* build error after recent pull
@ 2012-03-19 16:02 jfabernathy
2012-03-19 18:46 ` Tom Zanussi
2012-03-19 18:55 ` Gary Thomas
0 siblings, 2 replies; 13+ messages in thread
From: jfabernathy @ 2012-03-19 16:02 UTC (permalink / raw)
To: yocto@yoctoproject.org
Just did a git pull today on poky and meta-intel. I tried to rebuild
meta-sugarbay again and got a build error. Not sure why yet. Not
critical, just a spot check of things.
------------------
NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928,
/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see
/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
for further information)
ERROR: Logfile of failure stored in:
/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
Log data follows:
| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see
/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
for further information)
| NOTE: make -j 8
| make[1]: Entering directory
`/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory
`/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target
`/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
needed by `glapi_dispatch.o'. Stop.
| make[2]: Leaving directory
`/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory
`/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928
(/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
failed with exit code '1'
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 16:02 build error after recent pull jfabernathy
@ 2012-03-19 18:46 ` Tom Zanussi
2012-03-19 18:55 ` Gary Thomas
1 sibling, 0 replies; 13+ messages in thread
From: Tom Zanussi @ 2012-03-19 18:46 UTC (permalink / raw)
To: jfabernathy; +Cc: yocto@yoctoproject.org
No problem seen here...
NOTE: Tasks Summary: Attempted 4825 tasks of which 474 didn't need to be
rerun and all succeeded.
For reference, here are the poky and meta-intel commits I built with:
poky/master:
commit a9873f12e5ba11e1307440901d07e9642e9f53bf
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sun Mar 18 00:02:22 2012 +0000
pigz: Ensure DEPENDS on zlib exists for native and target versions
meta-intel/master:
commit 9124870a6bcd99ebaeb0342f4fedf14dc1afebd8
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Tue Mar 13 10:10:38 2012 -0500
meta-emenlow: switch to linux-yocto-3.2 kernel
Tom
On Mon, 2012-03-19 at 12:02 -0400, jfabernathy wrote:
> Just did a git pull today on poky and meta-intel. I tried to rebuild
> meta-sugarbay again and got a build error. Not sure why yet. Not
> critical, just a spot check of things.
> ------------------
>
>
> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
> NOTE: Running task 1723 of 5148 (ID: 1928,
> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
> ERROR: Function failed: do_compile (see
> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
> for further information)
> ERROR: Logfile of failure stored in:
> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
> Log data follows:
> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
> 'bit-64', 'x86_64-linux', 'common']
> | ERROR: Function failed: do_compile (see
> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
> for further information)
> | NOTE: make -j 8
> | make[1]: Entering directory
> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
> | Making sources for autoconf
> | make[2]: Entering directory
> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
> | make[2]: *** No rule to make target
> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
> needed by `glapi_dispatch.o'. Stop.
> | make[2]: Leaving directory
> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
> | make[1]: *** [subdirs] Error 1
> | make[1]: Leaving directory
> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
> | make: *** [default] Error 1
> | ERROR: oe_runmake failed
> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
> ERROR: Task 1928
> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
> failed with exit code '1'
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 16:02 build error after recent pull jfabernathy
2012-03-19 18:46 ` Tom Zanussi
@ 2012-03-19 18:55 ` Gary Thomas
2012-03-19 18:59 ` jfabernathy
1 sibling, 1 reply; 13+ messages in thread
From: Gary Thomas @ 2012-03-19 18:55 UTC (permalink / raw)
To: yocto
On 2012-03-19 10:02, jfabernathy wrote:
> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
> ------------------
>
>
> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
> Log data follows:
> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
> | NOTE: make -j 8
> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
> | Making sources for autoconf
> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
> `glapi_dispatch.o'. Stop.
> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
> | make[1]: *** [subdirs] Error 1
> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
> | make: *** [default] Error 1
> | ERROR: oe_runmake failed
> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
What's your build host?
