[PATCH 08/10] ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree

[lee.jones@linaro.org (Lee Jones)]

On 14/03/12 15:00, Rob Herring wrote:
> On 03/14/2012 08:05 AM, Lee Jones wrote:
>> Enables the 3 UARTs found on a u8500 using DT.
>>
>> Signed-off-by: Lee Jones <lee.jones@linaro.org>
>> ---
>>  arch/arm/boot/dts/db8500.dtsi      |    6 +++---
>>  arch/arm/boot/dts/snowball.dts     |   12 ++++++++++++
>>  arch/arm/mach-ux500/board-mop500.c |    4 +++-
>>  3 files changed, 18 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
>> index 35d0146..9b5e06e 100644
>> --- a/arch/arm/boot/dts/db8500.dtsi
>> +++ b/arch/arm/boot/dts/db8500.dtsi
>> @@ -208,19 +208,19 @@
>>  		uart at 80120000 {
>>  			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x80120000 0x1000>;
>> -			interrupts = <11>;
>> +			interrupts = <0 11 0x4>;
>>  			status = "disabled";
>>  		};
>>  		uart at 80121000 {
>>  			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x80121000 0x1000>;
>> -			interrupts = <19>;
>> +			interrupts = <0 19 0x4>;
>>  			status = "disabled";
>>  		};
>>  		uart at 80007000 {
>>  			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x80007000 0x1000>;
>> -			interrupts = <26>;
>> +			interrupts = <0 26 0x4>;
>>  			status = "disabled";
>>  		};
>>  
>> diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
>> index 34bfd79..359c6d6 100644
>> --- a/arch/arm/boot/dts/snowball.dts
>> +++ b/arch/arm/boot/dts/snowball.dts
>> @@ -96,6 +96,18 @@
>>  			status = "enabled";
>>  		};
>>  
>> +		uart at 80120000 {
>> +			status = "okay";
>> +		};
>> +
>> +		uart at 80121000 {
>> +			status = "okay";
>> +		};
>> +
>> +		uart at 80007000 {
>> +			status = "okay";
>> +		};
>> +
>>  		i2c at 80004000 {
>>  			tc3589x at 42 {
>>  				//compatible = "tc3589x";
>> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
>> index 482b86e..ea0242a 100644
>> --- a/arch/arm/mach-ux500/board-mop500.c
>> +++ b/arch/arm/mach-ux500/board-mop500.c
>> @@ -746,6 +746,9 @@ MACHINE_END
>>  #ifdef CONFIG_MACH_UX500_DT
>>  
>>  struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
>> +	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
>> +	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
>> +	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
> 
> Unless I'm blind, the pl011 driver doesn't take any platform data.

I guess you must be blind then? =:-)

linux/amba/serial.h:

struct amba_pl011_data {
        bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
        void *dma_rx_param;
        void *dma_tx_param;
        void (*init) (void);
        void (*exit) (void);
        void (*reset) (void);
};

>>  	{},
>>  };
>>  
>> @@ -802,7 +805,6 @@ static void __init u8500_init_machine(void)
>>  	}
>>  	mop500_i2c_init(parent);
>>  	mop500_spi_init(parent);
>> -	mop500_uart_init(parent);
>>  
>>  	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
>>  	i2c_register_board_info(2, mop500_i2c2_devices,
> 


-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
M: +44 77 88 633 515
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog