From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mxweb03do.versatel-west.de ([62.214.96.174]:36032 "HELO mxweb03do.versatel-west.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752111Ab2BZKL2 (ORCPT ); Sun, 26 Feb 2012 05:11:28 -0500 Received: from cinnamon-sage.de (i577A7B7C.versanet.de [87.122.123.124]) (authenticated bits=0) by ens28fl.versatel.de (8.12.11.20060308/8.12.11) with SMTP id q1QABJki006848 for ; Sun, 26 Feb 2012 11:11:20 +0100 Received: from 192.168.23.2:49256 by cinnamon-sage.de for , ; 26.02.2012 11:11:19 Message-ID: <4F4A0547.9060903@cinnamon-sage.de> Date: Sun, 26 Feb 2012 11:11:19 +0100 From: Lars Hanisch MIME-Version: 1.0 To: martin@herrman.nl CC: linux-media@vger.kernel.org Subject: Re: [DVB Digital Devices Cine CT V6] status support References: <01cc01ccce54$4f9e9770$eedbc650$@coexsi.fr> <4F0B6480.30900@kaiser-linux.li> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi, Am 25.02.2012 20:35, schrieb Martin Herrman: > Op 10 januari 2012 09:12 schreef Martin Herrman > het volgende: >> >> 2012/1/9 Thomas Kaiser: >> >>> Hello Martin >>> >>> I use the DD Cine CT V6 with DVB-C. It works without problems. >>> I got the driver before Oliver integrated it in his tree. Therefor I did >>> not >>> compile Olivers tree, yet. >>> >>> At the moment I run the card on Ubuntu 11.10 with kernel 3.0.0-14. >>> >>> Hope this helps. >>> >>> Thomas >> >> Hi Thomas, >> >> that is very good news, thanks a lot for the confirmation. Time to >> order one myself! >> >> Regards, >> >> Martin > > So.. couple of weeks later, the card arrived, and I have some time to > play with it. > > Note that I'm running latest stable Ubuntu 64-bit with kernel 3.0.0-16-generic. Since you are using Ubuntu, you can find a nearly up-to-date dkms of linux-media with the patches of Oliver Endriss at https://launchpad.net/~yavdr/+archive/main called linux-media-dkms With this my Cine-C/T with a ddbridge runs without any problems. Regards, Lars. > > First I tried the drivers from > http://linuxtv.org/hg/~endriss/media_build_experimental/. In that > case, dmesg output is: > > [ 11.728370] WARNING: You are using an experimental version of the > media stack. > [ 11.728372] As the driver is backported to an older kernel, it doesn't offer > [ 11.728373] enough quality for its usage in production. > [ 11.728373] Use it with care. > [ 11.728374] Latest git patches (needed if you report a bug to > linux-media@vger.kernel.org): > [ 11.728375] 59b30294e14fa6a370fdd2bc2921cca1f977ef16 Merge branch > 'v4l_for_linus' into staging/for_v3.4 > [ 11.728376] 72565224609a23a60d10fcdf42f87a2fa8f7b16d [media] > cxd2820r: sleep on DVB-T/T2 delivery system switch > [ 11.728377] 46de20a78ae4b122b79fc02633e9a6c3d539ecad [media] > anysee: fix CI init > [ 11.728852] ddbridge: disagrees about version of symbol cxd2099_attach > [ 11.728856] ddbridge: Unknown symbol cxd2099_attach (err -22) > > So I started to try the build instructions found here: > > http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers > > And after compile, install and a reboot, dmesg output is: > > (..) > [ 11.592959] Adding 976892k swap on /dev/sdb2. Priority:-2 > extents:1 across:976892k > [ 11.628781] WARNING: You are using an experimental version of the > media stack. > [ 11.628784] As the driver is backported to an older kernel, it doesn't offer > [ 11.628785] enough quality for its usage in production. > [ 11.628785] Use it with care. > [ 11.628786] Latest git patches (needed if you report a bug to > linux-media@vger.kernel.org): > [ 11.628787] a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e [media] > xc5000: declare firmware configuration structures as static const > [ 11.628788] 6fab81dfdc7b48c2e30ab05e9b30afb0c418bbbe [media] > xc5000: drivers should specify chip revision rather than firmware > [ 11.628790] ddea427fb3e64d817d4432e5efd2abbfc4ddb02e [media] > xc5000: remove static dependencies on xc5000 created by previous > changesets > [ 11.629238] Digital Devices PCIE bridge driver, Copyright (C) > 2010-11 Digital Devices GmbH > [ 11.629298] DDBridge 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 11.629306] DDBridge driver detected: Digital Devices PCIe bridge > [ 11.629331] HW 00010007 FW 00010003 > [ 11.632593] cfg80211: Calling CRDA to update world regulatory domain > [ 11.643411] rt2800pci 0000:05:01.0: PCI INT A -> GSI 19 (level, > low) -> IRQ 19 > (..) > [ 11.781023] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), > (300 mBi, 2000 mBm) > [ 11.844516] skipping empty audio interface (v1) > [ 11.844528] snd-usb-audio: probe of 1-3:1.0 failed with error -5 > [ 11.844540] skipping empty audio interface (v1) > [ 11.844546] snd-usb-audio: probe of 1-3:1.1 failed with error -5 > [ 11.845406] Linux media interface: v0.10 > [ 11.868177] Linux video capture interface: v2.00 > [ 11.868181] WARNING: You are using an experimental version of the > media stack. > [ 11.868182] As the driver is backported to an older kernel, it doesn't offer > [ 11.868183] enough quality for its usage in production. > [ 11.868184] Use it with care. > [ 11.868184] Latest git patches (needed if you report a bug to > linux-media@vger.kernel.org): > [ 11.868185] a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e [media] > xc5000: declare firmware configuration structures as static const > [ 11.868187] 6fab81dfdc7b48c2e30ab05e9b30afb0c418bbbe [media] > xc5000: drivers should specify chip revision rather than firmware > [ 11.868188] ddea427fb3e64d817d4432e5efd2abbfc4ddb02e [media] > xc5000: remove static dependencies on xc5000 created by previous > changesets > [ 12.110903] EXT4-fs (md1): re-mounted. Opts: errors=remount-ro,user_xattr > [ 12.213875] usbcore: registered new interface driver snd-usb-audio > [ 12.213906] uvcvideo: Found UVC 1.00 device (046d:0990) > [ 12.229795] input: UVC Camera (046d:0990) as > /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6 > [ 12.229904] usbcore: registered new interface driver uvcvideo > [ 12.229906] USB Video Class driver (1.1.1) > (..) > > lsmod shows that ddbridge and dvb_core are loaded. /dev/ddbrigde/card0 > is created. My webcam is available as a device below /dev/v4l/, but no > entries exist for the tv-tuner card. > > I can manually load cxd2820r, which loads succesfully, but has no effect. > > Which driver should be used? > > Any hints are grealy appreciated! > > Martin > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >