From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephane Grosjean Subject: Re: Testing peak_pci v6.1 / peak_usb v6 / peak_pcmcia v4.1 Date: Thu, 23 Feb 2012 16:00:31 +0100 Message-ID: <4F46548F.7050300@peak-system.com> References: <4F44AE8F.4070505@peak-system.com> <4F4511DC.60708@hartkopp.net> <4F4642AA.9060103@volkswagen.de> Reply-To: Stephane Grosjean Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail.peak-system.com ([213.157.13.214]:41595 "EHLO mail.peak-system.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755969Ab2BWPAl (ORCPT ); Thu, 23 Feb 2012 10:00:41 -0500 In-Reply-To: <4F4642AA.9060103@volkswagen.de> Sender: linux-can-owner@vger.kernel.org List-ID: To: Oliver Hartkopp Cc: "linux-can@vger.kernel.org" Hi Oliver, Le 23/02/2012 14:44, Oliver Hartkopp a =E9crit : > Hello Stephane, > > you can add to all these drivers > > - peak_pci v6.1 (http://marc.info/?l=3Dlinux-can&m=3D132973636320107&= w=3D2) > - peak_usb v6 (http://marc.info/?l=3Dlinux-can&m=3D132998590401560&w=3D= 2) > - peak_pcmcia v4.1 (http://marc.info/?l=3Dlinux-pcmcia&m=3D1329387213= 24159&w=3D2) > > my > > Tested-by: Oliver Hartkopp Thanks for all of your precious time. > Just two nitpicks: > > When having traffic the LEDs from the PCIeC are flashing faster than = the PCMCIA LEDs. > With no traffic and interface is up, they are flashing with the same = frequency. =2E.. I should check whether the two boards use the same chip to contro= l=20 the LEDs... But I think that the word "nitpicks" was especially invente= d=20 for that particular issue ;-) > The other one: > > usb 2-2: new high-speed USB device number 4 using ehci_hcd > usb 2-2: config 1 interface 0 altsetting 0 bulk endpoint 0x83 has inv= alid maxpacket 64 > usb 2-2: config 1 interface 1 altsetting 0 bulk endpoint 0x86 has inv= alid maxpacket 64 > peak_usb 2-2:1.0: PEAK-System PCAN-USB Pro hwrev 0 serial FFFFFFFF.00= 000001 (2 channels) > peak_usb 2-2:1.0: can4: attached to PCAN-USB Pro channel 0 (device 1) > peak_usb 2-2:1.0: can5: attached to PCAN-USB Pro channel 1 (device 0) > usbcore: registered new interface driver peak_usb > > Do you have any idea what > > "altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64" > > means? > > Is this something that's caused by your driver or it is caused by the > hardware configuration of the USBpro adapter? I assume it's the latte= r. Yes you're right. These msgs are printed by the usb-core, before the=20 _probe() function of the driver is called. It is something I will send=20 back to our hw team... > Regards, > Oliver > Best regards, St=E9phane -- PEAK-System Technik GmbH, Otto-Roehm-Strasse 69, D-64293 Darmstadt=20 Geschaeftsleitung: A.Gach/U.Wilhelm,St.Nr.:007/241/13586 FA Darmstadt=20 HRB-9183 Darmstadt, Ust.IdNr.:DE 202220078, WEE-Reg.-Nr.: DE39305391=20 Tel.+49 (0)6151-817320 / Fax:+49 (0)6151-817329, info@peak-system.com