From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yegor Yefremov Date: Fri, 24 Feb 2012 08:29:21 +0100 Subject: [Buildroot] BR 2012 & pandaboard :: BOOT issue In-Reply-To: References: Message-ID: <4F473C51.2050500@visionsystems.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net > with BR 2011.11 I couldn't boot using MLO/u-boot.bin/uImage generated while building a basic system. I then change to BR 2012 and I still have the same problem. When using the one provided with an "Ubuntu" distro it start to boot. > I have tried different options for the "boot.script" file called boot.scr and nothing improve it. > > I then have 2 questions: > i) Where it is possible to find documentation to write correct boot.script? as the pdf doc. I found doesn't mention anything helpful according to the memory mapping. On the net I have found different value to start the boot process which one is the good one?... > ii) Why even the uImage created doesn't work, How using BR I can generate correct boot files? I have tried to use MLO/u-boot.bin couple from an Ubuntu distro and use the uImage generated by BR then I got an error message telling me that it couldn't find the kernel! > > I don't know how to solve this problem neither what I could test next to make thing going ahead? If you have any ideaS there are welcome! What toolchain are you using? See this post: http://lists.busybox.net/pipermail/buildroot/2012-February/050089.html Best regards, Yegor