Was this build from scratch? There was a discussion of much the
same error on the meta-ti list last week where the host GCC was
updated between two subsequent builds that gave this error.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 18:55 ` Gary Thomas
@ 2012-03-19 18:59 ` jfabernathy
2012-03-19 19:03 ` Gary Thomas
0 siblings, 1 reply; 13+ messages in thread
From: jfabernathy @ 2012-03-19 18:59 UTC (permalink / raw)
To: yocto
On 03/19/2012 02:55 PM, Gary Thomas wrote:
> On 2012-03-19 10:02, jfabernathy wrote:
>> Just did a git pull today on poky and meta-intel. I tried to rebuild
>> meta-sugarbay again and got a build error. Not sure why yet. Not
>> critical, just a spot check of things.
>> ------------------
>>
>>
>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>> NOTE: Running task 1723 of 5148 (ID: 1928,
>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>> ERROR: Function failed: do_compile (see
>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>> for further information)
>> ERROR: Logfile of failure stored in:
>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>> Log data follows:
>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
>> 'bit-64', 'x86_64-linux', 'common']
>> | ERROR: Function failed: do_compile (see
>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>> for further information)
>> | NOTE: make -j 8
>> | make[1]: Entering directory
>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>> | Making sources for autoconf
>> | make[2]: Entering directory
>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>> | make[2]: *** No rule to make target
>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>> needed by
>> `glapi_dispatch.o'. Stop.
>> | make[2]: Leaving directory
>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>> | make[1]: *** [subdirs] Error 1
>> | make[1]: Leaving directory
>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>> | make: *** [default] Error 1
>> | ERROR: oe_runmake failed
>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>> ERROR: Task 1928
>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>> do_compile) failed with exit code '1'
>
> What's your build host?
>
> Was this build from scratch? There was a discussion of much the
> same error on the meta-ti list last week where the host GCC was
> updated between two subsequent builds that gave this error.
>
Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
3.0.0-16-generic #29-Ubuntu SMP)
gcc is 4.6.1
Jim A
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 18:59 ` jfabernathy
@ 2012-03-19 19:03 ` Gary Thomas
2012-03-19 19:04 ` jfabernathy
0 siblings, 1 reply; 13+ messages in thread
From: Gary Thomas @ 2012-03-19 19:03 UTC (permalink / raw)
To: yocto
On 2012-03-19 12:59, jfabernathy wrote:
> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>> On 2012-03-19 10:02, jfabernathy wrote:
>>> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
>>> ------------------
>>>
>>>
>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>> Log data follows:
>>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>> | NOTE: make -j 8
>>> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>> | Making sources for autoconf
>>> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
>>> `glapi_dispatch.o'. Stop.
>>> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>> | make[1]: *** [subdirs] Error 1
>>> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>> | make: *** [default] Error 1
>>> | ERROR: oe_runmake failed
>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
>>
>> What's your build host?
>>
>> Was this build from scratch? There was a discussion of much the
>> same error on the meta-ti list last week where the host GCC was
>> updated between two subsequent builds that gave this error.
>>
> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)
>
> gcc is 4.6.1
>
Was your build from scratch? Do you use [extant] sstate cache?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 19:03 ` Gary Thomas
@ 2012-03-19 19:04 ` jfabernathy
2012-03-19 19:13 ` Gary Thomas
0 siblings, 1 reply; 13+ messages in thread
From: jfabernathy @ 2012-03-19 19:04 UTC (permalink / raw)
To: yocto
On 03/19/2012 03:03 PM, Gary Thomas wrote:
> On 2012-03-19 12:59, jfabernathy wrote:
>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>> Just did a git pull today on poky and meta-intel. I tried to
>>>> rebuild meta-sugarbay again and got a build error. Not sure why
>>>> yet. Not critical, just a spot check of things.
