From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Weber <thomas.weber.linux@googlemail.com>
Date: Fri, 17 Feb 2012 10:02:02 +0100
Subject: [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
In-Reply-To: <1327311852-2868-1-git-send-email-rachna@ti.com>
References: <1327311852-2868-1-git-send-email-rachna@ti.com>
Message-ID: <4F3E178A.4030802@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Rachna,

I get multiple timeouts from wait_for_status_mask() during i2c_write(),
 line 481.

The Result is 1410h und status_mask is 7h.

I use a devkit8000, booting from sd-card.


Regards,
Thomas


U-Boot SPL 2011.12-00323-g9a3aae2-dirty (Feb 17 2012 - 09:30:36)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
reading u-boot.img
reading u-boot.img


U-Boot 2011.12-00323-g9a3aae2-dirty (Feb 17 2012 - 09:30:36)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 DevKit8000 + LPDDR/NAND
I2C:   ready
DRAM:  128 MiB
NAND:  128 MiB
MMC:   OMAP SD/MMC: 0
NAND read from offset 260000 failed -74
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
timed out in wait_for_status_mask: I2C_STAT=1410
ethaddr not set, using Die ID
Die ID #1d82000400000000040365f90100b017
Net:   dm9000
Hit any key to stop autoboot:  0
OMAP3 DevKit8000 #