Can't run HOB

Can't run HOB

[Gary Thomas]

When I try HOB on my tree, it parses the metadata to around 57%
and then brings up what I guess is a warning (sadly, it only shows
an empty dialogue with an "OK" button).  This seems to happen because
I have meta-ti in my bblayers.conf.  I also have this statement in
my local.conf:
   # Ignore troublesome TI recipes
   BBMASK = ".*/meta-ti/recipes-misc/"

Maybe HOB is not honouring the BBMASK?

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't run HOB

[Xu, Dongxiao]

On Mon, 2012-03-19 at 20:20 -0600, Gary Thomas wrote:
> When I try HOB on my tree, it parses the metadata to around 57%
> and then brings up what I guess is a warning (sadly, it only shows
> an empty dialogue with an "OK" button).  This seems to happen because
> I have meta-ti in my bblayers.conf.  I also have this statement in
> my local.conf:
>    # Ignore troublesome TI recipes
>    BBMASK = ".*/meta-ti/recipes-misc/"
> 
> Maybe HOB is not honouring the BBMASK?

Variables are still handled in bitbake server side, Hob only acts as a
bridge between user and bitbake server.

The phenomenon is strange since the code piece will detect if the error
msg is None or not. If it is None, it will not pop up the error dialog.

================================================================
    def handler_command_failed_cb(self, handler, msg):
        if msg:               
            lbl = "<b>Error</b>\n"         
            lbl = lbl + "%s\n\n" % msg     
            dialog = CrumbsMessageDialog(self, lbl,
gtk.STOCK_DIALOG_WARNING)
            dialog.add_button(gtk.STOCK_OK, gtk.RESPONSE_OK)
            response = dialog.run()        
            dialog.destroy()
================================================================

What's does it do if you click the "OK" button?

Thanks,
Dongxiao

> 

Re: Can't run HOB

[Gary Thomas]

On 2012-03-20 00:25, Xu, Dongxiao wrote:
> On Mon, 2012-03-19 at 20:20 -0600, Gary Thomas wrote:
>> When I try HOB on my tree, it parses the metadata to around 57%
>> and then brings up what I guess is a warning (sadly, it only shows
>> an empty dialogue with an "OK" button).  This seems to happen because
>> I have meta-ti in my bblayers.conf.  I also have this statement in
>> my local.conf:
>>     # Ignore troublesome TI recipes
>>     BBMASK = ".*/meta-ti/recipes-misc/"
>>
>> Maybe HOB is not honouring the BBMASK?
>
> Variables are still handled in bitbake server side, Hob only acts as a
> bridge between user and bitbake server.
>
> The phenomenon is strange since the code piece will detect if the error
> msg is None or not. If it is None, it will not pop up the error dialog.
>
> ================================================================
>      def handler_command_failed_cb(self, handler, msg):
>          if msg:
>              lbl = "<b>Error</b>\n"
>              lbl = lbl + "%s\n\n" % msg
>              dialog = CrumbsMessageDialog(self, lbl,
> gtk.STOCK_DIALOG_WARNING)
>              dialog.add_button(gtk.STOCK_OK, gtk.RESPONSE_OK)
>              response = dialog.run()
>              dialog.destroy()
> ================================================================
>
> What's does it do if you click the "OK" button?

It seems to stop scanning recipes immediately.  There is no text
along with the warning dialogue.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't run HOB

[Wang, Shane]

I suspect msg = "".

Can you add print(msg) at the beginning of the function? That's:

=========
     def handler_command_failed_cb(self, handler, msg):
         print(msg)
         if msg:
             lbl = "<b>Error</b>\n" lbl = lbl + "%s\n\n" % msg dialog =
=========

--
Shane

Xu, Dongxiao wrote on 2012-03-20:

