Re: Problems with wl1271

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Gary Thomas <gary@mlbassoc.com>
To: Luciano Coelho <coelho@ti.com>
Cc: Linux Wireless <linux-wireless@vger.kernel.org>
Subject: Re: Problems with wl1271
Date: Thu, 01 Mar 2012 05:10:59 -0700	[thread overview]
Message-ID: <4F4F6753.5020409@mlbassoc.com> (raw)
In-Reply-To: <1330602450.18637.160.camel@cumari>

[-- Attachment #1: Type: text/plain, Size: 2605 bytes --]

On 2012-03-01 04:47, Luciano Coelho wrote:
> On Thu, 2012-03-01 at 04:35 -0700, Gary Thomas wrote:
>> On 2012-02-29 13:53, Gary Thomas wrote:
>>> I'm trying to bring up a new hardware platform which includes
>>> the TiWi-r02 (wl1271). Since the kernel for my target device
>>> (AM3874) is stuck in the dark ages, Luciano suggested that I
>>> try compat-wireless + iw. I've managed to build these now
>>> (after encountering many problems that I'll help iron out later)
>>> and now have the system ready to start using the device. Note:
>>> I'm using compat-wireless-2012-02-28 and iw-3.2
>>>
>>> The kernel modules load and initialize now, with these messages:
>
> [...]
>
>>> wl12xx: loaded
>>>
>>> When I try to bring up the device, I get this:
>>> # ifconfig wlan0 hw ether 2a:00:24:01:02:03
>>> # ifconfig wlan0 up
>>> wl12xx: firmware booted (Rev 6.3.5.0.98)
>>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>
>>> If I try to scan for an access point, I get nothing:
>>> # iw wlan0 scan
>>> --- Nothing prints
>>> #
>>> I also see no additional messages in dmesg.
>>>
>>> Further checking of the device:
>
> [...]
>
>>> I don't know enough about this device to understand why it's not working.
>>> Perhaps the line
>>> Available Antennas: TX 0 RX 0
>>> is a clue?
>>>
>>> Any ideas what's not working&  how I need to do to move forward?
>>>
>>> Thanks in advance for all the help
>>>
>>
>> Any ideas at all?  Is there some debug info I can get to find
>> out what's going on?
>>
>> Note: I compared the output of 'iw list' from my non-functional system
>> to that of a working one (OMAP4430 PandaBoard) and they are virtually
>> identical, even the line about the antenna...
>
> Yes, all this looks normal.  Try to enable some debugging in the driver.
> You need to enable the dynamic debugging in your kernel config (if you
> don't have it yet) and do something like this:
>
> echo "module wl12xx +p">  /sys/kernel/debug/dynamic_debug/control
> echo 0x101>  /sys/module/wlcore/parameters/debug_level
>
> The 0x101 value enables IRQ and SCAN debug prints.  You can see more
> options in drivers/net/wireless/wl12xx/debug.h.
>
> Please try to scan with this debugging level and send me what you get.
>

Results attached.  It looks like it does see something on channel 11 (2462MHz)
which is correct - I have a router sitting about 2m from the unit operating
on channel 11.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

[-- Attachment #2: iw.debug --]
[-- Type: text/plain, Size: 18585 bytes --]

