From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boszormenyi Zoltan Subject: radeon.pcie_gen2=1 unusable with AMD 990X chipset Date: Mon, 05 Mar 2012 11:58:10 +0100 Message-ID: <4F549C42.1020003@pr.hu> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail.pr.hu (mail.pr.hu [87.242.0.5]) by gabe.freedesktop.org (Postfix) with ESMTP id E8DEA9E7CE for ; Mon, 5 Mar 2012 04:18:47 -0800 (PST) Received: from host-87-242-59-39.prtelecom.hu ([87.242.59.39] helo=localhost.localdomain) by mail.pr.hu with esmtpsa (TLS1.0:DHE_RSA_AES_256_CBC_SHA1:32) (Exim 4.69) (envelope-from ) id 1S4VcB-0006SZ-R5 for dri-devel@lists.freedesktop.org; Mon, 05 Mar 2012 11:58:14 +0100 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org Errors-To: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org To: DRI Development List-Id: dri-devel@lists.freedesktop.org Hi, last week I bought a new ASUS M5A99X EVO AM3+ mainboard. It supports PCIe 2.0. I also have a Radeon 6570 videocard (PCIe 2.0) and a 3ware 9650SE 8LPML RAID card (PCIe 1.0). There are 3 PCIe x16 slots on the mainboard, two of them share x16 wiring so single card x16 or dual card x8/x8 is possible. The 3rd slot is PCIe x16 slot with dedicated x4 wiring, no sharing with the first 2 slot= s. The RAID card is sitting in the 3rd slot. I am running Fedora 16 with the latest 3.2.7-1.fc16.x86_64 kernel. I have set radeon.pcie_gen2=3D1 in grub2 config to test PCIe 2.0 speed with the videocard. It reliably locks up on boot. As a result, the mainboard gets confused so much that it needs CMOS clear, otherwise even after hard reset it cannot boot up successfully. I tried it a couple of times, the symptoms (without CMOS clear) are mysteriously different. From the few attempts, I experienced these: - the mainboard reports faulty videocard, no image on display - the mainboard passes the videocard test but reports faulty boot drive (I guess it cannot initialize the RAID card as it's the primary boot driv= e) and still no image on display - the first few screens appear on the display but e.g. the onboard SATA controller cannot find the DVD drive and the BIOS initialization sequence stops somewhere, it doesn't reach the GRUB menu The motherboard has an AMD 990X chipset. Without radeon.pcie_gen2=3D1, the system works and is stable. I don't know what to blame. The chipset, BIOS bugs, or the mix of PCIe 1.0 and 2.0 devices. Anyway, I thought it would be an interesting detail for Radeon developers. Best regards, Zolt=E1n B=F6sz=F6rm=E9nyi