> On Mon, 2012-03-19 at 20:20 -0600, Gary Thomas wrote:
>> When I try HOB on my tree, it parses the metadata to around 57%
>> and then brings up what I guess is a warning (sadly, it only shows
>> an empty dialogue with an "OK" button).  This seems to happen because
>> I have meta-ti in my bblayers.conf.  I also have this statement in
>> my local.conf:
>>    # Ignore troublesome TI recipes
>>    BBMASK = ".*/meta-ti/recipes-misc/"
>> Maybe HOB is not honouring the BBMASK?
> 
> Variables are still handled in bitbake server side, Hob only acts as a
> bridge between user and bitbake server.
> 
> The phenomenon is strange since the code piece will detect if the error
> msg is None or not. If it is None, it will not pop up the error dialog.
> 
> ===============================================================
> =
>     def handler_command_failed_cb(self, handler, msg):
>         if msg:
>             lbl = "<b>Error</b>\n" lbl = lbl + "%s\n\n" % msg dialog =
>             CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_WARNING)
>             dialog.add_button(gtk.STOCK_OK, gtk.RESPONSE_OK) response =
>             dialog.run() dialog.destroy()
> =============================================================== =
> 
> What's does it do if you click the "OK" button?
> 
> Thanks,
> Dongxiao
> 
>> 
> 
> 
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky

Re: Can't run HOB

[Gary Thomas]

[-- Attachment #1: Type: text/plain, Size: 2264 bytes --]

On 2012-03-20 07:18, Wang, Shane wrote:
> I suspect msg = "".
>
> Can you add print(msg) at the beginning of the function? That's:
>
> =========
>       def handler_command_failed_cb(self, handler, msg):
>           print(msg)
>           if msg:
>               lbl = "<b>Error</b>\n" lbl = lbl + "%s\n\n" % msg dialog =
> =========

Message attached (it's big).

Note: this setup (my metadata + meta-ti + yocto core) builds images just fine.

> Xu, Dongxiao wrote on 2012-03-20:
>
>> On Mon, 2012-03-19 at 20:20 -0600, Gary Thomas wrote:
>>> When I try HOB on my tree, it parses the metadata to around 57%
>>> and then brings up what I guess is a warning (sadly, it only shows
>>> an empty dialogue with an "OK" button).  This seems to happen because
>>> I have meta-ti in my bblayers.conf.  I also have this statement in
>>> my local.conf:
>>>     # Ignore troublesome TI recipes
>>>     BBMASK = ".*/meta-ti/recipes-misc/"
>>> Maybe HOB is not honouring the BBMASK?
>>
>> Variables are still handled in bitbake server side, Hob only acts as a
>> bridge between user and bitbake server.
>>
>> The phenomenon is strange since the code piece will detect if the error
>> msg is None or not. If it is None, it will not pop up the error dialog.
>>
>> ===============================================================
>> =
>>      def handler_command_failed_cb(self, handler, msg):
>>          if msg:
>>              lbl = "<b>Error</b>\n" lbl = lbl + "%s\n\n" % msg dialog =
>>              CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_WARNING)
>>              dialog.add_button(gtk.STOCK_OK, gtk.RESPONSE_OK) response =
>>              dialog.run() dialog.destroy()
>> =============================================================== =
>>
>> What's does it do if you click the "OK" button?
>>
>> Thanks,
>> Dongxiao
>>
>>>
>>
>>
>> _______________________________________________
>> poky mailing list
>> poky@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/poky
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

[-- Attachment #2: hob.err --]
[-- Type: text/plain, Size: 3401 bytes --]

Failure expanding variable do_compile, expression was     # TODO :: KERNEL_CC, should use for kernel module build?
    # TODO :: Check the 'unset's

    unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS

    do_make_scripts

    # Build the gpp (hlos) kernel space
    cd ${SYSLINK_ROOT}/ti/syslink/utils/hlos/knl/Linux && make \
        ARCH="${TARGET_ARCH}" \
        CROSS_COMPILE="${TARGET_PREFIX}" \
        SYSLINK_PLATFORM="${SYSLINKPLATFORM}" \
        SYSLINK_VARIANT="${SYSLINKVARIANT}" \
        SYSLINK_LOADER="${SYSLINKLOADER}" \
        SYSLINK_PKGPATH="${IPC_INSTALL_DIR}/packages" \
        KDIR="${STAGING_KERNEL_DIR}"