>>>> ------------------
>>>>
>>>>
>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>> NOTE: Running task 1723 of 5148 (ID: 1928,
>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>> do_compile)
>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>> ERROR: Function failed: do_compile (see
>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>> for further information)
>>>> ERROR: Logfile of failure stored in:
>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>> Log data follows:
>>>> | DEBUG: SITE files ['endian-little', 'common-linux',
>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>> | ERROR: Function failed: do_compile (see
>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>> for further information)
>>>> | NOTE: make -j 8
>>>> | make[1]: Entering directory
>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>> | Making sources for autoconf
>>>> | make[2]: Entering directory
>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>> | make[2]: *** No rule to make target
>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>>>> needed by
>>>> `glapi_dispatch.o'. Stop.
>>>> | make[2]: Leaving directory
>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>> | make[1]: *** [subdirs] Error 1
>>>> | make[1]: Leaving directory
>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>> | make: *** [default] Error 1
>>>> | ERROR: oe_runmake failed
>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>> ERROR: Task 1928
>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>> do_compile) failed with exit code '1'
>>>
>>> What's your build host?
>>>
>>> Was this build from scratch? There was a discussion of much the
>>> same error on the meta-ti list last week where the host GCC was
>>> updated between two subsequent builds that gave this error.
>>>
>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
>> 3.0.0-16-generic #29-Ubuntu SMP)
>>
>> gcc is 4.6.1
>>
>
> Was your build from scratch? Do you use [extant] sstate cache?
>
I had a preview successful build and just reran that after bitbake -c
cleanall core-image-sato
JIm A
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 19:04 ` jfabernathy
@ 2012-03-19 19:13 ` Gary Thomas
2012-03-19 19:25 ` jfabernathy
0 siblings, 1 reply; 13+ messages in thread
From: Gary Thomas @ 2012-03-19 19:13 UTC (permalink / raw)
To: yocto
On 2012-03-19 13:04, jfabernathy wrote:
> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>> On 2012-03-19 12:59, jfabernathy wrote:
>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
>>>>> ------------------
>>>>>
>>>>>
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>> Log data follows:
>>>>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>> | NOTE: make -j 8
>>>>> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>> | Making sources for autoconf
>>>>> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
>>>>> `glapi_dispatch.o'. Stop.
>>>>> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>> | make[1]: *** [subdirs] Error 1
>>>>> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>> | make: *** [default] Error 1
>>>>> | ERROR: oe_runmake failed
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
>>>>
>>>> What's your build host?
>>>>
>>>> Was this build from scratch? There was a discussion of much the
>>>> same error on the meta-ti list last week where the host GCC was
>>>> updated between two subsequent builds that gave this error.
>>>>
>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)
>>>
>>> gcc is 4.6.1
>>>
>>
>> Was your build from scratch? Do you use [extant] sstate cache?
>>
> I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato
Do you have rm_work in your local.conf?
Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri
BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?)
stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like
and it will completely rebuild the image every time.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 19:13 ` Gary Thomas
@ 2012-03-19 19:25 ` jfabernathy
2012-03-19 20:25 ` Gary Thomas
0 siblings, 1 reply; 13+ messages in thread
From: jfabernathy @ 2012-03-19 19:25 UTC (permalink / raw)
To: yocto
On 03/19/2012 03:13 PM, Gary Thomas wrote:
> On 2012-03-19 13:04, jfabernathy wrote:
>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>> Just did a git pull today on poky and meta-intel. I tried to
>>>>>> rebuild meta-sugarbay again and got a build error. Not sure why
>>>>>> yet. Not critical, just a spot check of things.
>>>>>> ------------------
>>>>>>
>>>>>>
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928,
>>>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>> do_compile)
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>> ERROR: Function failed: do_compile (see
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>> for further information)
>>>>>> ERROR: Logfile of failure stored in:
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>> Log data follows:
>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux',
>>>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>> | ERROR: Function failed: do_compile (see
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>> for further information)
>>>>>> | NOTE: make -j 8
>>>>>> | make[1]: Entering directory
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>> | Making sources for autoconf
>>>>>> | make[2]: Entering directory
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>> | make[2]: *** No rule to make target
>>>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>>>>>> needed by
>>>>>> `glapi_dispatch.o'. Stop.
>>>>>> | make[2]: Leaving directory
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>> | make[1]: Leaving directory
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>> | make: *** [default] Error 1
>>>>>> | ERROR: oe_runmake failed
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>> ERROR: Task 1928
>>>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>> do_compile) failed with exit code '1'
>>>>>
>>>>> What's your build host?
>>>>>
>>>>> Was this build from scratch? There was a discussion of much the
>>>>> same error on the meta-ti list last week where the host GCC was
>>>>> updated between two subsequent builds that gave this error.
>>>>>
>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
>>>> 3.0.0-16-generic #29-Ubuntu SMP)
>>>>
>>>> gcc is 4.6.1
>>>>
>>>
>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>
>> I had a preview successful build and just reran that after bitbake -c
>> cleanall core-image-sato
>
> Do you have rm_work in your local.conf?
No to question on rm_work in local.conf
>
> Try this:
> % bitbake -c cleansstate mesa-dri
> % bitbake mesa-dri
This work without errors. I'm now doing bitbake core-image-sato to see
if it completes.
>
> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much -
> images don't have much (any?)
> stuff that needs to get cleaned. You can run 'bitbake
> core-image-sato' as many times as you like
> and it will completely rebuild the image every time.
>
>
So if I do a git pull and want to retest with new stuff, just bitbake
core-image-sato or should I do something with cleansstate??
JIm A
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 19:25 ` jfabernathy
@ 2012-03-19 20:25 ` Gary Thomas
2012-03-19 20:49 ` jfabernathy
0 siblings, 1 reply; 13+ messages in thread
From: Gary Thomas @ 2012-03-19 20:25 UTC (permalink / raw)
To: yocto
On 2012-03-19 13:25, jfabernathy wrote:
> On 03/19/2012 03:13 PM, Gary Thomas wrote:
>> On 2012-03-19 13:04, jfabernathy wrote:
>>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>>> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
>>>>>>> ------------------
>>>>>>>
>>>>>>>
>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>>> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>>>> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>> Log data follows:
>>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>>> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>>>> | NOTE: make -j 8
>>>>>>> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>> | Making sources for autoconf
>>>>>>> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
>>>>>>> `glapi_dispatch.o'. Stop.
>>>>>>> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>>> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>> | make: *** [default] Error 1
>>>>>>> | ERROR: oe_runmake failed
>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>>> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
>>>>>>
>>>>>> What's your build host?
>>>>>>
>>>>>> Was this build from scratch? There was a discussion of much the
>>>>>> same error on the meta-ti list last week where the host GCC was
>>>>>> updated between two subsequent builds that gave this error.
>>>>>>
>>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)
>>>>>
>>>>> gcc is 4.6.1
>>>>>
>>>>
>>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>>
>>> I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato
>>
>> Do you have rm_work in your local.conf?
>
> No to question on rm_work in local.conf
>>
>> Try this:
>> % bitbake -c cleansstate mesa-dri
>> % bitbake mesa-dri
>
> This work without errors. I'm now doing bitbake core-image-sato to see if it completes.
>
>>
>> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?)
>> stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like
>> and it will completely rebuild the image every time.
>>
>>
> So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??
If you run just 'bitbake core-image-sato', any packages (recipes)
which have been changed that are used by the image will be rebuilt.
You should not have to clean anything for this to work properly.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 20:25 ` Gary Thomas
@ 2012-03-19 20:49 ` jfabernathy
2012-03-19 21:27 ` Gary Thomas
0 siblings, 1 reply; 13+ messages in thread
From: jfabernathy @ 2012-03-19 20:49 UTC (permalink / raw)
To: yocto
On 03/19/2012 04:25 PM, Gary Thomas wrote:
> On 2012-03-19 13:25, jfabernathy wrote:
>> On 03/19/2012 03:13 PM, Gary Thomas wrote:
>>> On 2012-03-19 13:04, jfabernathy wrote:
>>>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>>>> Just did a git pull today on poky and meta-intel. I tried to
>>>>>>>> rebuild meta-sugarbay again and got a build error. Not sure why
>>>>>>>> yet. Not critical, just a spot check of things.
