From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Date: Wed, 22 Feb 2012 11:46:02 +0100 [thread overview]
Message-ID: <4F44C76A.6070000@denx.de> (raw)
In-Reply-To: <4F44C3E2.2020706@de.bosch.com>
On 22/02/2012 11:30, Dirk Behme wrote:
> On 22.02.2012 11:24, Stefano Babic wrote:
> ...
>> It boots from NOR (128 MB)
>
> Ah. I wonder why I was under the impression that I was the only guy
> fighting with the imximage NOR header pain, then ;)
When something goes wrong, it does for everybody...
>
>> diff --git a/board/esg/ima3-mx53/imximage.cfg
>> b/board/esg/ima3-mx53/imximage.cfg
>> new file mode 100644
>> index 0000000..fa6b42d
>> --- /dev/null
>> +++ b/board/esg/ima3-mx53/imximage.cfg
> ...
>> +# Boot Device : one of
>> +# spi, sd (the board has no nand neither onenand)
>
> Maybe the above comment should be updated for nor? ;)
Yes, I'll do
>
>> +BOOT_FROM nor
>
> I assume that you have tested this and it works with the imximage?
I have not any problem with the current imximage, so I am quite
confused. Agree that you are fixing a bug, but I have not understood why
I have not seen any issue on my board, a MX53 using V2 image header.
My board boots flawlessly from the NOR interface. I will try to
investigate why and, of course, I will be able to test your patch on my
board.
Can you confirm that your board does not boot ? Or are there other
symptoms ?
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2012-02-22 10:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 10:24 [U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs Stefano Babic
2012-05-15 12:39 ` Dirk Behme
2012-06-12 17:02 ` Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 3/9] NET: fec_mxc.c: Add a way to disable auto negotiation Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 4/9] MX5: Add definitions for SATA controller Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 5/9] SATA: check for return value from sata functions Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 6/9] MX53: add function to set SATA clock to internal Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 7/9] SATA: add driver for MX5 / MX6 SOCs Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board Stefano Babic
2012-02-22 10:30 ` Dirk Behme
2012-02-22 10:46 ` Stefano Babic [this message]
2012-02-22 11:46 ` Dirk Behme
2012-02-22 10:24 ` [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support Stefano Babic
2012-02-23 15:40 ` Jason Hui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F44C76A.6070000@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.