From: Stephane Grosjean <s.grosjean@peak-system.com>
To: Oliver Hartkopp <socketcan@hartkopp.net>,
Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Subject: About peak_pci PATH v6.1
Date: Mon, 20 Feb 2012 12:25:24 +0100 [thread overview]
Message-ID: <4F422DA4.1080703@peak-system.com> (raw)
Hi Oliver,
I found that the i2c_transfer() is able to sleep, which is generally
*not* a good idea when in an interrupt context...
So, I changed the delay management with a delayed work mechanism. I
successfully tested the change on my testbed, but as you know, this is
not the best place for testing...
I hope you will be able to find some time to test that new patch.
@Marc: the peak_pci and peak_pcmcia patches bring modifications to the
can/sja1000 dir Kconfig and Makefile, So the apply sequence order is
critical (I mean, the peak_pci patch must be applied before the
peak_pcmcia, because of lines numbers). How to fix that? I first
proposed to use a serie of patches but this was not approved...
Regards,
Stéphane
--
PEAK-System Technik GmbH, Otto-Roehm-Strasse 69, D-64293 Darmstadt
Geschaeftsleitung: A.Gach/U.Wilhelm,St.Nr.:007/241/13586 FA Darmstadt
HRB-9183 Darmstadt, Ust.IdNr.:DE 202220078, WEE-Reg.-Nr.: DE39305391
Tel.+49 (0)6151-817320 / Fax:+49 (0)6151-817329, info@peak-system.com
next reply other threads:[~2012-02-20 11:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-20 11:25 Stephane Grosjean [this message]
2012-02-20 12:18 ` About peak_pci PATH v6.1 Marc Kleine-Budde
2012-02-20 13:25 ` Stephane Grosjean
2012-02-23 15:28 ` Stephane Grosjean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F422DA4.1080703@peak-system.com \
--to=s.grosjean@peak-system.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.