>>>>>>>> ------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928,
>>>>>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>> do_compile)
>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>>>> ERROR: Function failed: do_compile (see
>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>> for further information)
>>>>>>>> ERROR: Logfile of failure stored in:
>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>> Log data follows:
>>>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux',
>>>>>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>>>> | ERROR: Function failed: do_compile (see
>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>> for further information)
>>>>>>>> | NOTE: make -j 8
>>>>>>>> | make[1]: Entering directory
>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>> | Making sources for autoconf
>>>>>>>> | make[2]: Entering directory
>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>> | make[2]: *** No rule to make target
>>>>>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>>>>>>>> needed by
>>>>>>>> `glapi_dispatch.o'. Stop.
>>>>>>>> | make[2]: Leaving directory
>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>>>> | make[1]: Leaving directory
>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>> | make: *** [default] Error 1
>>>>>>>> | ERROR: oe_runmake failed
>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>>>> ERROR: Task 1928
>>>>>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>> do_compile) failed with exit code '1'
>>>>>>>
>>>>>>> What's your build host?
>>>>>>>
>>>>>>> Was this build from scratch? There was a discussion of much the
>>>>>>> same error on the meta-ti list last week where the host GCC was
>>>>>>> updated between two subsequent builds that gave this error.
>>>>>>>
>>>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
>>>>>> 3.0.0-16-generic #29-Ubuntu SMP)
>>>>>>
>>>>>> gcc is 4.6.1
>>>>>>
>>>>>
>>>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>>>
>>>> I had a preview successful build and just reran that after bitbake
>>>> -c cleanall core-image-sato
>>>
>>> Do you have rm_work in your local.conf?
>>
>> No to question on rm_work in local.conf
>>>
>>> Try this:
>>> % bitbake -c cleansstate mesa-dri
>>> % bitbake mesa-dri
>>
>> This work without errors. I'm now doing bitbake core-image-sato to
>> see if it completes.
>>
>>>
>>> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much -
>>> images don't have much (any?)
>>> stuff that needs to get cleaned. You can run 'bitbake
>>> core-image-sato' as many times as you like
>>> and it will completely rebuild the image every time.
>>>
>>>
>> So if I do a git pull and want to retest with new stuff, just bitbake
>> core-image-sato or should I do something with cleansstate??
>
> If you run just 'bitbake core-image-sato', any packages (recipes)
> which have been changed that are used by the image will be rebuilt.
> You should not have to clean anything for this to work properly.
>
After I fixed mesa-dri and started bitbake core-image-sato, it ran for a
long time and had a build failure similar to the first one on
kexec-tools. I did the bitbake -c cleansstate kexec-tools trick again
and restarted bitbake core-image-sato. Not sure why this is, but it
seems to work.
Jim a
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 20:49 ` jfabernathy
@ 2012-03-19 21:27 ` Gary Thomas
2012-03-19 21:38 ` jfabernathy
2012-03-20 9:08 ` jfabernathy
0 siblings, 2 replies; 13+ messages in thread
From: Gary Thomas @ 2012-03-19 21:27 UTC (permalink / raw)
To: yocto
On 2012-03-19 14:49, jfabernathy wrote:
> On 03/19/2012 04:25 PM, Gary Thomas wrote:
>> On 2012-03-19 13:25, jfabernathy wrote:
>>> On 03/19/2012 03:13 PM, Gary Thomas wrote:
>>>> On 2012-03-19 13:04, jfabernathy wrote:
>>>>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>>>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>>>>> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
>>>>>>>>> ------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>>>>> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>>>>>> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>> Log data follows:
>>>>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>>>>> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>>>>>> | NOTE: make -j 8
>>>>>>>>> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>> | Making sources for autoconf
>>>>>>>>> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
>>>>>>>>> `glapi_dispatch.o'. Stop.
>>>>>>>>> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>>>>> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>> | make: *** [default] Error 1
>>>>>>>>> | ERROR: oe_runmake failed
>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>>>>> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
>>>>>>>>
>>>>>>>> What's your build host?
