From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Date: Wed, 07 Mar 2012 13:17:15 -0800 Subject: [ath9k-devel] Low speeds when AP is very close to stations. Message-ID: <4F57D05B.2070806@candelatech.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org I put two ath9k (AR9300) nics in one machine, with 6 antenna poking out, and had one NIC be the AP for the other. It works, but I'm seeing lots of CRC errors and station-to-station throughput is only about 5Mbps (one sending to the other). I tried setting xmit power lower (to 4, for instance), but that doesn't change the behaviour much. Any suggestions for other tricks that might make this work better? Here's the lspci info for my adapters: 03:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) 04:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com