#    # Build the gpp (hlos) kernel space samples.
#    for sample in ${SYSLINKHLOSSAMPLES}; do
#        cd ${SYSLINK_ROOT}/ti/syslink/samples/hlos/$sample/knl/Linux && make \
#            ARCH="${TARGET_ARCH}" \
#            CROSS_COMPILE="${TARGET_PREFIX}" \
#            SYSLINK_PLATFORM="${SYSLINKPLATFORM}" \
#            SYSLINK_VARIANT="${SYSLINKVARIANT}" \
#            SYSLINK_LOADER="${SYSLINKLOADER}" \
#            SYSLINK_PKGPATH="${IPC_INSTALL_DIR}/packages" \
#            SYSLINK_SDK=EZSDK \
#            KDIR="${STAGING_KERNEL_DIR}"
#    done

    # Build the gpp (hlos) user space
    cd ${SYSLINK_ROOT}/ti/syslink/utils/hlos/usr/Linux && make \
        ARCH="${TARGET_ARCH}" \
        CROSS_COMPILE="${TARGET_PREFIX}" \
        TOOLCHAIN_PREFIX="${TOOLCHAIN_PATH}/${TARGET_PREFIX}" \
        SYSLINK_PLATFORM="${SYSLINKPLATFORM}" \
        SYSLINK_VARIANT="${SYSLINKVARIANT}" \
        SYSLINK_LOADER="${SYSLINKLOADER}" \
        SYSLINK_PKGPATH="${IPC_INSTALL_DIR}/packages"

    # Build the gpp (hlos) user space samples
    # First build the common lib for samples.
    cd ${SYSLINK_ROOT}/ti/syslink/samples/hlos/common/usr/Linux && make \
        ARCH="${TARGET_ARCH}" \
        CROSS_COMPILE="${TARGET_PREFIX}" \
        TOOLCHAIN_PREFIX="${TOOLCHAIN_PATH}/${TARGET_PREFIX}" \
        SYSLINK_PLATFORM="${SYSLINKPLATFORM}" \
        SYSLINK_VARIANT="${SYSLINKVARIANT}" \
        SYSLINK_LOADER="${SYSLINKLOADER}" \
        SYSLINK_SDK=EZSDK \
        SYSLINK_PKGPATH="${IPC_INSTALL_DIR}/packages"

    for sample in ${SYSLINKHLOSSAMPLES}; do
        cd ${SYSLINK_ROOT}/ti/syslink/samples/hlos/$sample/usr/Linux && make \
            ARCH="${TARGET_ARCH}" \
            CROSS_COMPILE="${TARGET_PREFIX}" \
            TOOLCHAIN_PREFIX="${TOOLCHAIN_PATH}/${TARGET_PREFIX}" \
            SYSLINK_PLATFORM="${SYSLINKPLATFORM}" \
            SYSLINK_VARIANT="${SYSLINKVARIANT}" \
            SYSLINK_LOADER="${SYSLINKLOADER}" \
            SYSLINK_SDK=EZSDK \
            SYSLINK_PKGPATH="${IPC_INSTALL_DIR}/packages"
    done

    # Build the dsp/arm (rtos) code (system and samples)
    # cd ${SYSLINK_ROOT}/ti/syslink && \
    #     ${XDC_INSTALL_DIR}/xdc --jobs=${BB_NUMBER_THREADS} -PR .
    export XDCOPTIONS=v
    cd ${SYSLINK_ROOT}/ti/syslink && \
        ${XDC_INSTALL_DIR}/xdc -P \
         `${XDC_INSTALL_DIR}/bin/xdcpkg ${SYSLINK_ROOT}/ti/syslink | grep -v samples`
    export XDCARGS="profile=debug"
    cd ${SYSLINK_ROOT}/ti/syslink && \
        ${XDC_INSTALL_DIR}/xdc --jobs=${BB_NUMBER_THREADS} -P \
         `${XDC_INSTALL_DIR}/bin/xdcpkg ${SYSLINK_ROOT}/ti/syslink | grep samples`
 which triggered exception TypeError: sequence item 95: expected string, int found