>>>>>>>>
>>>>>>>> Was this build from scratch? There was a discussion of much the
>>>>>>>> same error on the meta-ti list last week where the host GCC was
>>>>>>>> updated between two subsequent builds that gave this error.
>>>>>>>>
>>>>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)
>>>>>>>
>>>>>>> gcc is 4.6.1
>>>>>>>
>>>>>>
>>>>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>>>>
>>>>> I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato
>>>>
>>>> Do you have rm_work in your local.conf?
>>>
>>> No to question on rm_work in local.conf
>>>>
>>>> Try this:
>>>> % bitbake -c cleansstate mesa-dri
>>>> % bitbake mesa-dri
>>>
>>> This work without errors. I'm now doing bitbake core-image-sato to see if it completes.
>>>
>>>>
>>>> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?)
>>>> stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like
>>>> and it will completely rebuild the image every time.
>>>>
>>>>
>>> So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??
>>
>> If you run just 'bitbake core-image-sato', any packages (recipes)
>> which have been changed that are used by the image will be rebuilt.
>> You should not have to clean anything for this to work properly.
>>
>
> After I fixed mesa-dri and started bitbake core-image-sato, it ran for a long time and had a build failure similar to the first one on kexec-tools. I did the bitbake -c cleansstate
> kexec-tools trick again and restarted bitbake core-image-sato. Not sure why this is, but it seems to work.
These errors should not happen - you should be able to update the
yocto meta-data and rebuild an image any time and not suffer such
problems.
Did you change anything else, especially with your host tools,
between the time your previous build completed and you did this
pull and rebuild? For example, running the Ubuntu package updater?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 21:27 ` Gary Thomas
@ 2012-03-19 21:38 ` jfabernathy
2012-03-20 9:08 ` jfabernathy
1 sibling, 0 replies; 13+ messages in thread
From: jfabernathy @ 2012-03-19 21:38 UTC (permalink / raw)
To: yocto
On 03/19/2012 05:27 PM, Gary Thomas wrote:
> On 2012-03-19 14:49, jfabernathy wrote:
>> On 03/19/2012 04:25 PM, Gary Thomas wrote:
>>> On 2012-03-19 13:25, jfabernathy wrote:
>>>> On 03/19/2012 03:13 PM, Gary Thomas wrote:
>>>>> On 2012-03-19 13:04, jfabernathy wrote:
>>>>>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>>>>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>>>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>>>>>> Just did a git pull today on poky and meta-intel. I tried to
>>>>>>>>>> rebuild meta-sugarbay again and got a build error. Not sure
>>>>>>>>>> why yet. Not critical, just a spot check of things.
>>>>>>>>>> ------------------
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure:
>>>>>>>>>> Succeeded
>>>>>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928,
>>>>>>>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>>>> do_compile)
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>>>>>> ERROR: Function failed: do_compile (see
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> for further information)
>>>>>>>>>> ERROR: Logfile of failure stored in:
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> Log data follows:
>>>>>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux',
>>>>>>>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>>>>>> | ERROR: Function failed: do_compile (see
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> for further information)
>>>>>>>>>> | NOTE: make -j 8
>>>>>>>>>> | make[1]: Entering directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>>> | Making sources for autoconf
>>>>>>>>>> | make[2]: Entering directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>>> | make[2]: *** No rule to make target
>>>>>>>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>>>>>>>>>> needed by
>>>>>>>>>> `glapi_dispatch.o'. Stop.
>>>>>>>>>> | make[2]: Leaving directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>>>>>> | make[1]: Leaving directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>>> | make: *** [default] Error 1
>>>>>>>>>> | ERROR: oe_runmake failed
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>>>>>> ERROR: Task 1928
>>>>>>>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>>>> do_compile) failed with exit code '1'
>>>>>>>>>
>>>>>>>>> What's your build host?
>>>>>>>>>
>>>>>>>>> Was this build from scratch? There was a discussion of much the
>>>>>>>>> same error on the meta-ti list last week where the host GCC was
>>>>>>>>> updated between two subsequent builds that gave this error.
