From mboxrd@z Thu Jan 1 00:00:00 1970 From: Danilo Godec Subject: Re: Raid failure - drives or controller? Date: Wed, 07 Mar 2012 22:15:29 +0100 Message-ID: <4F57CFF1.8040005@agenda.si> References: <4F57A05E.6000204@agenda.si> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-raid-owner@vger.kernel.org To: =?UTF-8?B?TWF0aGlhcyBCdXLDqW4=?= Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On 7.3.2012 22:11, Mathias Bur=C3=A9n wrote: > > Can you please post the smartctl -a (from smartmontools) output for b= oth drives? > > Mathias > -- # smartctl -a /dev/sde > smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE= RPM) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforg= e.net > > Device: WDC WD1002FBYS-02A6B Version: 0C06 > Serial number: WD-WMATV6536667 > Device type: disk > scsiModePageOffset: response length too short, resp_len=3D12 offset=3D= 12 > bd_len=3D8 > Local Time is: Wed Mar 7 22:13:35 2012 CET > Device does not support SMART > > Current Drive Temperature: > > Error Counter logging not supported > > [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S= on'] > > SMART Self-test log > Num Test Status segment LifeTime=20 > LBA_first_err [SK ASC ASQ] > Description number (hours) > #256 Default Completed - =20 > 12946 - [- - -] > #512 Default Completed - =20 > 12946 - [- - -] > #768 Default Completed - =20 > 554 - [- - -] # smartctl -a /dev/sdg > smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE= RPM) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforg= e.net > > Device: WDC WD1002FBYS-02A6B Version: 0C06 > Serial number: WD-WMATV6535018 > Device type: disk > scsiModePageOffset: response length too short, resp_len=3D12 offset=3D= 12 > bd_len=3D8 > Local Time is: Wed Mar 7 22:13:40 2012 CET > Device does not support SMART > > Current Drive Temperature: > > Error Counter logging not supported > > [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S= on'] > > SMART Self-test log > Num Test Status segment LifeTime=20 > LBA_first_err [SK ASC ASQ] > Description number (hours) > #256 Default Completed - =20 > 1359 - [- - -] > #512 Default Completed - =20 > 1040 - [- - -] > #768 Default Completed - =20 > 581 - [- - -] Thanks, Danilo -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html