From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [RFC 1/2] ath9k: use ieee80211_free_txskb
Date: Thu, 1 Mar 2012 11:09:15 +0530 [thread overview]
Message-ID: <4F4F0B83.9050203@qca.qualcomm.com> (raw)
In-Reply-To: <d053a9a1ec34c2e1b15cf50b272ba7863fb17088.1330360738.git.chunkeey@googlemail.com>
Hi Christian,
On Monday 27 February 2012 09:40 PM, Christian Lamparter wrote:
> With the new tx status API: "mac80211: implement wifi TX status"
> All skb originating from mac80211 needs to be given back to mac80211.
>
> Signed-off-by: Christian Lamparter<chunkeey@googlemail.com>
> ---
> It's high time we change all calls in the tx-path from
> dev_kfree_skb into ieee80211_free_txskb.
>
> The call in ath9k_tx is straightforward, but the one in
> ath_tx_setup_buffer gives me headaches. I'm not sure if
> we even need to check bf->bf_state.bfs_paprd at this
> stage since ath_tx_start_dma sets bf->bf_state.bfs_paprd
> "after" calling ath_tx_setup_buffer?!
yes, i think its a problem, we cannot exactly say its the skb from
mac80211 (or) its our PAPRD skb. though with the current code(as the
PAPRD) is disabled the skb would be always from mac80211. let us see if
we have some good solution.
>
> Regards,
> Chr
> ---
> drivers/net/wireless/ath/ath9k/main.c | 2 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 6 +++++-
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> index c81304d..4471ed9 100644
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -1162,7 +1162,7 @@ static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
>
> return;
> exit:
> - dev_kfree_skb_any(skb);
> + ieee80211_free_txskb(sc->hw, skb);
> }
>
> static void ath9k_stop(struct ieee80211_hw *hw)
> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
> index 3182408..0dadbc3 100644
> --- a/drivers/net/wireless/ath/ath9k/xmit.c
> +++ b/drivers/net/wireless/ath/ath9k/xmit.c
> @@ -1858,7 +1858,11 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
> return bf;
>
> error:
> - dev_kfree_skb_any(skb);
> +
> + if (bf->bf_state.bfs_paprd)
> + dev_kfree_skb_any(skb);
> + else
> + ieee80211_free_txskb(sc->hw, skb);
> return NULL;
> }
>
--
thanks,
shafi
WARNING: multiple messages have this Message-ID (diff)
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
To: Christian Lamparter <chunkeey@googlemail.com>
Cc: <linux-wireless@vger.kernel.org>, <ath9k-devel@lists.ath9k.org>,
<senthilb@qca.qualcomm.com>, <vthiagar@qca.qualcomm.com>,
<rodrigue@qca.qualcomm.com>,
Rajkumar_contact <rmanohar@qca.qualcomm.com>,
"Manoharan, Sujith" <c_manoha@qca.qualcomm.com>
Subject: Re: [RFC 1/2] ath9k: use ieee80211_free_txskb
Date: Thu, 1 Mar 2012 11:09:15 +0530 [thread overview]
Message-ID: <4F4F0B83.9050203@qca.qualcomm.com> (raw)
In-Reply-To: <d053a9a1ec34c2e1b15cf50b272ba7863fb17088.1330360738.git.chunkeey@googlemail.com>
Hi Christian,
On Monday 27 February 2012 09:40 PM, Christian Lamparter wrote:
> With the new tx status API: "mac80211: implement wifi TX status"
> All skb originating from mac80211 needs to be given back to mac80211.
>
> Signed-off-by: Christian Lamparter<chunkeey@googlemail.com>
> ---
> It's high time we change all calls in the tx-path from
> dev_kfree_skb into ieee80211_free_txskb.
>
> The call in ath9k_tx is straightforward, but the one in
> ath_tx_setup_buffer gives me headaches. I'm not sure if
> we even need to check bf->bf_state.bfs_paprd at this
> stage since ath_tx_start_dma sets bf->bf_state.bfs_paprd
> "after" calling ath_tx_setup_buffer?!
yes, i think its a problem, we cannot exactly say its the skb from
mac80211 (or) its our PAPRD skb. though with the current code(as the
PAPRD) is disabled the skb would be always from mac80211. let us see if
we have some good solution.
>
> Regards,
> Chr
> ---
> drivers/net/wireless/ath/ath9k/main.c | 2 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 6 +++++-
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> index c81304d..4471ed9 100644
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -1162,7 +1162,7 @@ static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
>
> return;
> exit:
> - dev_kfree_skb_any(skb);
> + ieee80211_free_txskb(sc->hw, skb);
> }
>
> static void ath9k_stop(struct ieee80211_hw *hw)
> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
> index 3182408..0dadbc3 100644
> --- a/drivers/net/wireless/ath/ath9k/xmit.c
> +++ b/drivers/net/wireless/ath/ath9k/xmit.c
> @@ -1858,7 +1858,11 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
> return bf;
>
> error:
> - dev_kfree_skb_any(skb);
> +
> + if (bf->bf_state.bfs_paprd)
> + dev_kfree_skb_any(skb);
> + else
> + ieee80211_free_txskb(sc->hw, skb);
> return NULL;
> }
>
--
thanks,
shafi
next prev parent reply other threads:[~2012-03-01 5:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-27 16:10 [ath9k-devel] [RFC 1/2] ath9k: use ieee80211_free_txskb Christian Lamparter
2012-02-27 16:10 ` Christian Lamparter
2012-02-27 16:32 ` [ath9k-devel] [RFC 2/2] ath9k_htc: " Christian Lamparter
2012-02-27 16:32 ` Christian Lamparter
2012-03-01 13:58 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-01 13:58 ` Mohammed Shafi Shajakhan
2012-03-01 5:39 ` Mohammed Shafi Shajakhan [this message]
2012-03-01 5:39 ` [RFC 1/2] ath9k: " Mohammed Shafi Shajakhan
2012-03-01 11:42 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-01 11:42 ` Mohammed Shafi Shajakhan
2012-03-01 13:46 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-01 13:46 ` Mohammed Shafi Shajakhan
2012-03-05 15:00 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-05 15:00 ` Mohammed Shafi Shajakhan
2012-03-05 15:01 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-05 15:01 ` Mohammed Shafi Shajakhan
2012-03-05 18:43 ` [ath9k-devel] " Christian Lamparter
2012-03-05 18:43 ` Christian Lamparter
2012-03-06 5:06 ` [ath9k-devel] " Mohammed Shafi Shajakhan
2012-03-06 5:06 ` Mohammed Shafi Shajakhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F4F0B83.9050203@qca.qualcomm.com \
--to=mohammed@qca.qualcomm.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.