>>>>>>>>>
>>>>>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
>>>>>>>> 3.0.0-16-generic #29-Ubuntu SMP)
>>>>>>>>
>>>>>>>> gcc is 4.6.1
>>>>>>>>
>>>>>>>
>>>>>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>>>>>
>>>>>> I had a preview successful build and just reran that after
>>>>>> bitbake -c cleanall core-image-sato
>>>>>
>>>>> Do you have rm_work in your local.conf?
>>>>
>>>> No to question on rm_work in local.conf
>>>>>
>>>>> Try this:
>>>>> % bitbake -c cleansstate mesa-dri
>>>>> % bitbake mesa-dri
>>>>
>>>> This work without errors. I'm now doing bitbake core-image-sato to
>>>> see if it completes.
>>>>
>>>>>
>>>>> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much
>>>>> - images don't have much (any?)
>>>>> stuff that needs to get cleaned. You can run 'bitbake
>>>>> core-image-sato' as many times as you like
>>>>> and it will completely rebuild the image every time.
>>>>>
>>>>>
>>>> So if I do a git pull and want to retest with new stuff, just
>>>> bitbake core-image-sato or should I do something with cleansstate??
>>>
>>> If you run just 'bitbake core-image-sato', any packages (recipes)
>>> which have been changed that are used by the image will be rebuilt.
>>> You should not have to clean anything for this to work properly.
>>>
>>
>> After I fixed mesa-dri and started bitbake core-image-sato, it ran
>> for a long time and had a build failure similar to the first one on
>> kexec-tools. I did the bitbake -c cleansstate
>> kexec-tools trick again and restarted bitbake core-image-sato. Not
>> sure why this is, but it seems to work.
>
> These errors should not happen - you should be able to update the
> yocto meta-data and rebuild an image any time and not suffer such
> problems.
>
> Did you change anything else, especially with your host tools,
> between the time your previous build completed and you did this
> pull and rebuild? For example, running the Ubuntu package updater?
>
I regularly do Ubuntu update, I guess I should make sure that is really
necessary. I know a few updates came in last week before the latest
pull. Not sure what they updated. Live and learn :-)
It seems to be completing now. I'm at 5140 of 5148. Thanks for the help
on this.
Jim A
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: build error after recent pull
2012-03-19 21:27 ` Gary Thomas
2012-03-19 21:38 ` jfabernathy
@ 2012-03-20 9:08 ` jfabernathy
1 sibling, 0 replies; 13+ messages in thread
From: jfabernathy @ 2012-03-20 9:08 UTC (permalink / raw)
To: yocto
On 03/19/2012 05:27 PM, Gary Thomas wrote:
> On 2012-03-19 14:49, jfabernathy wrote:
>> On 03/19/2012 04:25 PM, Gary Thomas wrote:
>>> On 2012-03-19 13:25, jfabernathy wrote:
>>>> On 03/19/2012 03:13 PM, Gary Thomas wrote:
>>>>> On 2012-03-19 13:04, jfabernathy wrote:
>>>>>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>>>>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>>>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>>>>>> Just did a git pull today on poky and meta-intel. I tried to
>>>>>>>>>> rebuild meta-sugarbay again and got a build error. Not sure
>>>>>>>>>> why yet. Not critical, just a spot check of things.
>>>>>>>>>> ------------------
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure:
>>>>>>>>>> Succeeded
>>>>>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928,
>>>>>>>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>>>> do_compile)
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>>>>>> ERROR: Function failed: do_compile (see
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> for further information)
>>>>>>>>>> ERROR: Logfile of failure stored in:
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> Log data follows:
>>>>>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux',
>>>>>>>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>>>>>> | ERROR: Function failed: do_compile (see
>>>>>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>>>>>> for further information)
>>>>>>>>>> | NOTE: make -j 8
>>>>>>>>>> | make[1]: Entering directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>>> | Making sources for autoconf
>>>>>>>>>> | make[2]: Entering directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>>> | make[2]: *** No rule to make target
>>>>>>>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h',
>>>>>>>>>> needed by
>>>>>>>>>> `glapi_dispatch.o'. Stop.
