From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <4F6986AD.9050201@domain.hid>
Date: Wed, 21 Mar 2012 08:43:41 +0100
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <CB8ED574.1EE7C%glen@domain.hid>
In-Reply-To: <CB8ED574.1EE7C%glen@domain.hid>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] Linux Serial Does not work with
 CONFIG_XENO_OPT_PERVASIVE enabled
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/options/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Glen Wernersbach <glen@domain.hid>
Cc: "xenomai@xenomai.org" <xenomai@xenomai.org>

On 03/21/2012 05:46 AM, Glen Wernersbach wrote:
> I am going to start trying to see if I can figure out what is not getting
> set.
> 
> By the way. This board also has 4 other serial ports on a 8250.c driver. It
> also fails under the xeno build.

But the serial console works, right? So there is at least on serial port
working.

-- 
                                                                Gilles.