/new/Source-guru/buildroot/project_build_arm/usr/bin/arm-unknown-linux-uclibcgnueabi-gcc
-O2 -pipe -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -Wall -Wno-parentheses
-DHAVE_CONFIG_H -I. -o filan filan_main.o filan.o fdname.o error.o
sycls.o sysutils.o utils.o -lutil -lssl -lcrypto -lpthread
/usr2/new/Source-guru/buildroot/project_build_arm/usr/bin/ccache
/usr2/new/Source-guru/buildroot/project_build_arm/usr/bin/arm-unknown-linux-uclibcgnueabi-gcc
-O2 -pipe -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -Wall -Wno-parentheses
-DHAVE_CONFIG_H -I. -o socat socat.o libxio.a -lutil -lssl -lcrypto
-lpthread
libxio.a(xio-ip.o): In function `Res_init':
xio-ip.c:(.text+0x14): undefined reference to `__res_init'
libxio.a(xio-ip.o): In function `res_opts':
xio-ip.c:(.text+0x44): undefined reference to `__res_state'
libxio.a(xio-ip.o): In function `xiogetaddrinfo':
xio-ip.c:(.text+0xb0): undefined reference to `__res_state'
xio-ip.c:(.text+0x1e0): undefined reference to `__res_state'
xio-ip.c:(.text+0x490): undefined reference to `__res_state'
xio-ip.c:(.text+0x4d0): undefined reference to `__res_state'
collect2: ld returned 1 exit status
make[2]: *** [socat] Fehler 1
--
EDAG GmbH& Co.KG aA
Steinauer Stra?e 20
36100 Petersberg
Tel.: +49 - (0)661 / 6000 - 9444
Fax: +49 - (0)661 / 6000 - 1116208
E-Mail: Peter.Katzmann at edag.de
-------------- next part --------------
#
# Automatically generated make config: don't edit
# Version: 0.9.32.1
# Mon Jan 30 14:50:26 2012
#
# TARGET_alpha is not set
TARGET_arm=y
# TARGET_avr32 is not set
# TARGET_bfin is not set
# TARGET_cris is not set
# TARGET_e1 is not set
# TARGET_frv is not set
# TARGET_h8300 is not set
# TARGET_hppa is not set
# TARGET_i386 is not set
# TARGET_i960 is not set
# TARGET_ia64 is not set
# TARGET_m68k is not set
# TARGET_microblaze is not set
# TARGET_mips is not set
# TARGET_nios is not set
# TARGET_nios2 is not set
# TARGET_powerpc is not set
# TARGET_sh is not set
# TARGET_sh64 is not set
# TARGET_sparc is not set
# TARGET_v850 is not set
# TARGET_vax is not set
# TARGET_x86_64 is not set
# TARGET_xtensa is not set
# TARGET_c6x is not set
#
# Target Architecture Features and Options
#
TARGET_ARCH="arm"
FORCE_OPTIONS_FOR_ARCH=y
# CONFIG_ARM_OABI is not set
CONFIG_ARM_EABI=y
# CONFIG_GENERIC_ARM is not set
# CONFIG_ARM610 is not set
# CONFIG_ARM710 is not set
# CONFIG_ARM7TDMI is not set
# CONFIG_ARM720T is not set
# CONFIG_ARM920T is not set
# CONFIG_ARM922T is not set
CONFIG_ARM926T=y
