From: Jack Mitchell <ml@communistcode.co.uk>
To: openembedded-core@lists.openembedded.org
Subject: Re: cpufrequtils do_install issue
Date: Thu, 15 Mar 2012 10:35:11 +0000 [thread overview]
Message-ID: <4F61C5DF.8090705@communistcode.co.uk> (raw)
In-Reply-To: <4F4B890D.90809@communistcode.co.uk>
[-- Attachment #1: Type: text/plain, Size: 4367 bytes --]
On 27/02/12 13:45, Jack Mitchell wrote:
> I am having issues compiling the systemd-image for beaglebone under
> Angstrom. I receive the following error message which seems to state
> that 'install' is missing, is anyone else having trouble or could
> provide some insight to this?
>
> ERROR: Function failed: do_install (see
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/temp/log.do_install.16223
> for further information)
> + cd
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/git
> + do_install
> + oe_runmake -e install
> DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
> + '[' xmake = x ']'
> + bbnote make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
> 'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc'
> STRIPCMD=echo -e install
> DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
> + echo 'NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
> LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo
> -e install
> DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image'
> NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
> LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo
> -e install
> DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
> + make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
> 'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc'
> STRIPCMD=echo -e install
> DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
> /usr/bin/install -c -d
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/lib
> /usr/bin/install -c -d
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/bin
> /usr/bin/install -c -m 644 -D man/cpufreq-set.1
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/share/man/man1/cpufreq-set.1
> /usr/bin/install -c -d
> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/share/locale
> make: /usr/bin/install: Command not found
> make: *** [install-lib] Error 127
> make: *** Waiting for unfinished jobs....
> make: /usr/bin/install: Command not found
> make: *** [install-gmo] Error 127
> make: /usr/bin/install: Command not found
> make: *** [install-tools] Error 127
> Translating de make: /usr/bin/install: Command not found
> make: *** [install-man] Error 127
> ...... done.
> 54 translated messages.
> Translating fr ...... done.
> 45 translated messages, 7 fuzzy translations, 2 untranslated messages.
> Translating it ...... done.
> 54 translated messages.
> Translating cs ...... done.
> 45 translated messages, 7 fuzzy translations, 2 untranslated messages.
> Translating pt ...... done.
> 54 translated messages.
> Translating ca ...... done.
> 54 translated messages.
> + die 'oe_runmake failed'
> + bbfatal 'oe_runmake failed'
> + echo 'ERROR: oe_runmake failed'
> ERROR: oe_runmake failed
> + exit 1
>
>
> Regards,
> Jack.
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Ok, I fixed this finally! In archlinux `install` is not located in
/usr/bin/install but in /bin/install so a quick symlink and that was
fixed. However, should bitbake be going into my system to use install
like this, and should it be hard-coded in cpufrequtils?
Jack.
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
[-- Attachment #2: Type: text/html, Size: 6026 bytes --]
next prev parent reply other threads:[~2012-03-15 10:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-27 13:45 cpufrequtils do_install issue Jack Mitchell
2012-03-15 10:35 ` Jack Mitchell [this message]
2012-04-02 16:56 ` Khem Raj
2012-04-03 7:58 ` Jack Mitchell
2012-04-03 13:42 ` Khem Raj
2012-04-03 18:30 ` Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F61C5DF.8090705@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.