From: Jack Mitchell <ml@communistcode.co.uk>
To: meta-ti@yoctoproject.org
Subject: Re: u-boot failure
Date: Thu, 15 Mar 2012 11:02:59 +0000 [thread overview]
Message-ID: <4F61CC63.6000305@communistcode.co.uk> (raw)
In-Reply-To: <4F61C860.2030701@mlbassoc.com>
On 15/03/12 10:45, Gary Thomas wrote:
> On 2012-03-15 04:29, Jack Mitchell wrote:
>> Trying to compile the systemd-image from Angstrom for the BeagleBone
>> this morning and I ran into a few errors, the first one being in
>> meta-ti and u-boot related:
>>
>> ERROR: Function failed: do_compile (see
>>
>> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/temp/log.do_compile.18432
>> for further information)
>> NOTE: make CROSS_COMPILE=arm-angstrom-linux-gnueabi- all
>> for dir in tools examples/standalone examples/api arch/arm/cpu/armv7
>>
>> /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/arch/arm/cpu/armv7/
>> ; do \
>> make -C $dir _depend ; done
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/tools'
>> make[1]: Nothing to be done for `_depend'.
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/tools'
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/examples/standalone'
>> make[1]: Nothing to be done for `_depend'.
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/examples/standalone'
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/examples/api'
>> make[1]: Nothing to be done for `_depend'.
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/examples/api'
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/arch/arm/cpu/armv7'
>> make[1]: Nothing to be done for `_depend'.
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/arch/arm/cpu/armv7'
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/arch/arm/cpu/armv7'
>> make[1]: Nothing to be done for `_depend'.
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/arch/arm/cpu/armv7'
>> make -C tools all
>> make[1]: Entering directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/tools'
>> *make[1]: *** No rule to make target
>> `/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/include/stddef.h',
>> needed by `crc32.o'. Stop.*
>> make[1]: Leaving directory
>> `/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/beaglebone-angstrom-linux-gnueabi/u-boot-2011.09+git-r26/git/tools'
>> make: *** [tools] Error 2
>> ERROR: oe_runmake failed
>>
>> Could anyone shed any light on this?
>
> What's your build host?
>
> It looks like your host gcc has some install problems (that missing
> file is part of the base installation, at least on Fedora)
>
Ok, I fixed it thanks for the nudge in the right direction Gary!
I had updated my hosts GCC inbetween builds, so I performed -c
cleasstate u-boot recompiled and it picked up my new GCC 4.6.3
libraries, rather than the non-existant 4.6.2 libraries it was
configured to use.
Cheers!
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
prev parent reply other threads:[~2012-03-15 11:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-15 10:29 u-boot failure Jack Mitchell
2012-03-15 10:45 ` Gary Thomas
2012-03-15 11:02 ` Jack Mitchell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F61CC63.6000305@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.