PM: Adding info for platform:wl12xx
Compat-wireless backport release: compat-wireless-2012-02-28
Backport based on linux-next.git next-20120228
PM: Adding info for platform:regulatory.0
cfg80211: Calling CRDA to update world regulatory domain
PM: Adding info for No Bus:wl12xx
PM: Removing info for No Bus:wl12xx
PM: Adding info for No Bus:phy0
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Disabling freq 5035 MHz
cfg80211: Disabling freq 5040 MHz
cfg80211: Disabling freq 5045 MHz
cfg80211: Disabling freq 5055 MHz
cfg80211: Disabling freq 5060 MHz
cfg80211: Disabling freq 5080 MHz
cfg80211: Disabling freq 5170 MHz
cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Disabling freq 5260 MHz
cfg80211: Disabling freq 5280 MHz
cfg80211: Disabling freq 5300 MHz
cfg80211: Disabling freq 5320 MHz
cfg80211: Disabling freq 5500 MHz
cfg80211: Disabling freq 5520 MHz
cfg80211: Disabling freq 5540 MHz
cfg80211: Disabling freq 5560 MHz
cfg80211: Disabling freq 5580 MHz
cfg80211: Disabling freq 5600 MHz
cfg80211: Disabling freq 5620 MHz
cfg80211: Disabling freq 5640 MHz
cfg80211: Disabling freq 5660 MHz
cfg80211: Disabling freq 5680 MHz
cfg80211: Disabling freq 5700 MHz
cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
PM: Adding info for No Bus:wlan0
wl12xx: loaded
NET: Registered protocol family 10

