[U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset

[Stefano Babic <sbabic@denx.de>]

On 22/02/2012 09:14, Dirk Behme wrote:
> On 21.02.2012 22:49, stefano babic wrote:
>> Am 21/02/2012 20:18, schrieb Dirk Behme:
>>

Hi Dirk,

> What do you think about anything like below then [1]?
> 
> I looked through the imximage.c code and, well, due to the mixture to
> support the v1 and v2 header format, the execution path isn't the
> cleanest one. So, while it doesn't seem to be the cleanest way to exit
> directly in set_imx_hdr_v2, it seems to be the easiest and best place to
> add this check. Some other functions have some exit() calls, too, so it
> seems to be common practice in this code.

It is common in all mkimage - when there is an error, it makes no sense
to go on.

You must also fix this issue for V1 in set_imx_hdr_v1() as well, because
we do not want default value at all. I suggest also you do not check
with if(imxhdr->flash_offset == 0), in case Freescale will put a SOC
without an offset in the future. But it is easy to add a value that is
not allowed. If we add something like

	FLASH_OFFSET_UNDEFINED = 0xFF

or whatever you want that is not 32-bit aligned, we are on the safest side.

> 
> If this is ok, I will send a v2 of the patch.

Ok, thanks.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================