Re: [PATCH] doc: dt: Fix broken reference in gpio-leds documentation

[Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 02/06/2012 11:29 AM, Tobias Klauser wrote:
> The gpios property is described in Documentation/devicetree/gpio.txt, so
> reference this document.
> 
> Signed-off-by: Tobias Klauser <tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org>

Applied.

Rob

> ---
>  Documentation/devicetree/bindings/gpio/led.txt |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt
> index 141087c..fd2bd56 100644
> --- a/Documentation/devicetree/bindings/gpio/led.txt
> +++ b/Documentation/devicetree/bindings/gpio/led.txt
> @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
>  node's name represents the name of the corresponding LED.
>  
>  LED sub-node properties:
> -- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
> -  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
> -  low LEDs should be indicated using flags in the GPIO specifier.
> +- gpios :  Should specify the LED's GPIO, see "gpios property" in
> +  Documentation/devicetree/gpio.txt.  Active low LEDs should be
> +  indicated using flags in the GPIO specifier.
>  - label :  (optional) The label for this LED.  If omitted, the label is
>    taken from the node name (excluding the unit address).
>  - linux,default-trigger :  (optional) This parameter, if present, is a