# CONFIG_ARM10T is not set
# CONFIG_ARM1136JF_S is not set
# CONFIG_ARM1176JZ_S is not set
# CONFIG_ARM1176JZF_S is not set
# CONFIG_ARM_CORTEX_M3 is not set
# CONFIG_ARM_CORTEX_M1 is not set
# CONFIG_ARM_SA110 is not set
# CONFIG_ARM_SA1100 is not set
# CONFIG_ARM_XSCALE is not set
# CONFIG_ARM_IWMMXT is not set
USE_BX=y
TARGET_SUBARCH=""
#
# Using ELF file format
#
ARCH_ANY_ENDIAN=y
ARCH_LITTLE_ENDIAN=y
# ARCH_WANTS_BIG_ENDIAN is not set
ARCH_WANTS_LITTLE_ENDIAN=y
ARCH_HAS_MMU=y
ARCH_USE_MMU=y
UCLIBC_HAS_FLOATS=y
# UCLIBC_HAS_FPU is not set
UCLIBC_HAS_SOFT_FLOAT=y
DO_C99_MATH=y
# DO_XSI_MATH is not set
# UCLIBC_HAS_FENV is not set
KERNEL_HEADERS="/usr2/new/Source-guru/buildroot/project_build_arm/toolchain/linux/include"
HAVE_DOT_CONFIG=y
#
# General Library Settings
#
# HAVE_NO_PIC is not set
DOPIC=y
# ARCH_HAS_NO_SHARED is not set
# ARCH_HAS_NO_LDSO is not set
HAVE_SHARED=y
# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
LDSO_LDD_SUPPORT=y
# LDSO_CACHE_SUPPORT is not set
LDSO_PRELOAD_ENV_SUPPORT=y
# LDSO_PRELOAD_FILE_SUPPORT is not set
# UCLIBC_STATIC_LDCONFIG is not set
# LDSO_RUNPATH is not set
LDSO_SEARCH_INTERP_PATH=y
UCLIBC_CTOR_DTOR=y
LDSO_GNU_HASH_SUPPORT=y
# HAS_NO_THREADS is not set
# LINUXTHREADS_OLD is not set
# LINUXTHREADS_NEW is not set
UCLIBC_HAS_THREADS_NATIVE=y
UCLIBC_HAS_THREADS=y
UCLIBC_HAS_TLS=y
# PTHREADS_DEBUG_SUPPORT is not set
UCLIBC_HAS_SYSLOG=y
UCLIBC_HAS_LFS=y
# MALLOC is not set
# MALLOC_SIMPLE is not set
MALLOC_STANDARD=y
# MALLOC_GLIBC_COMPAT is not set
UCLIBC_DYNAMIC_ATEXIT=y
# COMPAT_ATEXIT is not set
UCLIBC_SUSV3_LEGACY=y
UCLIBC_SUSV3_LEGACY_MACROS=y
UCLIBC_SUSV4_LEGACY=y
# UCLIBC_STRICT_HEADERS is not set
# UCLIBC_HAS_STUBS is not set
UCLIBC_HAS_SHADOW=y
# UCLIBC_HAS_PROGRAM_INVOCATION_NAME is not set
UCLIBC_HAS_PTY=y
ASSUME_DEVPTS=y
UNIX98PTY_ONLY=y
UCLIBC_HAS_GETPT=y
UCLIBC_HAS_LIBUTIL=y
UCLIBC_HAS_TM_EXTENSIONS=y
UCLIBC_HAS_TZ_CACHING=y
UCLIBC_HAS_TZ_FILE=y
UCLIBC_HAS_TZ_FILE_READ_MANY=y
UCLIBC_TZ_FILE_PATH="/etc/TZ"
UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y
#
# Advanced Library Settings
#
UCLIBC_PWD_BUFFER_SIZE=256
UCLIBC_GRP_BUFFER_SIZE=256
#
# Support various families of functions
#
UCLIBC_LINUX_MODULE_24=y
UCLIBC_LINUX_SPECIFIC=y
UCLIBC_HAS_GNU_ERROR=y
# UCLIBC_BSD_SPECIFIC is not set
# UCLIBC_HAS_BSD_ERR is not set
# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set
# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
# UCLIBC_NTP_LEGACY is not set
# UCLIBC_SV4_DEPRECATED is not set
UCLIBC_HAS_REALTIME=y
UCLIBC_HAS_ADVANCED_REALTIME=y
UCLIBC_HAS_EPOLL=y
UCLIBC_HAS_XATTR=y
UCLIBC_HAS_PROFILING=y
UCLIBC_HAS_CRYPT_IMPL=y
UCLIBC_HAS_CRYPT=y
UCLIBC_HAS_NETWORK_SUPPORT=y
UCLIBC_HAS_SOCKET=y
UCLIBC_HAS_IPV4=y
# UCLIBC_HAS_IPV6 is not set
# UCLIBC_HAS_RPC is not set
UCLIBC_USE_NETLINK=y
# UCLIBC_SUPPORT_AI_ADDRCONFIG is not set
# UCLIBC_HAS_BSD_RES_CLOSE is not set
# UCLIBC_HAS_COMPAT_RES_STATE is not set
# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set
UCLIBC_HAS_LIBRESOLV_STUB=y
# UCLIBC_HAS_LIBNSL_STUB is not set
#
# String and Stdio Support
#
UCLIBC_HAS_STRING_GENERIC_OPT=y
UCLIBC_HAS_STRING_ARCH_OPT=y
UCLIBC_HAS_CTYPE_TABLES=y
UCLIBC_HAS_CTYPE_SIGNED=y
# UCLIBC_HAS_CTYPE_UNSAFE is not set
UCLIBC_HAS_CTYPE_CHECKED=y
# UCLIBC_HAS_CTYPE_ENFORCED is not set
UCLIBC_HAS_WCHAR=y
# UCLIBC_HAS_LOCALE is not set
UCLIBC_HAS_HEXADECIMAL_FLOATS=y
UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
UCLIBC_HAS_STDIO_BUFSIZ_4096=y
# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE is not set
UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4=y
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
UCLIBC_HAS_STDIO_GETC_MACRO=y
UCLIBC_HAS_STDIO_PUTC_MACRO=y
UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
UCLIBC_HAS_PRINTF_M_SPEC=y
# UCLIBC_HAS_ERRNO_MESSAGES is not set
# UCLIBC_HAS_SIGNUM_MESSAGES is not set
UCLIBC_HAS_GNU_GETOPT=y
UCLIBC_HAS_STDIO_FUTEXES=y
# UCLIBC_HAS_GNU_GETSUBOPT is not set
#
# Big and Tall
#
UCLIBC_HAS_REGEX=y
# UCLIBC_HAS_REGEX_OLD is not set
UCLIBC_HAS_FNMATCH=y
# UCLIBC_HAS_FNMATCH_OLD is not set
# UCLIBC_HAS_WORDEXP is not set
# UCLIBC_HAS_NFTW is not set
# UCLIBC_HAS_FTW is not set
# UCLIBC_HAS_FTS is not set
UCLIBC_HAS_GLOB=y
UCLIBC_HAS_GNU_GLOB=y
# UCLIBC_HAS_UTMPX is not set
#
# Library Installation Options
#
RUNTIME_PREFIX="/"
DEVEL_PREFIX="/usr/"
MULTILIB_DIR="lib"
HARDWIRED_ABSPATH=y
#
# Security options
#
# UCLIBC_BUILD_PIE is not set
UCLIBC_HAS_ARC4RANDOM=y
# HAVE_NO_SSP is not set
# UCLIBC_HAS_SSP is not set
UCLIBC_BUILD_RELRO=y
UCLIBC_BUILD_NOW=y
# UCLIBC_BUILD_NOEXECSTACK is not set
#
# uClibc development/debugging options
#
CROSS_COMPILER_PREFIX="/usr2/new/Source-guru/buildroot/project_build_arm/hp/usr/bin/arm-unknown-linux-uclibcgnueabi-"
UCLIBC_EXTRA_CFLAGS=""
# DODEBUG is not set
DOSTRIP=y
# DOASSERTS is not set
# SUPPORT_LD_DEBUG is not set
# SUPPORT_LD_DEBUG_EARLY is not set
# UCLIBC_MALLOC_DEBUGGING is not set
# UCLIBC_HAS_BACKTRACE is not set
WARNINGS="-Wall"
EXTRA_WARNINGS=y
# DOMULTI is not set
# UCLIBC_MJN3_ONLY is not set
next reply other threads:[~2012-02-15 11:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-15 11:40 Peter Katzmann [this message]
2012-02-15 16:07 ` [Buildroot] 2012.02rc1 socat build problems with uclibc 0.9.33 Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F3B9994.3010706@edag.de \
--to=peter.katzmann@edag.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.