>>>>>>>>>> | make[2]: Leaving directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>>>>>> | make[1]: Leaving directory
>>>>>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>>>>>> | make: *** [default] Error 1
>>>>>>>>>> | ERROR: oe_runmake failed
>>>>>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>>>>>> ERROR: Task 1928
>>>>>>>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb,
>>>>>>>>>> do_compile) failed with exit code '1'
>>>>>>>>>
>>>>>>>>> What's your build host?
>>>>>>>>>
>>>>>>>>> Was this build from scratch? There was a discussion of much the
>>>>>>>>> same error on the meta-ti list last week where the host GCC was
>>>>>>>>> updated between two subsequent builds that gave this error.
>>>>>>>>>
>>>>>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64
>>>>>>>> 3.0.0-16-generic #29-Ubuntu SMP)
>>>>>>>>
>>>>>>>> gcc is 4.6.1
>>>>>>>>
>>>>>>>
>>>>>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>>>>>
>>>>>> I had a preview successful build and just reran that after
>>>>>> bitbake -c cleanall core-image-sato
>>>>>
>>>>> Do you have rm_work in your local.conf?
>>>>
>>>> No to question on rm_work in local.conf
>>>>>
>>>>> Try this:
>>>>> % bitbake -c cleansstate mesa-dri
>>>>> % bitbake mesa-dri
>>>>
>>>> This work without errors. I'm now doing bitbake core-image-sato to
>>>> see if it completes.
>>>>
>>>>>
>>>>> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much
>>>>> - images don't have much (any?)
>>>>> stuff that needs to get cleaned. You can run 'bitbake
>>>>> core-image-sato' as many times as you like
>>>>> and it will completely rebuild the image every time.
>>>>>
>>>>>
>>>> So if I do a git pull and want to retest with new stuff, just
>>>> bitbake core-image-sato or should I do something with cleansstate??
>>>
>>> If you run just 'bitbake core-image-sato', any packages (recipes)
>>> which have been changed that are used by the image will be rebuilt.
>>> You should not have to clean anything for this to work properly.
>>>
>>
>> After I fixed mesa-dri and started bitbake core-image-sato, it ran
>> for a long time and had a build failure similar to the first one on
>> kexec-tools. I did the bitbake -c cleansstate
>> kexec-tools trick again and restarted bitbake core-image-sato. Not
>> sure why this is, but it seems to work.
>
> These errors should not happen - you should be able to update the
> yocto meta-data and rebuild an image any time and not suffer such
> problems.
>
> Did you change anything else, especially with your host tools,
> between the time your previous build completed and you did this
> pull and rebuild? For example, running the Ubuntu package updater?
>
I never got a complete good build after I updated some unknown items in
Ubuntu 11.10 dev system and did a recent git pull until I did a
completely new bitbake core-image-sato to a new build directory. That
completed correctly.
So it seems we may need some Rules for users to follow when rebuilding
with the latest versions of Yocto. It seems there are some dependency on
certain key packages on the dev system not changing. Completely
rebuilding seems to be the safest method and given the time wasted when
things fail, might be the fastest.
Jim A
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-03-20 9:08 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-19 16:02 build error after recent pull jfabernathy
2012-03-19 18:46 ` Tom Zanussi
2012-03-19 18:55 ` Gary Thomas
2012-03-19 18:59 ` jfabernathy
2012-03-19 19:03 ` Gary Thomas
2012-03-19 19:04 ` jfabernathy
2012-03-19 19:13 ` Gary Thomas
2012-03-19 19:25 ` jfabernathy
2012-03-19 20:25 ` Gary Thomas
2012-03-19 20:49 ` jfabernathy
2012-03-19 21:27 ` Gary Thomas
2012-03-19 21:38 ` jfabernathy
2012-03-20 9:08 ` jfabernathy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.