From: Yan Seiner <yan@seiner.com>
To: linux-media@vger.kernel.org
Subject: Re: saa7115: black image
Date: Sun, 11 Mar 2012 11:10:14 -0700 [thread overview]
Message-ID: <4F5CEA86.50202@seiner.com> (raw)
In-Reply-To: <4F5CE40C.6040706@seiner.com>
Yan Seiner wrote:
> I have an embedded platform with a Hauppage USB Live video capture
> dongle. I recently upgraded to 3.0.12 and now I get no image at all -
> a nice pure black is all I get.
>
> I am sure that the dongle is getting a signal. This same hardware
> used to work with an older 2.6 kernel.
>
> Partial lsmod:
>
> root@anchor:/etc# lsmod
> Module Size Used by Not tainted
> saa7115 11296 0
> usbvision 48704 0
> v4l2_common 4336 2 saa7115,usbvision
> videodev 62768 3 saa7115,usbvision,v4l2_common
> i2c_core 12240 5
> saa7115,usbvision,v4l2_common,videodev,i2c_dev
>
> [ 33.640000] usbcore: registered new interface driver usb-storage
> [ 33.644000] USB Mass Storage support registered.
> [ 33.708000] Linux video capture interface: v2.00
> [ 34.084000] usbvision_probe: Hauppauge WinTV USB Live Pro (NTSC
> M/N) found
> [ 34.092000] USBVision[0]: registered USBVision Video device video0
> [v4l2]
> [ 34.100000] usbcore: registered new interface driver usbvision
> [ 34.104000] USBVision USB Video Device Driver for Linux : 0.9.10
>
> and this shows up every time the device is opened:
>
> [ 219.772000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a
> (usbvision-3-1)
>
> I can't help but think I am missing a module, or firmware, or
> something.... But with no messages to go on it's a bit of a mystery.
>
> And yes, I've tried different inputs on the dongle; 0 is the composite
> in and 1 is the s-video. I'm using input 0.
>
Here's the verbose capture using fswebcam:
root@anchor:/lib/modules/3.0.12# fswebcam -v -c /etc/fswebcam
Reading configuration from '/etc/fswebcam'...
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
src_v4l2_get_capability,83: /dev/video0 information:
src_v4l2_get_capability,84: cap.driver: "USBVision"
src_v4l2_get_capability,85: cap.card: "Hauppauge WinTV USB Live Pro (N"
src_v4l2_get_capability,86: cap.bus_info: "usb-0000:00:02.1-1"
src_v4l2_get_capability,87: cap.capabilities=0x05020001
src_v4l2_get_capability,88: - VIDEO_CAPTURE
src_v4l2_get_capability,95: - AUDIO
src_v4l2_get_capability,97: - READWRITE
src_v4l2_get_capability,99: - STREAMING
src_v4l2_set_input,177: /dev/video0: Input 0 information:
src_v4l2_set_input,178: name = "Composite Video Input"
src_v4l2_set_input,179: type = 00000002
src_v4l2_set_input,181: - CAMERA
src_v4l2_set_input,182: audioset = 00000000
src_v4l2_set_input,183: tuner = 00000000
src_v4l2_set_input,184: status = 00000000
src_v4l2_set_pix_format,537: Device offers the following V4L2 pixel formats:
src_v4l2_set_pix_format,550: 0: [0x59455247] 'GREY' (GREY)
src_v4l2_set_pix_format,550: 1: [0x50424752] 'RGBP' (RGB565)
src_v4l2_set_pix_format,550: 2: [0x33424752] 'RGB3' (RGB24)
src_v4l2_set_pix_format,550: 3: [0x34424752] 'RGB4' (RGB32)
src_v4l2_set_pix_format,550: 4: [0x4F424752] 'RGBO' (RGB555)
src_v4l2_set_pix_format,550: 5: [0x56595559] 'YUYV' (YUV422)
src_v4l2_set_pix_format,550: 6: [0x32315659] 'YV12' (YUV420P)
Using palette RGB32
Delaying 1 seconds.
src_v4l2_set_mmap,689: mmap information:
src_v4l2_set_mmap,690: frames=3
src_v4l2_set_mmap,737: 0 length=307200
src_v4l2_set_mmap,737: 1 length=307200
src_v4l2_set_mmap,737: 2 length=307200
--- Capturing frame...
Skipping 5 frames...
Capturing 1 frames...
Captured 6 frames in 0.21 seconds. (28 fps)
--- Processing captured image...
Setting font to LiberationSans-Regular:10.
Setting output format to JPEG, quality 95
Writing JPEG image to '/tmp/.tmp.jpg'.
root@anchor:/lib/modules/3.0.12#
--
Honoring our vets.
http://www.bataanmarch.com/
next prev parent reply other threads:[~2012-03-11 18:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-11 17:42 saa7115: black image Yan Seiner
2012-03-11 18:10 ` Yan Seiner [this message]
2012-03-12 1:01 ` Yan Seiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F5CEA86.50202@seiner.com \
--to=yan@seiner.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.