From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chanwoo Choi Subject: [PATCH v3 0/2] input: add MAX8997-haptic driver Date: Mon, 12 Mar 2012 17:31:17 +0900 Message-ID: <4F5DB455.1080907@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from mailout4.samsung.com ([203.254.224.34]:36943 "EHLO mailout4.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752626Ab2CLIbU (ORCPT ); Mon, 12 Mar 2012 04:31:20 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: linux-input@vger.kernel.org, Dmitry Torokhov Cc: sameo@linux.intel.com, broonie@opensource.wolfsonmicro.com, linux-kernel@vger.kernel.org, kyungmin.park@samsung.com, myungjoo.ham@samsung.com MAX8997 has several features in a single chip, This patchset supports unimplemented haptic driver of MAX8997. This patchset tested on TRATS board based on EXYNOS4210. v2 - code clean and remove unnecessary code according to comment of Dmitry Torokhov v3 - use work_struct to enable/disable max8997-haptic instead of using mutex in irq handler statck of forced feedbacky Donggeun Kim (2): mfd: add platform data for MAX8997 haptic driver input: add driver support for MAX8997-haptic drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/max8997_haptic.c | 377 +++++++++++++++++++++++++++++++++++ include/linux/mfd/max8997.h | 53 +++++- 4 files changed, 442 insertions(+), 1 deletions(-) create mode 100644 drivers/input/misc/max8997_haptic.c