From: John Fastabend <john.r.fastabend@intel.com>
To: jhs@mojatatu.com
Cc: jamal <hadi@cyberus.ca>,
Stephen Hemminger <shemminger@vyatta.com>,
bhutchings@solarflare.com, roprabhu@cisco.com,
netdev@vger.kernel.org, mst@redhat.com, chrisw@redhat.com,
davem@davemloft.net, gregory.v.rose@intel.com,
kvm@vger.kernel.org, sri@us.ibm.com, kernel@wantstofly.org
Subject: Re: [RFC PATCH v0 1/2] net: bridge: propagate FDB table into hardware
Date: Tue, 28 Feb 2012 21:14:40 -0800 [thread overview]
Message-ID: <4F4DB440.50509@intel.com> (raw)
In-Reply-To: <4F4DAC26.4050108@intel.com>
On 2/28/2012 8:40 PM, John Fastabend wrote:
> On 2/18/2012 4:41 AM, jamal wrote:
>> On Fri, 2012-02-17 at 09:10 -0800, John Fastabend wrote:
>>
>>> Yes I agree that is the goal.
>>>
>>>> One last comment:
>>>> With synchronization there are other challenges when the entry in the
>>>> hardware conflicts with the entry in software when you intend the
>>>> behavior to be the same. This is not such a big deal with bridging but
>>>> becomes more apparent when you start offloading ACLs etc.
>>>>
>>>
>>> OK and these sorts of conflicts certainly don't need to be resolved
>>> by kernel code. So I think this is a reasonable reason to drive the
>>> synchronization into a user space daemon.
>>
>>
>> Yep.
>> Thanks for listening John. Waiting to see them patches.
>>
>> cheers,
>> jamal
>>
>>
>>
>
> +Lennert
>
> OK back to this. The last piece is where to put these messages...
> we could take PF_ROUTE:RTM_*NEIGH
>
> PF_ROUTE:RTM_NEWNEIGH - Add a new FDB entry to an offloaded
> switch.
> PF_ROUTE:RTM_DELNEIGH - Delete a FDB entry from an offlaoded
> switch.
> PF_ROUTE:RTM_GETNEIGH - Dumps the embedded FDB table
>
> The neighbor code is using the PF_UNSPEC protocol type so we won't
> collide with these unless someone was using PF_ROUTE and relying on
> falling back to PF_UNSPEC however I couldn't find any programs that
> did this iproute2 certainly doesn't. And the bridge pieces are using
> PF_BRIDGE so no collision there.
>
> I briefly thought about trying to pull the PF_BRIDGE protocol out
> and use this for both types but I think its better to leave the
> bridge code alone and there is also the issue of disambiguating a msg
> at a port which has both an embedded switch and has SW bridge for a
> master.
Maybe I gave up too quickly here I could use a bit in the ndm_flags to
specify embedded or sw bridge. But would require having the bridge
module loaded.
>
> Also if there are embedded switches with learning capabilities they
> might want to trigger events to user space. In this case having
> a protocol type makes user space a bit easier to manage. I've
> added Lennert so maybe he can comment I think the Marvell chipsets
> might support something along these lines. The SR-IOV chipsets I'm
> aware of _today_ don't do learning. Learning makes the event model
> more plausible.
>
Just checked looks like the DSA infrastructure has commands to enable
STP so guess it is doing learning.
> The other mechanism would be to embed some more attributes into the
> PF_UNSPEC:RTM_XXXLINK msg however I'm thinking that if we want to
> support learning and triggering events then we likely also don't
> want to send these events to every app with RTNLGRP_LINK set.
>
> Plus there is already a proliferation of LINK attributes and dumping
> the FDB out of this seems a bit much but could be done with some
> bitmasks. Although the current ext_filter_mask u32 doesn't seem to
> be sufficient for events to trigger this.
>
> so much for a short note...
>
> Thanks
> .John
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-02-29 5:14 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-09 3:22 [RFC PATCH v0 1/2] net: bridge: propagate FDB table into hardware John Fastabend
2012-02-09 3:22 ` [RFC PATCH v0 2/2] ixgbe: add NETIF_F_HW_FDB to supported flags John Fastabend
2012-02-09 4:36 ` [RFC PATCH v0 1/2] net: bridge: propagate FDB table into hardware Stephen Hemminger
2012-02-09 17:36 ` John Fastabend
2012-02-09 17:40 ` Stephen Hemminger
2012-02-09 17:52 ` John Fastabend
2012-02-09 21:11 ` jamal
2012-02-10 2:14 ` John Fastabend
2012-02-10 4:14 ` John Fastabend
2012-02-10 15:18 ` jamal
2012-02-10 16:39 ` Stephen Hemminger
2012-02-13 13:54 ` jamal
2012-02-13 15:13 ` John Fastabend
2012-02-14 13:18 ` jamal
2012-02-14 18:57 ` John Fastabend
2012-02-14 19:05 ` Stephen Hemminger
2012-02-14 19:08 ` John Fastabend
2012-02-15 14:10 ` Jamal Hadi Salim
2012-02-16 1:26 ` John Fastabend
2012-02-17 14:28 ` jamal
2012-02-17 17:10 ` John Fastabend
2012-02-18 12:41 ` jamal
2012-02-29 4:40 ` John Fastabend
2012-02-29 5:14 ` John Fastabend [this message]
2012-02-29 13:57 ` Jamal Hadi Salim
2012-02-29 13:56 ` Jamal Hadi Salim
2012-02-29 17:25 ` John Fastabend
2012-02-29 17:52 ` Stephen Hemminger
2012-02-29 18:19 ` John Fastabend
2012-03-01 13:36 ` Jamal Hadi Salim
2012-03-01 22:17 ` John Fastabend
2012-03-02 13:20 ` jamal
2012-03-05 17:00 ` Lennert Buytenhek
2012-03-01 13:24 ` Jamal Hadi Salim
2012-03-01 14:14 ` Michael S. Tsirkin
2012-03-01 22:10 ` John Fastabend
2012-03-05 16:53 ` Lennert Buytenhek
2012-03-06 3:45 ` John Fastabend
2012-03-06 14:15 ` Lennert Buytenhek
2012-03-06 13:42 ` jamal
2012-03-06 14:09 ` Lennert Buytenhek
2012-03-07 14:11 ` Jamal Hadi Salim
2012-03-12 8:48 ` Lennert Buytenhek
2012-03-13 13:52 ` Jamal Hadi Salim
2012-02-16 3:58 ` Ben Hutchings
2012-02-16 19:18 ` Shradha Shah
2012-02-17 14:37 ` jamal
2012-02-10 13:45 ` Roopa Prabhu
2012-02-09 18:14 ` Sridhar Samudrala
2012-02-09 20:30 ` John Fastabend
2012-02-10 0:39 ` Sridhar Samudrala
2012-02-10 0:51 ` John Fastabend
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F4DB440.50509@intel.com \
--to=john.r.fastabend@intel.com \
--cc=bhutchings@solarflare.com \
--cc=chrisw@redhat.com \
--cc=davem@davemloft.net \
--cc=gregory.v.rose@intel.com \
--cc=hadi@cyberus.ca \
--cc=jhs@mojatatu.com \
--cc=kernel@wantstofly.org \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=roprabhu@cisco.com \
--cc=shemminger@vyatta.com \
--cc=sri@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.