CPSW phy found : id is : 0x1410e11
PHY 0:01 not found
ADDRCONF(NETDEV_UP): eth0: link is not ready
PHY: 0:00 - Link is Up - 100/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
PM: Adding info for No Bus:wl12xx
PM: Removing info for No Bus:wl12xx
wl12xx: IRQ
wl12xx: firmware booted (Rev 6.3.5.0.98)
ieee80211 phy0: device now idle
wl12xx: IRQ work
wl12xx: intr: 0x20 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wl12xx: IRQ
wl12xx: band 0, center_freq 2412 
wl12xx: hw_value 1, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2417 
wl12xx: hw_value 2, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2422 
wl12xx: hw_value 3, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2427 
wl12xx: hw_value 4, flags 20
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2432 
wl12xx: hw_value 5, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2437 
wl12xx: hw_value 6, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2442 
wl12xx: hw_value 7, flags 0
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2447 
wl12xx: hw_value 8, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2452 
wl12xx: hw_value 9, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2457 
wl12xx: hw_value 10, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2462 
wl12xx: hw_value 11, flags 10
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 02 04 0b 16
wl12xx: PROBE REQ: 00000020: 0c 12 18 24 32 04 30 48 60 6c 2d 1a 30 01 18 ff
wl12xx: PROBE REQ: 00000030: 00 00 00 00 00 00 00 00 00 48 00 01 00 00 00 00
wl12xx: PROBE REQ: 00000040: 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 02 00 00 0b 02 1f 00 00 01 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 00 01 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 01 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 02 00 00 00 4c 1d 00 00
wl12xx: SCAN: 00000060: 30 75 00 00 ff ff ff ff ff ff 00 14 03 00 00 00
wl12xx: SCAN: 00000070: 4c 1d 00 00 30 75 00 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000080: 04 00 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 00000090: ff ff 00 14 05 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 000000a0: ff ff ff ff ff ff 00 14 06 00 00 00 4c 1d 00 00
wl12xx: SCAN: 000000b0: 30 75 00 00 ff ff ff ff ff ff 00 14 07 00 00 00
wl12xx: SCAN: 000000c0: 4c 1d 00 00 30 75 00 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 000000d0: 08 00 00 00 4c 1d 00 00 30 75 00 00 ff ff ff ff
wl12xx: SCAN: 000000e0: ff ff 00 14 09 00 00 00 4c 1d 00 00 30 75 00 00
wl12xx: SCAN: 000000f0: ff ff ff ff ff ff 00 14 0a 00 00 00 4c 1d 00 00
wl12xx: SCAN: 00000100: 30 75 00 00 ff ff ff ff ff ff 00 14 0b 00 00 00
wl12xx: SCAN: 00000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: IRQ work
wl12xx: intr: 0x20 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x24 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_A
wl12xx: band 0, center_freq 2467 
wl12xx: hw_value 12, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2472 
wl12xx: hw_value 13, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 0, center_freq 2484 
wl12xx: hw_value 14, flags 36
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 02 04 0b 16
wl12xx: PROBE REQ: 00000020: 0c 12 18 24 32 04 30 48 60 6c 2d 1a 30 01 18 ff
wl12xx: PROBE REQ: 00000030: 00 00 00 00 00 00 00 00 00 48 00 01 00 00 00 00
wl12xx: PROBE REQ: 00000040: 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 03 00 00 03 02 1f 00 00 01 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 00 01 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 0c 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 0d 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000060: a0 86 01 00 ff ff ff ff ff ff 00 14 0e 00 00 00
wl12xx: SCAN: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x28 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_B
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE
wl12xx: Scanning complete
wl12xx: band 1, center_freq 5180 
wl12xx: hw_value 36, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5190 
wl12xx: hw_value 38, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5200 
wl12xx: hw_value 40, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5210 
wl12xx: hw_value 42, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5220 
wl12xx: hw_value 44, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5230 
wl12xx: hw_value 46, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5240 
wl12xx: hw_value 48, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5745 
wl12xx: hw_value 149, flags 26
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5765 
wl12xx: hw_value 153, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5785 
wl12xx: hw_value 157, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5805 
wl12xx: hw_value 161, flags 6
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: band 1, center_freq 5825 
wl12xx: hw_value 165, flags 16
wl12xx: max_antenna_gain 0, max_power 20
wl12xx: beacon_found 0
wl12xx: PROBE REQ: 00000000: 40 00 00 00 ff ff ff ff ff ff 2a 00 24 01 02 03
wl12xx: PROBE REQ: 00000010: ff ff ff ff ff ff 00 00 00 00 01 08 0c 12 18 24
wl12xx: PROBE REQ: 00000020: 30 48 60 6c 2d 1a 30 01 18 ff 00 00 00 00 00 00
wl12xx: PROBE REQ: 00000030: 00 00 00 48 00 01 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000000: 00 00 00 00 03 00 00 0c 02 1f 00 00 08 00 00 00
wl12xx: SCAN: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000030: 01 01 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000040: ff ff 00 14 24 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 00000050: ff ff ff ff ff ff 00 14 26 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000060: a0 86 01 00 ff ff ff ff ff ff 00 14 28 00 00 00
wl12xx: SCAN: 00000070: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000080: 2a 00 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 00000090: ff ff 00 14 2c 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 000000a0: ff ff ff ff ff ff 00 14 2e 00 00 00 a0 86 01 00
wl12xx: SCAN: 000000b0: a0 86 01 00 ff ff ff ff ff ff 00 14 30 00 00 00
wl12xx: SCAN: 000000c0: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 000000d0: 95 00 00 00 a0 86 01 00 a0 86 01 00 ff ff ff ff
wl12xx: SCAN: 000000e0: ff ff 00 14 99 00 00 00 a0 86 01 00 a0 86 01 00
wl12xx: SCAN: 000000f0: ff ff ff ff ff ff 00 14 9d 00 00 00 a0 86 01 00
wl12xx: SCAN: 00000100: a0 86 01 00 ff ff ff ff ff ff 00 14 a1 00 00 00
wl12xx: SCAN: 00000110: a0 86 01 00 a0 86 01 00 ff ff ff ff ff ff 00 14
wl12xx: SCAN: 00000120: a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wl12xx: SCAN: 00000210: 00 00 00 00 2a 00 24 01 02 03 00 00
wl12xx: IRQ
wl12xx: IRQ work
wl12xx: intr: 0x24 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
wl12xx: WL1271_ACX_INTR_EVENT_A
wl12xx: Scanning complete
wl12xx: WL1271_ACX_INTR_HW_AVAILABLE

next prev parent reply	other threads:[~2012-03-01 12:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-29 20:53 Problems with wl1271 Gary Thomas
2012-03-01 11:35 ` Gary Thomas
2012-03-01 11:47   ` Luciano Coelho
2012-03-01 12:10     ` Gary Thomas [this message]
2012-03-01 12:13 ` Ohad Ben-Cohen
2012-03-01 12:28   ` Gary Thomas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F4F6753.5020409@mlbassoc.com \
    --to=gary@mlbassoc.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.